sonnen 9.53 Hybrid Battery Inverter Instructions
- June 7, 2024
- sonnen
Table of Contents
sonnen 9.53 Hybrid Battery Inverter
Product Information
Specifications:
- Model: sonnenBatterie hybrid 9.53
- Additional Component: sonnenProtect 2500
- Training Type: Installer Training
- Course Duration: Up to 90 minutes
- Delivery Mode: Online with assessments
- Prerequisites: Clean Energy Council Grid-Connect and battery storage accreditation
Product Usage Instructions
Course Overview:
The course provides skills and technical knowledge for designing,
installing, and commissioning sonnenBatterie hybrid 9.53 and sonnenProtect
2500. It covers product technical specifications, operational concepts, and
installation guidelines.
Prerequisites:
Learners must have existing knowledge of grid-connected PV systems and
battery energy storage systems. They should hold a Clean Energy Council Grid-
Connect and battery storage accreditation.
Installation Requirements:
- All sonnen systems must be installed by authorized electricians with unrestricted electrical licenses.
- Electricians must have technical knowledge and experience to ensure safety during installation.
Course Delivery:
The course is free of charge and delivered online with short assessments at
the end of each topic. Learners can complete it at their own pace within
approximately 90 minutes.
Certification:
Successful completion grants learners authorization to install and
commission the sonnenBatterie hybrid 9.53 system and sonnenProtect 2500, along
with a certificate of completion.
FAQ:
-
Q: Can I take the course without the mentioned prerequisites?
A: No, learners are required to have existing knowledge of grid-connected PV systems and hold the necessary accreditations to enroll in the course. -
Q: Is the training only available online?
A: Yes, the training is conducted online with short assessments at the end of each topic. -
Q: How long is the course?
A: The course will take up to 90 minutes to complete, but learners can progress at their own pace. -
Q: Who should install sonnen systems?
A: Authorized electricians with unrestricted electrical licenses should install sonnen systems to ensure safety and compliance.
About the course
- This course provides the skills and technical knowledge required to design, install and commission sonnenBatterie Hybrid 9.53 and sonnenProtect 2500. The training includes product technical specifications, operational concept, and instructions to install and commission the storage system according to both guidelines and the Australian standards and regulatory requirements.
- Upon successful completion of this module, learners will be authorized to install and commission the sonnenBatterie hybrid 9.53 system and sonnenProtect 2500. Learners will receive a certificate of completion stating their unique sonnen installer accreditation number
Prerequisites
- It is assumed that the learners have existing knowledge of grid-connected PV systems and battery energy storage systems. It is assumed that they hold a Clean Energy Council Grid-Connect and battery storage accreditation.
- All sonnen systems must be installed by authorised electricians who hold unrestricted electrical licenses.
- The electrician must be a person with technical knowledge or sufficient experience to enable him/ her to avoid dangers that electricity may create.
Delivery Mode:
This is an online course with short online assessments at the end of each
topic.
Duration:
- This course will take up to 90 minutes to complete.
- This is a self-paced course, so the duration may vary.
Course outline
- Overview of sonnenBatterie hybrid 9.53
- System Components
- Operation Concept
- Scope of Delivery, Mounting and Installation
- Commissioning
- sonnenProtect 2500
Resources and equipment:
- A computer/ laptop/ smart device with a stable Internet connection.
- Installation and Operations manuals of sonnenBatterie hybrid 9.53
- Datasheet of sonnenBatterie hybrid 9.53
- The following Australian Standards:
- AS/NZS 5139: 2019
- AS/NZS 5033: 2021
- AS/NZS 4777.2: 2020
- AS/NZS 3000: 2018
Cost:
This course is free of charge.
Want to know more?
Email our Technical Training Manager at
training@sonnen.com.au sonnenBatterie hybrid
9.53 Installer Training.
Click here to complete the form and to submit your interest
sonnen Australia Pty Ltd · Lionsgate Business Park · Tenancy 6 · 180 Philip
Hwy · Elizabeth South SA 5112 · T 137 666 · ABN 87 611 337 547
Version 1 | 2024
sonnen.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>