JBLCLIP5PUR Clip 5 Bluetooth Speaker User Guide
- June 1, 2024
- JBL
Table of Contents
JBLCLIP5PUR Clip 5 Bluetooth Speaker
FAQ
- Q: How do I connect multiple speakers?
- A: To connect multiple speakers, ensure all speakers are turned on and in Bluetooth pairing mode. Use the JBL PORTABLE app for speaker configuration and follow the in-app instructions for multi-speaker connection.
- Q: What is the music playtime of the JBL Clip 5?
- A: The music playtime of the JBL Clip 5 is up to 12 hours, but this may vary based on the volume level and audio content being played.
Product Usage Instructions
Bluetooth Pairing
- Turn on the JBL Clip 5 by pressing the power button.
- Access the Bluetooth settings on your device.
- Select “JBL Clip 5” from the list of available devices to pair.
- Once paired, the JBL Clip 5 will show as connected.
Charging
To charge the device:
- Connect the provided charging cable to the JBL Clip 5.
- Plug the other end of the cable into a power source with an output of 5V/1A.
- The LED indicator will show a low battery when charging is needed.
- A full charge takes approximately 3 hours.
Carabiner
- The JBL Clip 5 features a carabiner for easy attachment to bags or belts, providing portability and convenience.
Waterproof and Dustproof
The JBL Clip 5 has an IP67 rating, making it waterproof and dustproof for outdoor use without worry.
Factory Reset
To perform a factory reset:
- Press and hold the power button for more than 2 seconds.
- The device will reset to its default settings.
WHAT’S IN THE BOX
BLUETOOTH PAIRING AND PLAY
BLUETOOTH PAIRING
PLAY
MULTI-SPEAKER CONNECTION AND APP
MULTI-SPEAKER CONNECTION
APP
- Use the JBL PORTABLE app for speaker configuration and software upgrade.
CHARGING AND CARABINER
CHARGING
CARABINER
WATERPROOF
WATERPROOF DUSTPROOF IP67
FACTORY RESET
TECH SPEC
- Transducer: 45 mm / 1.75″
- Output power: 7 W RMS
- Frequency response: 95 Hz – 20 kHz
- Signal-to-noise ratio: > 85 dB
- Battery type: Lithium-ion polymer 5.32 Wh
- (equivalent to 3.8 V / 1400 mAh)
- Battery charge time: 3 hours (5 V / 1 A)
- Music playtime: up to 12 hours
- (varies by volume level and audio content)
- Bluetooth® version: 5.3
- Bluetooth® profile: A2DP V1.4, AVRCP V1.6
- Bluetooth® transmitter frequency range: 2400 – 2483.5 MHz
- Bluetooth® transmitter power: ≤ 10 dBm (EIRP)
- Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
- Product dimensions (W x H x D): 86.30 x 134.50 x 46.0 mm / 3.4″ x 5.3″ x 1.8″
- Net weight: 0.285 kg / 0.628 lbs
- Packaging dimensions (W x H x D): 100.5 x 148 x 59 mm / 3.9″ x 5.8″ x 2.3″
- Gross weight: 0.39 kg / 0.86 lbs
- Maximum operation temperature: 45 °C
WARNING
- To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
- Do not expose the JBL Clip 5 to liquids without removing cable connection. Do not expose JBL Clip 5 to water while charging.
- It may result in permanent damage to the speaker or power source.
- Chemicals, salt or “foreign particles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean.
- Charging when wet might damage your speaker.
- When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.
Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>