olympia electronics BS-546 General Purpose Siren with Beacon Instruction Manual
- June 12, 2024
- olympia electronics
Table of Contents
olympia electronics BS-546 General Purpose Siren with Beacon Instruction
Manual
Thank you for purchasing this product of Olympia Electronics . A European manufacturer
GENERAL
The BS-546 is a general purpose siren with beacon and is used to give a loud sound and visual indication simultaneously.
The strong and bright signal that produce is covering several square meters.
It operates with 230VAC.
The power cable could be from 0,7mm² upto 1,5mm².
INSTALLATION
The device connection with the 220-240V AC is shown in figure 1 and discribed below.
First, unfasten the screw located at the bottom and remove the cover.
Now a bipolar terminal blog is shown on the PCB for the mains connection.
The installation of the device is achieved with the included mounting parts. Install it, indoors or outdoors protected from rain at a hight of 2- 3 meters from the floor.
The volume is regulated with a trimmer as shown in Figure 1.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
OPERATION VOLTAGE| 220 – 240V AC
CONSUMPTION| 6VA
AUDIO OUTPUT AT 1 METER| 100dB
BEACON| 3 LED AIGaAS
DEGREES OF COVER PROTECTION| ΙP 20
PRODUCED IN ACCORDANCE WITH| ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-3, ΕΝ 61000-3-2,
ΕΝ 60950-1
TEMPERATURE RANGE| 0 to 60o C
RELATIVE HUMIDITY| Up to 95%
CONSTRUCTION MATERIALS| ABS
DIMENSIONS| 205 x 90 x 57 mm
WEIGHT| 220 gr
GUARANTEE| 2 years
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>