Tascam Digital Converter Owner’s Manual

D01351500B
AE-4D
DIGITAL CONVERTER

OWNER’S MANUAL

• TASCAM is a registered trademark of TEAC Corporation.

• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

• Apple, Mac, Mac OS X, and Lightning are trademarks of Apple Inc.

• Android, Google Play and Google Maps are trademarks or registered trademarks of Google Inc

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

• Audinate®, the Audinate logo and Dante are trademarks of Audinate Pty Ltd.
  www.audinate.com/patents

• Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners.

TEAC CORPORATION
https://tascam.jp/jp/
Phone: +81-42-356-9143
1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan
TEAC AMERICA, INC.
https://tascam.com/us/
Phone: +1-323-726-0303
10410 Pioneer Blvd. Suite #1 and #4, Santa Fe Springs,
California 90670, U.S.A.
TEAC UK Ltd.
https://www.tascam.eu/en/
Phone: +44-1923-797205
Meridien House, 69-71 Clarendon Road, Watford, Herts, WD17 1DS, United Kingdom
TEAC EUROPE GmbH
https://www.tascam.eu/en/
Phone: +49-611-71580
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
TEAC SALES & TRADING(SHENZHEN) CO., LTD
Phone: +86-755-88311561~2
Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd., Futian District, Shenzhen 518040, China

IMPORTANT SAFETY INSTRUCTIONS

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For the U.S.A.
Declaration of Conformity
Model Number: AE-4D
Trade Name: TASCAM
Responsible party: TEAC AMERICA, INC.
Address: 10410 Pioneer Blvd. Suite #1 and #4, Santa Fe Springs, California 90670, U.S.A.
Telephone number: 1-323-726-0303
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user’s authority to operate this equipment.

For Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB-003 DU CANADA.
This product complies with the European Directives request and the other Commission Regulations.

CE Marking Information
EN55103-2
a) Applicable electromagnetic environment: E1, E2, E3, E4

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a  third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
    • The apparatus draws nominal non-operating power from the AC outlet with its POWER or STANDBY/ON switch not in the ON position.
    • The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
    • Caution should be taken when using earphones or headphones with the product because excessive sound pressure (volume) from earphones or headphones can cause hearing loss.
    • If you are experiencing problems with this product, contact TEAC for a service referral. Do not use the product until it has been repaired.

CAUTION

• Do not expose this apparatus to drips or splashes.
• Do not place any objects filled with liquids, such as vases, on the apparatus.
• Do not install this apparatus in a confined space such as a bookcase or similar unit.
• The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time.
• If the product uses batteries (including a battery pack or installed batteries), they should not be exposed to sunshine, fire or excessive heat.
• CAUTION for products that use replaceable lithium batteries: there is a danger of explosion if a battery is replaced with an incorrect type of battery. Replace only with the same or equivalent type.

For European Customers
Disposal of electrical and electronic equipment and batteries and/or accumulators
(a) All electrical/electronic equipment and waste batteries/ accumulators should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities.
(b) By disposing of electrical/electronic equipment and waste batteries/accumulators correctly, you will help save valuable resources and prevent any potential negative effects on human health and the environment.
(c) Improper disposal of waste electrical/electronic equipment and batteries/accumulators can have serious effects on the environment and human health because of the presence of hazardous substances in the equipment.
(d) The Waste Electrical and Electronic Equipment (WEEE) symbols, which show wheeled bins that have been crossed out, indicate that electrical/electronic equipment and batteries/accumulators must be collected and disposed of separately from household waste.
If a battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) as defined in the Battery Directive (2006/66/EC), then the chemical symbols for those elements will be indicated beneath the WEEE symbol. Pb, Hg, Cd
(e) Return and collection systems are available to end-users. For more detailed information about the disposal of old electrical/electronic equipment and waste batteries/ accumulators,  please contact your city office, waste disposal service, or the shop where you purchased the equipment.

CAUTION
• DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER-SERVICEABLE PARTS ARE INSIDE.
• IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
• USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

The nameplate is located on the bottom of the unit as shown below.
Front side

Introduction

Thank you very much for purchasing a TASCAM AE-4D Digital Converter. Before using this unit, read this Owner’s Manual carefully so that you will be able to use it correctly and enjoy working with it for many years. After you have finished reading this manual, please keep it in a safe place for future reference. You can also download this Owner’s Manual from the TEAC Global Site (http://teac-global.com/).

