FLASH DS-512B-TAN-GG Alan Low Back Armless Brown Ribbed Office Chair Instruction Manual

June 12, 2024
FLASH

Flash-Furniture-logo

FLASH DS-512B-TAN-GG Alan Low Back Armless Brown Ribbed Office Chair

Product Information

  • Product Name: Armless Swivel Task Chair
  • Model Numbers: DS-512B-TAN-GG / DS-512B-LTGY-GG / DS-512B-BK-GG / DS-512B-BR-GG / DS-512B-WH-GG DS-512B-BK-BK-GG / DS-512B-BR-BK-GG / DS-512B-WH-BK-GG

Components:

  • Ax1 Seat
  • Bx1 Mechanism
  • Cx1 Cylinder
  • Dx1 Base
  • Ex5 Casters
  • Fx4 Washer
  • Gx4 Bolt
  • Hx1 Allen Wrench

Customer Service:
Email:
CustomerExperience@theubiquegroup.com

Phone: 866-552-2810

Product Usage Instructions

  1. Make sure to follow the static and dynamic weight capacity limits provided for this item. If you are unsure of the weight capacities, please contact our customer service at customerexperience@theubiquegroup.com or call 866-552-2810.
  2. Place the chair on a stable, level surface. Ensure that all casters are in contact with the flooring surface when in use. Do not use the chair if any instability is detected.
  3. Assemble the chair by following the steps below:

Step 1: Attach the Seat (A) to the Mechanism (B).
Step 2: Attach the Cylinder (C) and Base (D) to the Mechanism (B).
Step 3: Attach the Casters (E) to the Base (D) using the provided Washers (F) and Bolts (G). Use the Allen Wrench (H) to tighten the Bolts securely.

Note: For replacement parts or additional storage instructions, please contact our customer service at  customerexperience@theubiquegroup.com or call 866-552-2810.

Important Safety Guidelines:

  • This chair is intended for sitting only. Do not climb or stand on this item.
  • This chair is intended for indoor use only.
  • Store the chair indoors away from moisture.

For warranty details, please visit our website www.theubiquegroup.com or contact our customer service at customerexperience@theubiquegroup.com or call 866-552-2810.

ASSEMBLY INSTRUCTIONS

Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.

Caution:
Tighten all components securely before use. Failure to do so may result in personal injury. DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.

Warning:
CHOKING HAZARD – Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.

Customer Service Email : CustomerExperience@theubiquegroup.com
Phone: 866-552-2810
DS-512B-TAN-GG / DS-512B-LTGY-GG / DS-512B-BK-GG / DS-512B-BR-GG / DS-512B-WH- GG DS-512B-BK-BK-GG / DS-512B-BR-BK-GG / DS-512B-WH-BK-GG

Parts

How To Assemble?

Quality and Safety Guidelines

Please follow the static and dynamic weight capacity limits provided on this item. If you are unsure of the weight capacities for this product, email us at customerexperience@theubiquegroup.com or call 866-552-2810.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

FLASH User Manuals

Related Manuals