Panasonic NI-22AWT Heavy Weight Dry Iron Instruction Manual

: June 12, 2024
: Panasonic

Table of Contents

Panasonic NI-22AWT Heavy Weight Dry Iron
HOW TO USE
SELECTION OF TEMPERATURE
MAINTENANCE
Parts
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Panasonic NI-22AWT Heavy Weight Dry Iron

Thank you for purchasing this Panasonic product. Before operating this Iron, please read these instructions completely. Please keep this Operating Instructions for future use.

IMPORTANT SAFETY PRECAUTIONS

This Iron is recommended for household use only.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not damage the supply cord or the plug.
Clean the plug regularly.
The Iron should always be turned to MIN before plugging or unplugging from outlet. Insert the plug firmly.
To avoid a risk of electric shock, do not put the Iron in water or any other liquid. Do not plug or unplug with wet hands.
Before plugging, make sure that the input voltage is the same as the rated voltage marked on the Iron.
The Iron must not be left unattended while it is connected to the supply mains. When leaving the room even for a short time, disconnect the plug and put it on upright position. Keep the Iron away from small children.
The Iron must be used and rested on a flat, stable surface.
When placing the Iron on its stand, ensure that the surface on which the stand is placed is stable.
The Iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
Do not operate the Iron with a damaged cord or the Iron has been damaged or the main socket is loose.
Stop using the product when any abnormality or failure occurs and disconnect the plug.
Never disassemble, repair or modify this Iron. For any repair work, request at an authorized Panasonic service shop.
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
Never pull the cord directly to disconnect from outlet; instead grasp the plug firmly and pull to disconnect.
Do not use the Iron with the supply cord in tangled condition. The supply cord might be damaged soon.
Let the Iron cool completely, before storing it. Loop cord loosely around the Iron and put it on upright position when storing.
To avoid burning, never touch the hot metal parts of the Iron.

HOW TO USE

Put the Iron on upright position.
Set the Temperature Select Control dial to the MIN position.
Connect the plug into the outlet.
Set the Temperature Select Control dial to the desired position which is suitable to the type of fabric. Wait for approximately 2 minutes until the Iron gets hot.

SELECTION OF TEMPERATURE

Sort the clothes according to the group of fabrics indicated on the Temperature Select Control.
Check the label attached to the clothes and follow the manufacturer’s instructions.
First, iron the clothes which require the lowest temperature. After that, iron those that require higher temperatures. This is because it takes more time for the lron to get cool than to get hot.
To avoid scorching or spoiling the cloth, pay attention to the fabric composition of the clothes.
In blended yarn fabrics, select the temperature suitable to the fabric resistant to the lowest temperature.
In case the fabric composition of the clothes is unknown, make trial ironing at a least conspicuous part of the clothes before regular ironing.
Try at lower temperature, and then gradually increase the temperature to find an ideal temperature for the material

CAUTION

Avoid ironing on something hard such as zipper, metallic button and such in order not to damage the surface of the Soleplate.
Do not use an abrasive material.

MAINTENANCE

After ironing, cool the Iron and then wipe it with a piece of soft cloth.
For any obstinate dirt, use a piece of soft cloth soaked with water, soap or neutral detergent.