Features

• Supports 4 channels of digital AES/EBU (XLR) input and output at 44.1/48 kHz
• Supports 2 channels of digital AES/EBU (XLR) input and output at 88.2/96 kHz
• Internal sampling rate converter for inputs
• Dante interface included as standard feature
• AES67 (Dante AES67 mode) is also supported, so connection is possible with Ravenna and other network audio technologies compatible with AES67
• Supports daisy-chain connection in Dante switch mode
• Flexible routing is possible using Dante Controller
• Supports PoE (Power over Ethernet)
• 0 Supports power daisy-chaining
• 0 Support for sampling frequencies and bit lengths up to
• 96kHz and 24-bit
• LEDs for input signal and output signal
• Reference level can be set
• Dedicated remote control application for Windows, Mac, iOS, and Android (TASCAM DCP CONTROL)
• Half rack size

Included items

This product includes the following items. Take care when opening the package to avoid damaging the items. Keep the box and packing materials for transportation in the future. Please contact the store where you purchased this unit if any of these items are missing or have been damaged during transportation.

• Main unit …………………………………………………………………………..× 1
• Installation brackets ………………………………………………………..× 2
• Owner’s Manual (this document) including warranty ………………………………………………………….× 1

Conventions Used in this manual

In this manual, we use the following conventions:

• When we refer to buttons, connectors and other parts of this unit and other equipment, we use a bold font like this: STATUS indicator.
• As necessary, additional information is provided under TIP, NOTE and CAUTION headings.

TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special cases.
ATTENTION
Failure to follow these instructions could result in damage to equipment or lost data, for example.
CAUTION
Failure to follow these instructions could result in injury.

Precautions for placement and use

• The operating temperature range of this unit is 0–40 °C.

•  Do not install this unit in the following types of locations. Doing so could make the sound quality worse or cause malfunction.
  Places with significant vibrations
  Next to a window or in another location exposed to direct sunlight
  Near heaters or other extremely hot places Extremely cold places
  Very humid or poorly ventilated places Very dusty places

• To enable good heat dissipation, do not place anything on top of the unit.

• Do not place this unit on top of a power amplifier or other device that generates heat.

• When installing this unit on or under a desk, use the included attachment brackets.

• To mount this unit in a rack, use a TASCAM AKRS1 (sold separately).

Beware of condensation

Condensation could occur if the unit is moved from a cold place to a warm place, it is used immediately after a cold room has been heated or it is otherwise exposed to a sudden temperature change. To prevent this, or if this occurs, let the unit sit for one or two hours at the new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe with chemical cleaning cloths, thinner, alcohol or other chemical agents. Doing so could damage the surface or cause discoloration.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global Site: <http ://teac-global.com/>
In the TASCAM Downloads section, select the desired language to open the Downloads website page for that language.

Product registration

Customers in the USA, please visit the following TASCAM website to register your TASCAM product online. https://tascam.com/us/
About TASCAM customer support service
TASCAM products are supported and warrantied only in their country/region of purchase.
To receive support after purchase, on the TASCAM Distributors list page of the TEAC Global Site (http://teac-global.com/), search for the local company or representative for the region where you purchased the product and contact that organization. When making inquiries, the address (URL) of the shop or webshop where it was purchased and the purchase date is required. Moreover, the warranty card and proof of purchase might also, be necessary

Names of parts

Front panel

1 STATUS indicator
The STATUS indicator blinks blue under the following conditions.
o When no LAN cable is connected
o When the Dante module is not operating properly

2 SAMPLE RATE indicator
The lit/unlit state of the three SAMPLE RATE indicators (44.1k, 48k and ×2) show the sampling frequency status of the unit.

| 44.1 kHz| 48 kHz| x2
---|---|---|---
44.1 kHz| Lit| Unlit| Unlit
48 kHz| Unlit| Lit| Unlit
88.2 kHz| Lit| Unlit| Lit
96 kHz| Unlit| Lit| Lit

3 IN SIG indicators
These light when sound is being inputted through the digital inputs. Input is judged to have occurred when the signal level exceeds −60 dBFS.
4 OUT SIG indicators
This light when sound is being output through the digital outputs. Output is judged to have occurred when the signal level exceeds −60 dBFS.

