NIKKEI Alarm Clock NR10 Instruction Manual

: June 7, 2024
: Nikkei

Table of Contents

POWER SUPPLY
TO SET THE TIME
TO SET THE ALARM
SNOOZE FUNCTION
**POWER FAILURE
**DRIPPING WARNING
**VENTILATION WARNING
Documents / Resources

Operator’s manual
Alarmclock _ NR10

_

LOCATION OF CONTROLS

Alarm On / Off Switch
Hour Set Button
Minute SEA Button
Sensor Touch Snooze Control
Time Set Button
Alarm Set Button
Display

POWER SUPPLY

Check the AC current is same as the instruction show on back plate of your unit and plugs the power cord into the AC outlet A blinking signal will appear Indicating the time.

TO SET THE TIME

Press the lime Set Button (5) and Hour Set Button (2) or Minute Button (3) together for hour and minute adjustment of the time. Please make sire setting time is AM or PM has indication (A dot will light in the left upper corner indicating that the time Is the PM range If your unit Is 12 hour version type).

TO SET THE ALARM

Depress the Alarm Set Button (1) and Hour Set Button (2) or Minute Set Button (3) together and slide the Alarm Oru`Off Switch to “ON’ (the alarm Indicator dot will appear at the bottom of right corner of the LED Display) for the desired time that you want to wake up.

SNOOZE FUNCTION

When you want a few extra minutes of sleep after the alarm wakes you, touch the Sensor Touch Snooze Control (4) the unit will shut Itself off and turn on again In exactly 9 minutes. You may repeat this operation as often as you like within a period of I hour 59 minutes after the pre-set wake time.

**POWER FAILURE

**

You can Insert a 9 volt battery In the unft. Should there be a power failure the clock will continue to function. You will not see this however because the battery does not illuminate the clock display. When the power is turn on again the display will Indicate the correct time. For clarity alarm clock do not work on battery. Replace the battery once a year.

**DRIPPING WARNING

**

The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product

**VENTILATION WARNING

**

The normal ventilation of the product shall not be Impeded for Intended use.
Power consumption:5 200mA
Standby power consumption : 5 5mA

Corrosion, oxidation, battery leakage, and any other gradually acidic defect of this nature will Invalidate the guarantee.

Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, Its accessory or packaging Indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipment waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic products. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product The recycling of materials will help conserve miter! resources. Please do not, therefore, dispose of your old electrical and electronic equipment with your household waste. For more detailed information about recycling cf this product, please contact yam local city dice, your household waste cispoeal service or the shop where you purchased the product.