RKF BF3501P-BN Single Handle Swivel Spout Bathroom Sink Faucet Instruction Manual
- June 17, 2024
- RKF
Table of Contents
RKF BF3501P-BN Single Handle Swivel Spout Bathroom Sink Faucet
Instruction Manual
Installation Steps
Put the hot water supply hose into the hot inlet joint.
Put the cold water supply hose into the cold inlet joint.
Place the handle body through the hole.
Install faucet and faucet flange to deck surface.
From below deck, slide plastic washer and metalwasher onto threaded faucet
body.
Thread mounting nut onto faucet body.Secure mounting hardware to deck with
mounting screws
Connect hot supply hose (on left side) and cold water supply hose (on right side) to supply outlets
Installation completion effect.
Preparing for installation
CAUTION: Always shut off the water supply before removing or replacing any
part of a faucet. Open the
handle to relieve water pressure and ensure that the water is completely shut
off.
-
Remove the weight .
Remove the protective clip on outlet hose .
Unscrew the hose protector, screw nut, metal washer and rubber washer.
Check that the pre-assembled supply hoses and outlet hose are tightened securely. -
Check aerator ( pesent) regulaty for calcium buid up are when water steam is not.
-
DO NOT use caustic cleaning products as the use will break down finish and will lead toproduct changes.
-
Acceptable cleares include mixture of white vinegar and vater 50/50 or mildnon-abrasive liquid detengents. If the water pressue appears tobe less than optimum move, inspect,clean or replace the aerator.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>