Rear panel

5 AES/EBU IN connectors
These are balanced XLR AES3-2003/IEC60958-4 (AES/EBU) format digital audio input connectors.
NOTE
When the sampling frequency is 88.2 or 96 kHz, use the AES/EBU IN 1-2 connector. The AES/EBU IN 3-4 connector cannot be used.
6 AES/EBU OUT connectors
These are balanced XLR AES3-2003/IEC60958-4 (AES/ EBU) format digital audio output connectors.
NOTE
When the sampling frequency is 88.2 or 96 kHz, use the AES/EBU OUT 1-2 connector. The AES/EBU OUT 3-4 connector cannot be used.

7 DC IN/DC OUT connectors
The DC-IN connector is above, and the DC-OUT connector is below. (Left is 12V, and right is GND.) These connectors are specifically for power daisy-chaining.
ATTENTION
Disconnect the AC adapter before connecting the DC IN and DC OUT connectors.
NOTE
Power daisy-chaining can be enabled by connecting the DC OUT and DC IN connectors. Power daisy-chaining of up to two units is possible
When powered by PoE, the first unit in the power daisy-chain will not be powered. In this case, use a dedicated PS-P1220E AC adapter (sold separately) to power the first unit in the daisy chain.
8 DATA/DATA+PoE connectors
These are Dante transmission connectors.
Use to connect the unit to a Dante network.
Use the DATA+PoE connector when connecting to a switching hub that supports the PoE power supply. In this case, use of an AC adapter is not necessary. Either connector can be used when using a switching hub that does not support PoE power supply.
9 RESET button
This resets the settings.
Press and hold for 5 seconds to reset all Dante settings.
Press and hold for 10 seconds to reset all unit settings.

10 Gigabit link status indicator
Orange indicates that a gigabit Ethernet link has been established.
11 Link status/activity indicator
Green indicates that a link is established between the devices. Blinking indicates that signals are being transmitted between the devices.
12 DC IN 12V connector
Connect a PS-P1220E AC adapter (sold separately) here.
13 Cord holder
When using a PS-P1220E AC adapter (sold separately), hook its cord here to prevent accidental disconnection.

Installing the attachment brackets

By installing the included attachment brackets on this unit, you can fix it in place on top of or underneath a desk, for example.

1. Remove the four screws installed in the left and right sides of the enclosure.

2. Align the included attachment brackets with the enclosure.

NOTE
When installing this unit on a desk, align the brackets as shown in the illustration below.

3. Use the four removed screws to install the attachment brackets on the unit.

Installing on or under a desk

To install this unit on or under a desk, use 4 commercially available screws that are suitable for the material and thickness of the desk.
NOTE
The width of the attachment bracket openings is 7.1 mm.
See the dimensional diagrams at the end of this manual for details about the attachment brackets.
1. With the two attachment brackets already installed on the unit, align the unit with the desk as desired.
2. Make marks where the screw holes will be made in the desk.
3. Drill pilot holes for the screws in the desk.
4. Attach the unit to the desk with 4 screws.

DSP overview

This unit has a built-in DSP.
All of the following settings can be made using the dedicated remote control application (TASCAM DCP CONTROL).
See the back of this manual for DSP block diagrams.
Input channels
Input channel fader
Use to adjust the input channel signals.
Input mute
Mute the input channel signal.
Output channels
Output channel fader
Use to adjust the level sent to the output jack.
Output mute
Mute the output channel signal.

Application overview

Using the TASCAM DCP CONNECT remote control application, you can operate the unit from a distance.
For details about the application, please see its Owner’s Manual. You can download the application Owner’s Manual from the TEAC Global Site (<http ://teac-global.com/>).

INPUT screen

Notes about Dante

Dante is a transmission protocol developed by Audinate.
Using networks based on gigabit Ethernet standards, it enables multichannel (512 IN/512 OUT)
transmission and high precision, for example. Check the Audinate website for details about Dante. https://www.audinate.com/

Connecting to a Dante network

In order to set up and use this card, you must also set up the Ethernet network that it is connected to, a computer that runs Dante Controller and other devices that support Dante.
Requirements for LAN cables used for connections with the connectors on this unit
Use STP cables that are at least category 5e.
Both crossover and straight cables can be used.
ATTENTION
This unit is not compatible with 100Mbps Ethernet switching hubs. Always use switching hubs that support Layer 2 and Gigabit Ethernet.
NOTE

• Set the computer to set the IP address automatically.
• Restarting the computer might be necessary if a previous network setting is still active on the computer.

