olympia electronics BS-580/L 230V Beacon with High Power LED Instruction Manual

June 12, 2024
olympia electronics

olympia electronics - logo BS-580/L 230V Beacon with High Power LED
Instruction Manual BS-580/L
230V BEACON WITH HIGH POWER LED

TECHNICAL CHARACTERISTICS

OPERATION VOLTAGE 220-240V AC/50-60Hz
MAXIMUM POWER CONSUMPTION 0.95W / 2VA
LIGHT SOURCE 1 Power LED
DEGREES OF COVER PROTECTION IP20
PRODUCED IN ACCORDANCE WITH EN 50130-4 , ΕΝ 61000-6-3
OPERATION TEMPERATURE RANGE o0 to 60 C
CONSTRUCTION MATERIAL ABS/PC, PC
RELATIVE HUMIDITY  Up to 95%
EXTERNAL DIMENSIONS 200gr.
TYPICAL WEIGHT 2 years
GUARANTEE 100 x 75mm

Thank you for your trust in our products
Olympia Electronics – European manufacturer

GENERAL

The ΒS-580/L is an optical warning device which can be connected to any 230V AC voltage and starts to blink immediately.
They are installed at a height of about 2-3m, indoors or outdoors but away from rain.

INSTALLATION

  1. Unscrew counter clockwise and remove the plastic cover of the beacon.
  2. Remove the white plastic with the PCB.
  3. Pass the power cable through the respected enterance hole of the plastic base. Mount the plastic base with the mounting accessories.
  4. Connect the power cable to the terminal block.
  5. Replace the removed parts from the previous steps and the device is ready to work.

Connection Diagram

olympia electronics BS-580 L 230V Beacon with High Power LED - Connection
Diagram

Dimensional Drawing

olympia electronics BS-580 L 230V Beacon with High Power LED - Dimensional
DrawingOlympia Electronics guarantees the quality, condition and function of the goods.
The warranty period is specified in the official catalog of Olympia Electronics, but also in technical brochure accompanying each product. This warranty is void if the buyer does not follows the technical instructions included in the official documents provided by the Olympia Electronics or if the buyer modifies the goods supplied or does any repair or readjustment by a third party, unless Olympia Electronics has fully agree with them, in writing. Damaged products can returned to our company’s facilities for repair or replacement, as long as the warranty period. Olympia Electronics reserves the right to repair or replace the returned goods and whether or not to charge the buyer, depending on the cause of the damage. THE Olympia Electronics reserves the right to charge or not charge the buyer for shipping costs.

olympia electronics - logoCENTRAL
72° km P.E.O. Thessaloniki-Katerini
P.C. 60300 Postal Code 06 Aeginio, Pieria, Greece
www.olympia-electronics.com
info@olympia-electronics.gr

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

olympia electronics User Manuals

Related Manuals