prolink DS-3601 Smart LED Bulb Installation Guide

: June 12, 2024
: PROLiNK

Table of Contents

Package Contents
Overview
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

prolink DS-3601 Smart LED Bulb Installation Guide

Package Contents

Notes:

The picture illlustrations in this document may diFFer from actual product.
If your package does not contain any of the above items, please contact your reseller immediately.

Overview

Bulb Behaviour	Description
Off	Unit is Off
On (White / Colour / Blinking)	Unit is On
Fast Blinking	Unit is in EZ Mode Configuration
Slow Blinking	Unit is in AP Mode Configuration
Activity	Action Required
---	---

To reset the bulb to factory
default| Power Off – Power On the bulb
for three (3) consecutive times
To switch between EZ Mode
and AP Mode configurations| Power Off – Power On the bulb
for three (3) consecutive times

Installation

A. Preparation

Place the Smart Bulb and Phone within three feet of the router.
Notes:
- Make sure the phone is connected to the router through 2.4GHz Wireless network.
- Smart Bulb is operating only at 2.4GHz Wireless N standard.
Download, install and create an account through Prolink mEzee App. Scan below QR code to download from Google Store or Apple App Store. Alternatively, search for “mEzee”.

For Google Assistant / Amazon Alexa users:
Step 1. Complete the steps in this Quick Installation Guide.
Step 2. Follow the setup instruction available from
https://prolink2u.com/smart-home/smart-bulb/ds-3601/download/

B. Setting up the Smart Blub

Plug the Smart Bulb into an E27 base socket and switch it on.
Launch the mEzee App and login with your account.
Confirm that the physical unit Smart Bulb is blinking fast, otherwise Power-Off Power-On three (3) consecutive times.
Tap Add Device or + on the top right-hand corner.
If your mobile phone Bluetooth is turned On, proceed with
Method A: Auto Add Configuration, otherwise proceed to
Method B: EZ Mode Configuration or
Method C: AP Mode Configuration.

Method A: Auto Add Configuration

Upon tapping Add Device or + from main screen, you will be prompted that there is a Device to be added.
Tap Go to add.
Tap + to add Smart Bulb and ensure it is selected.
Select your Wi-Fi name, enter the Wi-Fi password, and tap Confirm.
Once connected, proceed to name this device for easy reference and tap Done.

Method B: EZ Mode Configuration

Select Lighting and tap Light Source (BLE+Wi-Fi).
Toggle the top right-hand option to EZ Mode if it shows otherwise.
Confirm that the physical unit Smart Bulb is blinking fast, otherwise Power-Off Power-On three (3) consecutive times.
Check Confirm the light is blinking rapidly and tap Next.
Select your Wi-Fi name, enter the Wi-Fi password and tap Next.
Once connected, proceed to name this device for easy reference and tap Done.

Method C: AP Mode Configuration

Select Lighting and tap Light Source (BLE+Wi-Fi).
Toggle the top right-hand option to AP Mode if it shows otherwise.
Confirm that the physical unit Smart Bulb is blinking slow, otherwise Power-Off Power-On three (3) consecutive times.
Check Confirm the light is blinking slowly and tap Next
Select your Wi-Fi name, enter the Wi-Fi password and tap Next.
Tap Go to Connect and connect your mobile phone to Prolink-XXXX or SmartLife-XXXX SSID. If you get prompted the “SSID doesn’t have Internet access”, tap Connect and return back to the App.
Once connected, proceed to name this device for easy reference and tap Done.