case Eos Platform Lounger Instruction Manual
- June 9, 2024
- case
Table of Contents
case Eos Platform Lounger
Product Information
Eos Platform Lounger
The Eos outdoor range is a durable, lightweight, rustproof, and low- maintenance platform lounger made from aluminum with a Textilene sling. The frame is finished with a hardwearing powder coat that enhances its strength and durability. It’s all-weather/year-round features allow it to be used in various environments without any damage to its surface finish.
Care Instructions
- Regular periodic care and cleaning are recommended over occasional heavy-duty maintenance.
- Use a sponge or soft bristle brush with a cleaning solution of mild liquid soap and lukewarm water to clean the frame. Avoid using abrasive cleaners.
- Rinse and dry thoroughly for the best finish.
- In seaside use or indoor pool areas, regularly clean with mild soap and water to remove concentrated deposits and protect the finish.
- During cold and wet winter months, it is recommended to store the product. Do not store the lounger upside down.
Eos Platform Lounger – designed by Matthew Hilton
- To prolong the life of the product and retain its appearance and functionality, we would like to give you some relevant information and care advice:
- Made from aluminum with a Textilene sling, the Eos outdoor range is durable, lightweight, rustproof, and low maintenance. Regular periodic care and cleaning are recommended over occasional heavy-duty maintenance.
- The frame is finished in a hardwearing powder coat, which can be cleaned using a sponge/ soft bristle brush with a cleaning solution of mild liquid soap and lukewarm water.
- The use of abrasive cleaners should be avoided.
- Rinse and dry thoroughly for the best finish.
- Caution: In seaside use, salt can accumulate on the finish which may lead to surface damage.
- In indoor pool areas, chlorides can accumulate on the finish which may lead to surface damage.
- In both of the above environments, repeated cycles of condensation followed by evaporation will cause a build-up of these aggressive corrosives.
- Regular cleaning with mild soap and water will remove the concentrated deposits and protect the furniture as per the above instructions.
- Although the materials and finishes used are selected for their ‘all-weather/year-round’ characteristics, we recommend that the product is stored during cold and wet winter months.
- The lounger should not be stored upside down.
- We thank you for purchasing this product and wish you many years of enjoyable and functional use.
- For more related products please visit: casefurniture.com
Product Usage Instructions
Right-hand to left-hand platform adjustment
- Two people should turn the lounger onto its side on a soft flat surface. Remove the back sling and back adjustment plate using bolts A and D.
- With the frame on its back, remove and rotate the seat sling 180 degrees. Reattach using bolts B and C.
- Re-attach the seat sling at the opposite end of the frame using bolts B and C.
- Re-bolt the back adjustment plates into the same position on the opposite side using bolts A.
- Place the lounger back onto its side. Insert the back adjustment bars into the plates by tilting the backrest slightly and re-attach the two bolts B into the correct holes using bolts C and D.
Following these instructions will ensure that your Eos Platform Lounger will retain its appearance and functionality for many years of enjoyable use. For more related products, please visit casefurniture.com or contact info@casefurniture.com.
Instructions
Right-hand to left-hand platform adjustment
- Two people should turn the lounger onto its side on a soft the surface.
- Remove the back sling and back adjustment plate.
- With the frame on its back, remove and rotate the seat sling 180 degrees.
TOOLS
- Re-attach the seat sling at the opposite end of the frame
- Re-bolt the back adjustment plates into the same position on the opposite side using bolts A.
- Place the lounger back onto its side.
- Insert the back adjustment bars into the plates by tilting the backrest slightly and re-attach the two bolts B into the correct holes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>