R-GO TOOLS RGORIATBL Riser Attachable Laptop Stand User Manual

R-GO TOOLS RGORIATBL Riser Attachable Laptop Stand User Manual

Product overview

01 R-Go Riser Attachable
02 3M Dual Lock sticker 4x
03 Foam sticker square 4x
04 Foam sticker round 1x
05 Foam sticker oval 2x
06 Rubber antislip cap 4x

Setup

Step A
Place the rubber antislip caps on the corners of the logo side of the laptop stand.

Step B
Turn the stand, and place the 3M Dual Lock stickers and rectangular foam stickers on the indicated places on the stand.

Step C
Peel off the protection layer of the 3M Dual Lock stickers.

Optional If your laptop has large anti-slip pads sticking out, you can add extra square foam stickers to fill up the excesive space. Place the foam stickers on top of the 3M Dual Lock stickers. Caution : place the foam stickers on the 3M Dual Lock stickers in such a way that the peel-off layer is on the top side, see below*.

Step D
Place the laptop stand on the bottom side of your laptop.

Step E
Place the blue round foam sticker in the hole of the laptop stand with protection layer removed. Press down the laptop stand, making sure that the sticker stays properly on the bottom of the laptop. You can open the laptop stand again. It is now ready for use!

Final product

For more information about this product, scan the QR code!
https://r-go.tools/riatt_web_en

References

• R-Go Riser Attachable Laptop-Ständer - R-Go Tools
• R-Go Riser Attachable Laptop stand - R-Go Tools
• R-Go Riser Attachable Support pour Ordinateur Portable - R-Go Tools
• R-Go Riser Attachable Laptopstandaard - R-Go Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>