ARGOX iX6 Industrial Barcode Printer Installation Guide
- May 15, 2024
- ARGOX
Table of Contents
ARGOX iX6 Industrial Barcode Printer
Product Information
Specifications
- Model: iX4/iX6 DX-4/DX-6 Series
- Revision Date: Dec. 2023
- Version: v1.1
- Peeler Quick Installation Guide
Product Usage Instructions
Installation Steps
- Start by locating the sponge hole on the iX6/DX-6 Series.
- Insert the peeler cable through the 1mm hole on the iX6/DX-6 Series.
- Repeat steps 1 and 2 for the iX4/DX-4 Series.
- Connect the peeler cable to the peeler connector.
- Continue by following steps 5 to 13 for the installation process.
- Complete the installation by repeating steps 14 to 19 as necessary.
- Ensure all connections are secure before proceeding to use the product.
Product Usage
Once the installation is complete, power on the device and follow the
regular operation procedures as outlined in the user manual.
Maintenance
Regularly check the connections and cleanliness of the peeler components to
ensure smooth operation.
FAQ
-
Q: Can I use the peeler with other series?
A: The peeler cable and connector provided are designed specifically for use with the iX4/iX6 DX-4/DX-6 Series. Using them with other series may result in compatibility issues. -
Q: How often should I clean the peeler components?
A: It is recommended to clean the peeler components regularly, especially if there is a buildup of debris or adhesive residue that may affect its performance.
Installation Instructions
Revision Date : Dec. 2023
Note
*Specifications, accessories, parts and programs are subject to change
without notice
Argox Information Co., Ltd.
8F., No. 28, Baogao Rd., Xindian Dist.,
New Taipei City 231029, Taiwan (R.O.C.)
Tel : +886-2-8912-1121 Fax: +886-2-8912-1124
https://www.argox.com
https://www.youtube.com/user/argoxmkt
Copyright 0 2023. Argox Information Co., Ltd. All Rights Reserved.