EKVIP 025168 RGB Corner Lamp Instruction Manual
- June 13, 2024
- EKVIP
Table of Contents
EKVIP 025168 RGB Corner Lamp
Important! Read the user instructions carefully before use. Save them for future reference. Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com.
SAFETY INSTRUCTIONS
- The product must not be placed immediately over sources of heat, or where there are considerable fluctuations in sunlight, air flows or temperatures.
- Do not look directly at the light sources when they are switched on – risk of discomfort and eye damage.
- Do not use the product outdoors, expose it to rain or other precipitation, or immerse it in water or any other liquid – risk of short-circuiting and material damage.
- Protect the product from contact with sharp tools and hard, sharp edged objects – risk of malfunction and material damage.
- If the power cord or plug are damaged they must be replaced by an authorised service center to ensure safe use.
- The light source must only be replaced by an authorised service centre.
- An external mains adapter should as a minimum have double/reinforced insulation between the low voltage side and the power point.
SYMBOLS
| Read the instructions.
| For indoor use only.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
- Power supply: 5 VDC, 1 A
- Power: 4 W
- Luminous flux: 20 lm
- LEDs: 18 RGB
- Working temperature: –20 to 40°C
- Range of remote control: 3 m
- Cord length: 1.5 m
- Size: 10 x 40 x Ø2.3 cm
DESCRIPTION
Table lamp with RGB LED strip and remote control. Switch from impressive light with pulsating colours to soft and constant, at a few touches of the button. The lamp is dimmable. Charged via the supplied USB cable. Nonreplaceable light sources.
PARTS
- Light
- Power switch
- Remote control
HOW TO USE THE BUTTON
Button | Button name | Function |
---|---|---|
__ | **** |
Increase
| Short press button to increase LED brightness.
Extended press button to increase the light speed.
|
Decrease
| Short press button to decrease LED brightness.
Extended press button to decrease the light speed.
| Switch| ON/OFF
| RGB| RGB color function
| Singal button| Receiver
HOW TO USE THE REMOTER
Button | Button name | Function |
---|---|---|
Dimmer (+) | Increase the LED brightness | |
Dimmer (-) | Decrease the LED brightness |
| Switch| Press for OFF
| Switch| Press for ON
| Color key| Red LED lighting
| Color key| Green LED lighting
| Color key| Blue LED lighting
| Color key| White LED lighting
| Multi function| Different lighting effects
|
Speed button
| “+” for quick “-” for slow