Kreafunk wiCHARGE2 Qi Wireless Charger Instruction Manual

Kreafunk wiCHARGE2 Qi Wireless Charger

Product Information

• The Qi wireless charger is a stylish product made from 100% recycled plastic. It is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

• For more information, you can consult the declaration of conformity at https://Kreafunk.com/pages/declaration-of-conformity.
  

• The charger has a power output of 15W and uses a USB-C connection. It operates at a voltage of 5V/1A.

Product Usage Instructions

1. Before using the Qi wireless charger, please read the operation manual carefully.
2. Ensure that the product is not placed in a high temperature environment during charging to prevent overheating and damage.
3. Keep the charger in a dry place and avoid using it in wet or dirty conditions.
4. Do not throw the charger into a fire or drop it, as this may cause damage and malfunction.
5. When charging a mobile device, do not place anything between the device and the charging pad.
6. Avoid altering or disassembling the product. If you encounter any issues, contact your seller for assistance.
7. Avoid placing the charger near high voltage devices (maximum 5V) and magnetic stripe cards or chip cards to prevent magnetic failure.
8. Maintain a distance of at least 20 cm between the charger and any electronic devices or cards.
9. Use only 5V/1A power supplies with the charger. Connecting higher voltage supplies may cause serious damage.
10. Follow the safety and maintenance instructions provided in the operation manual.

• This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
• The declaration of conformity may be consulted at: https://Kreafunk.com/pages/declaration-of-conformity
• This stylish product is made from 100% recycled plastic.

Overview

Charging

Use

Technical specifications

• Dimensions: 100*11 mm (ØxH)
• Weight: 100g
• Charging cable included
• Standard: Qi
• Compatible with Qi enabled devices
• Charging   efficiency: ≥72%
• Charging distance: ≤8 mm
• Input power: DC 5V / 1A – 9V / 1.8A
• Output   power: 15 W

Safety and maintenance instructions

1. Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
3. Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
4. Place the product in a stable position to avoid fall and cause damage or personal injury.
5. Do not expose the product to direct sunlight for longer periods. High temperatures may shorten the life of the product, destroy the battery and distort certain plastic parts.
6. Do not expose the product to extreme cold as it may damage the internal circuit board.
7. Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles varies by use and settings.
8. Avoid liquids getting into the product.
9. Do not throw with or stamp on the product. This may damage the internal circuit board.
10. Do not try to disassemble the product. This must only be done by a professional.
11. Do not use concentrated chemical products or detergent to clean the product.
12. Keep the surface away from sharp things, as these may cause damage to the plastic parts.
13. Use 5V / 1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
14. Do not arbitrarily discard or place the lithium battery near fire or intense heat in order to avoid a risk of explosion.

If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem, the retailer will handle the claim directly with Kreafunk.

Precautions and taking care of wiCHARGE II

1. This product should be used and stored at a temperature between 20° to 40°, and humidity should be less than 85%.
2. Be sure not to place the product in high temperature environment during charging to avoid overheating and damage.
3. Keep this product in a dry place. Never place or use this product in wet or dirty conditions.
4. Never throw this product into a fire.
5. Never throw or drop this product as it may cause damage and malfunction.
6. Do not place anything between the mobile device being charged and the charging pad.
7. Never attempt to alter or disassemble this product. If there is a problem with the product, please contact your seller for further assistance.
8. Keep away from high voltage devices (highest 5V).
9. Do not place the product too close to magnetic stripe cards or chip card (credit card, ID card, etc.) to avoid magnetic failure.
10. Please keep the distance at least 20 cm between the product and implantable medical devices (pacemakers, implantable cochlear, etc.) to avoid potential interference with the medical device.
11. If you need to clean the charger, please make sure it is not connected to the AC adaptor.
12. Don’t place heavy objects on the product. This may damage the internal circuit board.
13. This product is not a toy. Please keep away from children.
14. Respective countries have their own laws on the minimum age allowed to operate chargers. Please check with your respective authority for further information.
15. All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer.

• Kreafunk ApS Klamsagervej 35A, st. 8230 Aabyhoej Denmark
• www.Kreafunk.cominfo@Kreafunk.dk +45 96 99 00 20

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>