MAC AUDIO MPE 2.16 Car Hifi MAC Mobile Street Owner’s Manual

: June 16, 2024
: MAC AUDIO

Table of Contents

DEAR CUSTOMER,
POSITIONING AND SECURING THE SPEAKER SYSTEM (FIG. 1)
CONNECTING TO THE RADIO / AMPLIFIER (FIG. 2)
INSTALLING THE GRILLE (FIG. 3)
TECHNICAL DATA
CUSTOMERS SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAC AUDIO MPE 2.16 Car Hifi MAC Mobile Street

DEAR CUSTOMER,

We congratulate you on acquiring this MAC AUDIO Car Stereo Product.

Please read these instructions carefully so as to ensure optimum and disturbance-free functioning of the appliance. Technical modifications reserved.

At the end of the product’s useful life, please dispose of it at appropriate collection points provided in your country.

POSITIONING AND SECURING THE SPEAKER SYSTEM (FIG. 1)

Use the mounting positions provided in your vehicle. If the speakers do not fit, they can be placed in the rear window shelf.

Fig. 1

Depth
Driver diameter

Fig. 1A

Use mounting ring to mark position of speaker opening and fastening holes
Cut out opening and drill holes

Make sure that the subwoofer is secured in such a way that it cannot slip or slide. Use the screws provided for this purpose. Damage resulting from sudden changes in speed (e.g. hard braking) is not covered under the terms of our guarantee.

CONNECTING TO THE RADIO / AMPLIFIER (FIG. 2)

The speaker system should preferably be connected to an external power amplifier. This can provide the required electrical power and create corresponding dynamic reserves. The relevant instructions also contain the customized connection diagram for the operation of a speaker system.

Should you not have a power amplifier, the speakers can also be connected directly to the radio. The relevant operating instructions also contain the connection diagram for this situation.

Please note that only limited dynamic reserves will be available in this case. Excessively low outputs combined with high distortions can destroy your speakers.

INSTALLING THE GRILLE (FIG. 3)

TECHNICAL DATA

| RMS/max: Load capacity RMS / max.:| Impedance (nominal):| Frequency range:| Cutoff frequency(-ies)| Response:
---|---|---|---|---|---
MPE 2.16| 70 / 280 W| 4 0| 36 — 26000 Hz| 3800 Hz| 90 dB
MPE 2.13| 60 / 240 W| 4 0| 38 — 26000 Hz| 3800 Hz| 90 dB
MPE 69.3| 80 / 360 W| 4 0| 36 — 25000 Hz| 2800 / 4200 Hz| 91 dB
MPE 16.2| 70 / 280 W| 4 0| 38 — 24000 Hz| 4200 Hz| 90 dB
MPE 13.2| 60 / 240 W| 4 0| 40 — 24000 Hz| 4200 Hz| 90 dB
MPE 10.2| 50 / 200 W| 4 0| 45 — 24000 Hz| 4200 Hz| 89 dB

Congratulations! You have made a wise selection in becoming the owner of a MAC AUDIO HiFi equipment. Due to high quality MAC AUDIO HiFi products have earned an excellent reputation through the western world. And this high quality standard enables us to grant a 3-years warranty for MAC AUDIO HiFi products.

The equipment are checked and tested continuously during the entire production process. In case you have problems with your MAC AUDIO HiFi equipment, kindly observe the following:

The guarantee period commences with the purchase of the component and is applicable only to the original owner.
During the guarantee period we will rectify any defects due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or sub sequential damages, are excluded. The guarantee period is not altered by the fact that we have carried out guarantee work.
Unauthorized tampering with the equipment will invalidate this guarantee.
Consult your authorized dealer first, if guarantee service is needed. Should it prove necessary to return the component to the factory, please insure that
- the component is packed in original factory packing in good condition
- the quality control card has been filled out and enclosed with the component
- your enclose your receipt as proof of purchase.
Excluded from the guarantee are:
- Illuminates
- Wear parts
- Shipping damages, either readily apparent or concealed (claims for such damages must be lodged immediately with forwarding agent, the railway express office or post office).
- Scratches in cases, metal components, front panels, etc. (You must notify your dealer directly of such defects within three days of purchase.)
- Defects caused by incorrect installation or connection, by operation errors (see operating instructions), by overloading or by external force.
- Equipment’s which have been repaired incorrectly or modified or where the case has been opened by persons other than us.
- Consequential damages to other equipment’s.
- Reimbursement of cools, without our prior consent, when repairing damages by third parties.