sanag Z51S Pro TWS Bluetooth Headset User Guide

TRUE WIRELESS STEREO
sanag Z515 Pro TWS Bletooth Headset

User Guide

Product overview

Power on/off

Power on: Tum on the earphanes on both sides of the i of the charging box to automatically power on and enter the group paifng state , the blue and white ihts flash for 200ms, and then turn off after connection, an issue ‘Power on” or “Power on” (manual power on) and long press the MFB touch key for about 3 seconds, Shutdown: Put the earphone into the charging compartment under the cover and enter the charging state. The earphone will utomatically shut down snd discomnect, The blue and whitelight wil flash for 3 times and then o of.

Bluetooth pairing

1. 0pen the charging chamber, ake out the headset and start it automaticall; Please connect the Bluetooth headset with the mobile phone (or other comnecting devices)The distance is within SOCM, the closer the better
2. 0pen the Bluetooth interface of the mabile phone, search for * sanag 7515 Pro -, cick Pairng, and the blus and white ight wil flash for 200ms. After pairing is complete, the left ea liht will tu off, and the right ear biue and white light willflash quickly. After  connecting the mobile phone successfully, the liht wil tum off, and send “Pairing successfuf or “Successful

LED indication status

• Pairng status: bue and white lights fashing ahernately.
• Voice switch status: The blue and white light binks.
• Music status: No lght
• Headset charging state: the blue igh s bright,
• Headset charging completed: blue liht off,
• Charging state for charging bin: green light flashes single, ful green Tght s steady on,
• Charging bin for earphione charging: charging bin green light long bright, arphone fulllight off, box igh off
• Reset the headset: the blue and white light flashes quickly after the successful reset,

Function operation

• Power on: Turm on the earphones on both sides of the ld of the charging box to automaticaly power on and enter the group pairng state the blue and white ihts flash for 200ms, and then turn off after comnection, andissue Power or” or “Power on” (manual power on) and long press the MFB touch key for about 3 seconds.
• Shutdown: Put the earphone ito the charging compartment under the cover and enter the charging state. The earphone willautomatially shut down and disconnect, The bue and white light wil flash for 3 imes and then o of.
• Paiing status: blue and white fight lash for 200ms. After pairing s complete, the left ar light goes off, and the rght ear biue and white ght fashes quickly.
• After connecting the mobile phone successful, the light goes off, and Pairing successfu or Successful is emited.
• Answer/hang up a ca:cick the et and right MEB touch keys at randomdouble lick the leftand right M touch keys at random;
• Rejected cals: Long press the left and riht MFB touch keys for dbout 2 seconds:
• Plypause music any left or right MFB touch key;
• Up and dows Thvee sirkes L ear MFB touch key (ast song)/Three strkes R ear B touch key (next song)
• Volume «/- : Double-click the volume of the MFB touch button in L ear -/ dousle-cick the volume of the MFS touch button in R ear +; On the phoe, Long press the MES key in the left ear for about 1 second, and the volume. starts to decrease. Let go and stop.
• Long press the MFB key n the rght ear for about 1 second, and the volume starts to turn on To add, et go and stop
•  Voice switch; When the phone i not connected, the white and blue liht fashes, Double-click the MEB touch button on the left and rght side,
• Game Mode/music Mode: 4 Clcks Lt O Right Mfb Keys To Enter Low Latency Mode, 4 Clicks Again To Switch To Music Mode (Game Latency Down To 4oms)
• Voice assstant;Press and hold thefaft and right MFB touch keys for about 3 seconds to release and enter the voice assistant, and clck to exit

Specifications

• Mode: sanag 7515 Pro
• Bluetooth version: ¥ 53
• Battery capaciy of headset: 50mAn
• Battery capaciy of charging bo: 400mAh
• Bluetooth distance: > 10m
•  freauency range: BOHz-15€Hz

Matters needing attention

• Do ot use abrasive cleaners 1o clean this product,
• Do ot allow this product to be heated or close to a fire source, such 25 a cooking stove.
• Do ot expose the product to direct sunigh for 3 long time.
• Do ot discard this product i fire to avoid explosion.
• Do ot attempt to disassemble this product to make any modifications, 25 t does not contain any maintenance components,
• Do ot use this product in rain,
• if you do not plan o use this product for a long time, please store it na chy environment and Charge the headset less once to prolong its e and avoid extreme temperature and dust,

FCC Statement

s device complies with part 15 of the FCC Rules, Operation s subject to the following two conditons:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, induding interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority 1o operate the equipment,
Notes This equipment has been tested and found to comply with the. limits for a Class digital device, pursuant o part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmi interference in a residentia nstallation. This equipment generates uses and can radiate radio frequency energy and, if not nstalled an used in accordance with the instructions, may cause harmil interference to radio communications, However, there is no quarantee that interference wil not occur in 3 paticuar nstalation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user i encouraged to try to correct the inerference by one or more of the following measures:

• Reorient or relocate the receiving antenn,
• Increase the separation between the equipment and recever.
• Connect the equipment into an outlet on a circuit different from that
• which the receiver is connected.
• Consult the dealer or an experienced radio/ TV techncian for h e,

The devios has been evaluated to meet general RF expostr requiremert.
The devios can be used i poriabls exposure condon winoutrestncton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>