Switched (daisy chain) connection
Dante devices can be daisy-chained when there are few connected devices and when not using a switching hub. Connect them as shown below.
Switched (daisy chain) connection example

NOTE

• When using a switched (daisy chain) connection, either DATA or DATA+PoE connectors can be used.
• If the number of connected devices increases, raising the latency setting will be necessary.

Using Dante Controller

Dante Controller overview
This unit uses the Dante Controller application, which is available at the Audinate website, to connect with other devices that support Dante.
Download the latest version of the Dante Controller application and an operation manual from the Audinate website. Audinate download page https://www.audinate.com/products/software/dante-controller
Make at least the following settings using a computer that has Dante Controller installed.
Adjust the sampling frequency and bit depth of each Dante device.
Set the audio routing.
NOTE
Settings made using Dante Controller are stored in the built-in memory of each Dante device. Unless settings are modified, connections will not change even if Dante Controller is quit or the computer is disconnected from the Dante network.

Audio routing settings
When Dante Controller is launched, the Network View screen shown below will open. On this screen, you can set and monitor conditions related to the Dante network.

1 Receiving device name
This is the name of a receiving device on the Dante network.
2 Receiving device channels
These are the names of the channels of the receiving device on the Dante network.
3 Transmitting device name
This is the name of a transmitting device on the Dante network.
4 Transmitting device channels
These are the names of the channels of the transmitting device on the Dante network.
5 Audio routing
Route the audio channels of the transmitting and receiving devices that you want to connect here. Left-click the intersection of the channels you want to connect on the matrix to connect them.

NOTE
While pressing the computer keyboard Ctrl key, left-click the “-” at the intersection of device names to connect all connectable channels at once.

Changing sampling frequencies and bit depths with Dante Controller
Double-click a device name on the Network View screen to open the Device View screen.
On this screen, you can set and monitor conditions related to devices on the Dante network.
Click the Device Config tab to open the page where you can change the sampling frequency, bit rate and other settings of the device selected in 1 shown in the illustration below.

1 Identify Device
If the unit is selected by device name (1), clicking this icon will cause all 3 SAMPLE RATE indicators to start blinking.
Clicking it again will return them to their ordinary status.
This allows the quick identification of the device being operated when multiple units are being used at the same time, for example.
2 Device name
This is the name of the device that can have its settings changed in the current Device View.
3 Change device name
Edit the device name.
4 Sampling frequency
Set the sampling frequency.
5 Bit depth
Set the bit depth.
6 Latency setting
Set the latency.
Use the following guidelines to change the latency setting.

device passes through 10 gigabit switching hub.
2 msec| The transmission speed of the transmitting device is 100 Mbps.
5 msec| Use this maximum selectable la-tency value when creating a large-scale network.

ATTENTION

• Changing the name of a device will clear audio routing settings. For this reason, we recommend changing device names to names that are easy to identify before setting audio routings.
• Depending on network connection conditions, setting the latency to a value higher than the guideline might be necessary.

NOTE
When using a switched (daisy chain) connection, which does not use a switching hub, set the latency according to the number of Dante devices that signals passthrough as shown  below.

Switched (daisy chain) connection example

Specifications

General
Formats and channels
44.1/48 kHz,16/24-bit, 4 channels
88.2/96 kHz,16/24-bit, 2 channels (double speed)
Input/output ratings
DATA/DATA+PoE connectors
Connector: RJ-45
Transmission protocol: Dante
Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
Cables: category 5e or faster STP cables
DIGITAL INPUT (AES/EBU) connectors
Connector: XLR-3-31
Input impedance: 110 Ω
Format: AES3-2003/IEC60958-4 (AES/EBU)
Supported sampling frequencies: 32 kHz – 192 kHz
(Sampling rate converter is always on)
DIGITAL OUTPUT (AES/EBU) connectors
Connector: XLR-3-32
Input impedance: 110 Ω
Format: AES3-2003/IEC60958-4 (AES/EBU)
Supported sampling frequencies: 44.1, 48, 88.2 and 96 kHz

Other
Power
PoE class 0
TASCAM PS-P1220E AC adapter (sold separately)
Power consumption
3W
Dimensions
214 × 44.45 × 136.1 mm (W x H x D, including protrusions)
Weight
795 g
Operating temperature range
0°C–40°C

• See the back of this manual for dimensional drawings and DSP block diagrams.
• Illustrations in this manual might differ in part from the actual product.
• Specifications and external appearance might be changed without notification to improve the product.

