My SpinWave Robot Edge Brushes are Not Turning | Support
- June 7, 2024
- Bissell
Table of Contents
After being used for several cleanings, the Edge Cleaning Brushes need to
be cleaned to work more effectively
-
Is your machine beeping or giving an error message?
- Yes > Is it beeping twice and flashing red?
- Yes > Continue Troubleshooting
- No > Go to SpinWave Light Indications & Errors
- No > Turn Power Switch Off
-
Use a Phillips-head screwdriver to remove the screw securing each edge brush
-
Pull up on edge brush to remove
- Clean the brushes of any debris
- Check for any obstructions such as hair or string where brushes attach
-
If edge brushes become crooked, they may be soaked in hot water to return them to their original shape
- Allow to air dry completely before reinstalling, secure each with screw
-
For replacement Edge Brushes > Go to Parts & Supplies
-
If the edge brushes continue to not turn, please Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>