Westfalia 985502 Hot-Wire Tabletop Foam Cutter WHS Instructions
- June 12, 2024
- Westfalia
Table of Contents
Westfalia 985502 Hot-Wire Tabletop Foam Cutter WHS
Product Information
Art. 98 55 02
The product is a device with a power supply socket and a wire clamp. It has
a rated voltage of 9 V and a rated current of 2 A. The temperature of the hot
wire is not specified. The device weighs 1154 g and has dimensions of 220 x
485 x 250 mm. The working table has dimensions of 375 mm x 210 mm. The power
supply is 230 V ~ 50 Hz with a rated power output voltage of 18 W and a
protection class of unknown value. The device comes with a mixing paddle that
weighs 88 g and has a size of 1.8 m.
Product Usage Instructions
- Before using the device, read the General Safety Notes and the safety notes provided in the user manual to avoid malfunctions, damage, or physical injury.
- Use the device according to the instructions provided in the user manual.
- Dispose of used packaging material carefully or store it out of the reach of children to avoid suffocation hazards.
- The device is not a toy and should not be used by children. Always supervise the device when in use and keep it out of reach of children or persons in need of supervision.
- Persons with limited physical, sensorial, or mental abilities should not use the device unless supervised and briefed for their safety by a qualified person.
- Be attentive and approach your work with circumspection to prevent accidents.
- Do not use the device when your reactivity is affected by alcohol consumption, medication, drugs, illness, or tiredness as it can cause grave injuries.
- Keep your work area clean to avoid accidents.
- Store the device in a dry, high located, or lockable place out of the reach of children.
- Do not use the device if it does not work properly or if it was damaged when falling.
Dear Customers,
Instruction manuals provide valuable hints for using your new device. They
enable you to use all functions, and they help you avoid misunderstandings and
prevent damage. Please take the time to read this manual carefully and keep it
for future reference.
PARTS
- Temperature setting knob
- Hot-wire clamp
- Parallel guide
- Wire coil with clamp
- Hot tip
- Circle point with slider
- Power supply socket
- Control lamp
TECHNICAL DATA
Hot-Wire Tabletop Foam Cutter WHS
- Rated voltage 9 V
- Rated current 2 A
- Temperature Hot Wire 260 °C – 680 °C
- Weight (Device) 1154 g
- Dimensions 220 x 485 x 250 mm
- Working Table 375 mm x 210 mm
Power supply
- Rated voltage ~230 V
- Rated Frequency 50 Hz
- Rated Power 18 W
- Output voltage 9 V
- Protection class
- Weight (Device) 88 g
- Size mixing paddle 1.8 m
Overview
- Unbox device
- Installation of the frame
- Installing the wire clamp
- Clamping the heating wire
- Inserting the parallel
- Locking the parallel guide
- Installation of the hot tip
- Installation of the circle point with slider
- Switching on and setting the temperature
OPERATING NOTES
- Note that the wire may lose tension due to heating. In this case, increase the tension of the wire.
- Different materials have different cutting temperatures. Make cutting tests on a test piece to find the optimum setting.
- If the cutting temperature is too high, you will notice that the edges have melted. In this case, reduce the temperature to produce clean cuts.
- If the cutting temperature is too low, you will have to apply too much pressure when cutting. The wire will bend and the cut will not be true to size. In this case, increase the temperature.
- Using the hot tip: While the hot wire reaches the set temperature after a few seconds, the hot tip takes longer to heat up. After 2 minutes at the latest, the hot tip should have reached operating temperature.
- The hot wire will most likely break close to the clamp. Cut the wire slightly above the damaged area and re-clamp it.
- Only use the wire supplied. Other wires have a different electrical resistance, which can destroy the transformer. Contact our customer service to reorder heating wire.
- Clean the heating wire regularly with steel wool or a wire brush so that no residues can clog the clamping mechanism. Always switch off the unit and allow it to cool down when working on it.
SAFETY NOTES
Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.
- Please read this manual carefully and use the unit only according to this manual.
- Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
- The unit is not a toy and does not belong in the hands of children. Never leave the unit unsupervised when in use. Keep it out of reach of children or persons in need of supervision. Children should be supervised to ensure that they do not play with the unit.▪
- Persons with limited physical, sensorial, or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
- Be attentive! Pay attention what you do. Approach your work with circumspection.
- Do not use the unit when your reactivity is affected by alcohol consumption, medication, drugs, illness or tiredness. One moment of abstraction operating the unit can cause grave injuries.
- Keep your work area clean. Disorder can cause accidents.
- Store the unit out of the reach of children in a dry, high located or lockable place.
- Do not use the unit when it does not work properly or it was damaged when falling down. Do not open the unit and do not try to repair it yourself. Please feel free to contact a professional or our customer service.
- Periodically check all nuts, bolts and other fixings and tighten where necessary.
- The appliance reaches high temperatures. Never touch the heating wire or the hot tip.
- Do not operate the appliance near flammable materials.
- Only use the appliance on a heat-resistant surface.
- Let the appliance cool down completely and disconnect it from the power supply before cleaning and storing it!
- Only use the appliance in well-ventilated areas. Toxic fumes may be produced during cutting.
EU DECLARATION OF CONFORMITY
Wir, die Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product
Hot-Wire Tabletop Foam Cutter WHS
Article No. 98 55 02
is according to the basic requirements, which are defined in the European
Directives and their amendments.
-
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS) -
2014/30/EU
Electromagnetic Compatibility (EMC)
EN 55014-1:2017+A11, 55014-2:1997+A1+A2+AC 61000-3-2:2014, EN 61000-3-3:2013 -
2014/35/EU
Low Voltage Directive (LVD)
EN IEC 61558-1:2019, EN 61558-2-16:2009+A1
EN 60335-1:2012+AC+A11+A13+A1+A14+A2+A15
EN 62233:2008+AC
The technical documentations are on file at the QA department of the Westfalia Werkzeug-company.
CUSTOMER SERVICES
DEUTSCHLAND
Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de
SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch
ÖSTERREICH
Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at
DISPOSAL
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in
mind that many of its components consist of valuable materials, which can be
recycled. Please do not discharge it in the rubbish bin, but check with your
local council for recycling facilities in your area.
References
- Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
- Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
- Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>