MOOER MOC4 Purer Octave Polyphonic Octave Effects Pedal Owner’s Manual
- June 12, 2024
- Mooer
Table of Contents
MOC4 Purer Octave Polyphonic Octave Effects Pedal
Product Information
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct
voltage. Be sure to only use an AC adapter which supplies 9VDC, 120mA.
Unplug the AC power adapter when not in use or during electrical storms.
Precautions
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct
voltage. Be sure to only use an AC adapter which supplies 9V DC, 120mA. Unplug
the AC power adapter when not in use or during electrical storms
Location
- To avoid deformation, discoloration, or other serious damage, do not expose this unit to theft lowing conditions:
- Direct sunlight or other heat sources • Magnetic fields
- Excessively dusty or dirty locations • Strong vibrations or shocks
- High humidity or moisture
Radio Frequency Interference
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth
.Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Feature
- Precise polyphonic octave effects without any distorted signal
- 15 different octave modes and 1 DT(DETUNE) effect
- Three different working modes
- Individual control for SUB and UPPER
- Switchable bypass signal
Top Panel
-
Footswitch
Press to turn On/Off effect -
LED button
Indicate the status of the pedal. LED On/Off indicates the On/Off of the pedal. Press the button to turn kill/turn On the dry signal. RED for killing the dry signal; Blue for turn On the dry signal -
Power port
Connect to power 9V DC (center negative) power supply is recommended. -
Input4 ¼″mono audio jack. Connect to the guitar or the output of the other pedal.
-
Output ¼″mono audio jack. Connect to the input of the other pedal or audio device
-
way toggle 3-way toggle to switch between 3different working modes.
-
PANEL mode: the output signal is related to the knob directly; FAV A and FAV B are two preset modes, you can set the parameters in advance, then save them into the preset modes for recalling quickly
Notes If the parameters have been set in FAV A or FAV B, please confirm, and save it. Otherwise, the setting will be lost after being powered Off. -
SUB Rotate to adjust the sub-octave signal. Rotate to adjust the volume level of the sub-part in the DT(DETUNE) mode
-
UPPER Rotate to adjust the upper octave signal. Rotate to adjust the volume level of the upper part in the DT (DETUNE) mode.
-
Octave mode Rotate to select between 15 different octaves or select the pitch in DT (DETUNE) mode.
Effect List
No.
1| – SUB
1 OC| UPPER
/
---|---|---
2| -2 OCT| /
3| /| +1 OCT
4| /| +2 OCT
5| -1 OCT| +1 OCT
6| -1 OCT| +2 OCT
7| -1 OCT & -2 OCT| /
8| -2 OCT| +1 OCT
9| -2 OCT| +2 OCT
10| /| +1 OCT & +2 OCT
11| -1 OCT & -2 OCT| +1 OCT
12| -1 OCT & -2 OCT| +2 OCT
13| -1 OCT| +1 OCT & +2 OCT
14| -2 OCT| +1 OCT & +2 OCT
15| -1 OCT & -2 OCT| +1 OCT & +2 OCT
16| LOWER| RAISE
| |
Specifications
- INPUT ¼″mono audio jack (impedance value 470k Ohms)
- OUTPUT ¼″ mono audio jack (impedance value 100 Ohms)
- Power supply 9V DC (center negative)
- Current draw 120mA
- Dimension: 93.5（D）× 42（W）× 52mm（H）
- Weight: 157g
- Accessories: Owner’s manual
SHENZHEN MOOER AUDIO CO. LTD
6F, Unit D, Jincheng Building, Lucian 3rd Road,
Ba o’an 71 District, Shenzhen, China. 518133
SHENZHEN MOOER AUDIO CO. LTD
Made in China