Dimensional drawings

Main unit

Main unit with brackets installed

DSP Block diagram

Important Notice Regarding Software
To request the source codes, please access the following URL and fill in the registration form. http://teac-global.com/support/opensource/form/
Please note that we are unable to answer any inquiries or questions about the contents of the source codes.

Software Licensing

Precision Time Protocol daemon (v1b2) http://sourceforge.net/projects/ptpd/files/
Copyright (c) 2009-2012 George V. Neville-Neil, Steven Kreuzer, Martin Burnicki, Jan Breuer, Gael Mace, Alexandre Van Kempen
Copyright (c) 2005-2008 Kendall Correll, Aidan Williams All Rights Reserved
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHORS “AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

mdnsd – embeddable Multicast DNS Daemon
https://github.com/cooljeanius/mdnsd
The mind source code is licensed by the BSD License – text provided below.
Copyright (c) 2007, Jer –jer@jabber.org All rights reserved.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,  BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  INTERRUPTION)  HOWEVER CAUSED AND ON ANY THE-ORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  DAMAGE.
lwIP (v2.0.3)
http://savannah.nongnu.org/projects/lwip/
lwIP is licenced under the BSD licence:
Copyright (c) 2001-2004 Swedish Institute of Computer Science.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR `AS IS’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. FreeRTOS (v6.0.4)

tropicssl (v6a6997f)
http://gitorious.org/tropicssl/
Copyright (c) 2009, StackFoundry LLC < support@stackfoundry.com >. Based on XySSL: Copyright (c) 2006-2008, Christophe Devine. Based on PolarSSL: Copyright (c) 2009, Paul  Bakker All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions, and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,  UT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  MERCHANTABILITY AND FITNESS FOR A  PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

WARRANTY

WHO IS COVERED UNDER THE WARRANTY
This warranty may be enforced only by the original purchaser. This warranty is not valid if the product was purchased through an unauthorized dealer.
LENGTH OF WARRANTY
All parts except heads and disk drives are warranted for one (1) year from the date of original purchase. Heads and disk drives are warranted to ninety (90) days from date of original purchase. Labor is warranted for ninety (90) days from the date of original purchase.
WHAT WE WILL PAY FOR
We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.
HOW YOU CAN GET WARRANTY SERVICE
Your unit must be serviced by an authorized TASCAM service station in the United States. (This warranty is not enforceable outside the U.S.) If you are unable to locate an authorized  TASCAM service station in your area, please contact us. We either will refer you to an authorized service station or instruct you to return the unit to the factory. Whenever warranty service is required, you must present a copy of the original dated sales receipt from an Authorized TASCAM Dealer.
You must pay any shipping charges if it is necessary to ship the product to the service. However, if the necessary repairs are covered by the warranty, we will pay return surface shipping charges to any destination within the United States.

LIMITATION OF IMPLIED WARRANTIES
Any implied warranties, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, are limited in duration to the length of this warranty.

EXCLUSION OF DAMAGES
TEAC’s liability for any defective product is limited to repair or replacement of the product, at TEAC’s option.
TEAC shall not be liable for:
1. Damages based upon inconvenience, loss of use of the product, loss of time interrupted operation or commercial loss; or
2. Any other damages, whether incidental, consequential or otherwise.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. To locate an Authorized Service Center in Your Area
CALL 1-800-447-8322
< Europe >
This product is subject to the legal warranty regulations of the country of purchase. In case of a defect or a problem, please contact the dealer where you bought the product.

< In other countries/areas >
This warranty gives you specific legal rights, and you may also have other rights that vary by country, state or province.
If you have a warranty claim or request, please contact the dealer where you bought the product.

If you require repair services for your TASCAM equipment, please contact the dealer where the product was purchased from or the TASCAM Distributor in your country. A list of  TASCAM Distributors can be found on our website at: <http ://teac-global.com/>

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>