olympia electronics BSR-5036-A Manual Call Point User Manual
- June 12, 2024
- olympia electronics
Table of Contents
BSR-5036/A
Addressable manual call point
TECHNICAL CHARACTERISTICS
| OPERATION VOLTAGE | 21-28V |
|---|---|
| STANDBY CONSUMPTION | 1mA |
| ALARM CONSUMPTION | 1.5mA (with activation LED) |
| TYPE | Type A |
| USE | Indoor |
| DEGREES OF COVER PROTECTION | IP 20 |
| PRODUCED IN ACCORDANCE WITH | EN 54-11 |
| OPERATION TEMPERATURE RANGE | -10 to 70 °C |
| RELATIVE HUMIDITY | Up to 95% |
| CONSTRUCTION MATERIALS | ABS/PC |
| EXTERNAL DIMENSIONS | 98x94x58mm |
| TYPICAL WEIGHT | 190gr. |
| GUARANTEE | 2 years |
Description
BSR-5036/A is a addressable manual call point which activates the fire
detection panel.
It co-operates with BSR-1116 and BSR-2100 series panels.
It is essential for it to exist in co-operation with the detectors. At least
one button has to be placed in every fire detection system, near to the main
control panel.
By pushing the clear plastic cover, the button activates the alarm system. The
clear plastic cover does not brake but can be reset to its original position
with the special plastic key which is included in the package. With this way
you can test a specific button as well maintenance the fire detection panel.
In every fire detection system it is essential that you place one button
besides the control panel and the rest mainly in corridors and exits of the
building.
It is mounted in a clearly visible spot, near at exit or ladder and at a
height of 1,5 meters.
A red coloured LED that blinks periodically in standby detection mode, is a
power indication LED and indicator for the good operation of the device. When
a button issues an alarm the LED lights. When we silence the sirens the LED
remains lit to show us the detector that issued the alarm.
The LED goes off when we RESET the panel.
Each button has an address with which it is recognized from the panel.
It is forbidden for two devices with same addresses to be connect to the same
loop.
The back page contains all the available address settings which are done using
the dipswitch.
The panel references the buttons with the name CALL POINTS.
| 
---|---
BSR-5036\A Addressable
manual call point
EN-54-11: 2001 + A1: 2005
KOLINDROS PIERIAS
60061 GREECE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>