COYOTE C2C34 Stainless Steel Built-In Gas Grill Installation Guide
- June 12, 2024
- COYOTE
Table of Contents
COYOTE C2C34 Stainless Steel Built-In Gas Grill
Product Information
The product is a Coyote Outdoor device. It is designed for outdoor use and comes with various features and functions.
For more information about the product, please visit the Coyote Outdoor website.
Product Usage Instructions
- Read the user manual carefully before using the product.
- Ensure that the product is placed and used in an outdoor environment.
- Follow the safety guidelines provided in the user manual.
- For installation instructions, scan the QR code provided on the product or visit the Coyote Outdoor website.
- Make sure to watch the brief safety and installation video for additional guidance.
- To turn on the device, follow the power-on instructions specified in the user manual.
- To utilize specific functions and features of the product, refer to the corresponding sections in the user manual.
- For maintenance and cleaning instructions, consult the user manual.
- If you encounter any issues or have questions about the product, contact customer support or visit the Coyote Outdoor website for assistance.
DIMENSIONAL RENDERINGS
When using a Coyote insulated jacket, you will want to build your island to the jackets Cutout and Overall Dimensions listed above (detailed on 2nd page). Once the jacket is installed, the grill will rest on/ inside the insulated jacket
Important Note to Installer: This file is not intended to replace your Owners’ Manual which contains specific safety requirements and consumer guidelines. Please refer to your Owners’ Manual prior to installing or operating your built-in grill.
NON-COMBUSTIBLE CONSTRUCTION Insulated Jacket NOT Required
- Combustible material can not be within 24″ of the grills frame
- This applies to all directions – horizontal & vertical
- Shaded area above on “TOP VIEW” illustrates the 24″ minimum requirement (not to scale for rendering purposes)
- The grill is designed to hang from the counter top with no support underneath
- Minimum rear clearance for the hood to open is 2″
- If you have a wall/partition behind the grill, the minimum rear clearance to that wall should be at least 7″ to allow for ventilation of the exhaust
COMBUSTIBLE CONSTRUCTION
Insulated Jacket Required – Model # CJAKTCC3
- If using combustible material within 24″ of the grill frame, you MUST use the corresponding Coyote Insulated Jacket
- Using a insulated jacket, does not waive any other standard installation procedure (ventilation, connections, etc)
- The jacket is designed to hang from the counter top with no support underneath
- Minimum clearance for hood to open is 2″
- If you have a wall/partition behind the grill, the minimum rear clearance to that wall should be at least 7″ to allow for ventilation of the exhaust
Ventilation Requirements:
- Regardless if you are using a combustible or non-combustible building material, you must include at least two vents within the island.
- These vents must be at least 20 sq. in. each and allow fresh air to move from the grill cabinet to the exterior environment.
- For a propane setup, the vents should be installed lower as propane is heavier than air.
- For a natural gas setup, the vents should be located higher in the island, as natural gas is lighter than air.
- Do not locate the two vents on the same wall of the island. Cross ventilation is key to allow any excess heat or trapped gas to dissipate.
Important Note to Installer:
This file is not intended to replace your Owners’ Manual which contains
specific safety requirements and consumer guidelines. Please refer to your
Owners’ Manual prior to installing or operating your built-in grill.
СОУОТЕ Outdoor Living
www.coyoteoutdoor.com
Scan QR Code for brief safety and installation video.