ARGOX XM4-200 Industrial Barcode Printer Installation Guide
- June 12, 2024
- ARGOX
Table of Contents
ARGOX XM4-200 Industrial Barcode Printer
Product Information
| Product Name | XM4-200/300 MX-200 Series Cutter |
|---|---|
| Revision Date | Jun. 2023 |
| Note | Except for the new full cutter, all the other cutters DO NOT |
cut on media with glue. For more details, please refer to the
cutter specification in the user’s manual.
Specifications| Subject to change without notice
Version| v1.0
Manufacturer| Argox Information Co., Ltd.
Product Usage Instructions
To install the cutter, follow the quick installation guide below:
- Start by gathering the necessary components for installation.
- Attach two hole cutters to the designated holes on the cutter cable.
- Connect the cutter cable to the cutter connector on the product.
- Attach two more hole cutters to the remaining holes on the cutter cable.
- Insert the ground wire into the designated hole on the product.
- Repeat steps 2-5 for a total of five hole cutters and two ground wires.
- Ensure all connections are secure and properly aligned.
- Refer to the cutter specification in the user’s manual for further details on media compatibility.
INSTALLATION
Note:
- Except for the new full cutter, all the other cutters
- DO NOT cut on media with glue. For more details, please refer to the cutter specification in the user’s manual.
- Specifications, accessories, parts and programs are subject to change without notice.
Argox Information Co., Ltd. 8F., No. 28, Baogao Rd., Xindian Dist., New Taipei City 231029, Taiwan (R.O.C.)
- Tel: +886-2-8912-1121
- Fax: +886-2-8912-1124
- https://www.argox.com
- https://www.youtube.com/user/argoxmkt
Copyright © 2023. Argox Information Co., Ltd. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>