CASE Lucent Smoked Glass Frame Mirror Instruction Manual
- June 12, 2024
- case
Table of Contents
Lucent Mirror
Assembly Instructions
Lucent Smoked Glass Frame Mirror
Step 1. Take the bracket and mark the holes for screws at the desired
height, ensure that the bracket is straight using a spirit level.
Step 2. Use the correct wall fixing depending on your wall material/type
to connect the bracket to the wall.
WALL FIXING NOT SUPPLIED
Step 3. Carefully take the mirror and lift on top of the wall bracket so that the rear panel of the mirror rests neatly up against the rubber pad of the bracket and make sure that it is roughly central on the bracket.
Care Instructions
Lucent Mirror – designed by Matthew Hilton
To prolong the life of the product and retain its appearance and
functionality, we would like to give you some relevant information and care
advice:
This unit is manufactured from toughened glass.
The mirror has been made produced with UV bonded joints.
Care should be taken to make sure that no unnecessary stress is placed on the
mirror.
It is recommended that no abrasive cleaners or solvents are used to clean the
unit.
Please only use proprietary glass cleaners or alternatively, warm water with a
diluted mild detergent.
We thank you for purchasing this product and wish you many years of enjoyable
and functional use.
For more related products please visit:
casefurniture.com
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
info@casefurniture.com
casefurniture.com
Documents / Resources
| CASE
Lucent Smoked Glass Frame
Mirror
[pdf] Instruction Manual
Lucent, Lucent Smoked Glass Frame Mirror, Smoked Glass Frame Mirror, Glass
Frame Mirror, Frame Mirror, Mirror
---|---