westfalia 781229 Heavy Duty Soldering Iron 300 W Instruction Manual

: June 12, 2024
: Westfalia

Table of Contents

westfalia 781229 Heavy Duty Soldering Iron 300 W
Product Information
Product Usage Instructions
SAFTY NOTES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

westfalia 781229 Heavy Duty Soldering Iron 300 W

Product Information

Product Name: Art. 78 12 29
Product Type: Soldering Iron
Model Number: Art. 78 12 29
Power Supply: 230 V~ 50 Hz
Power Consumption: 300 Watt
Dimensions: 380 x 42 x 57 mm

Product Usage Instructions

Make sure that the mains voltage corresponds to the operating voltage specified on the rating plate.
Ensure that the soldering tip is in a fixed position and the screw is tightened.
Before using the soldering iron, read the instruction manual carefully and keep it for future reference.
Dispose of unnecessary packaging material or store it in a place that is inaccessible to children to avoid suffocation risks.
Never allow persons with limited physical, sensory, or mental abilities to use the device unless they are supervised and instructed by a supervisor.
Keep the soldering iron out of the reach of children as it is not a toy.
Ensure that the mains voltage matches the operating voltage specified on the rating plate to avoid malfunctions, damage, and health impairments.
CAUTION! The tool reaches a high temperature! Do not touch hot tips or hot metal parts during use to avoid burns.
Always place the soldering iron on its original stand between soldering processes and when not in use to avoid the risk of fire.
Always wear suitable protective clothing and protect your eyes when using the soldering iron.
Ensure adequate ventilation when soldering to prevent any danger from solder and flux fumes.
Do not immerse the soldering iron in water or other liquids to avoid electric shock hazards.
Use the soldering iron on a heat-resistant and tidy table to prevent any damage or accidents.
Allow the soldering iron to cool down before storing it after use.
Do not carry the soldering iron by the power cable and do not use it for purposes for which it is not intended.
Protect the cable from heat and sharp edges, and do not use it to pull the plug out of the socket.
If the device is damaged, stop using it and have it repaired by a specialist or contact customer service. Do not attempt to disassemble or repair the device yourself.

HINTS:

SAFTY NOTES

To avoid malfunctions, damage and health impairments, please observe the following information:

Please read these operating instructions carefully and only use the device in accordance with these instructions.
Dispose of unnecessary packaging material or store it in a place that is inaccessible to children. There is a risk of suffocation!
Persons with limited physical, sensory or mental abilities may not use the device unless they are supervised and instructed by a supervisor.
The device is not a toy. Keep out of the reach of children.
Make sure that the mains voltage matches the operating voltage specified on the rating plate.
CAUTION! The tool reaches a high temperature! Can cause burns.
Do not touch hot tips or hot metal parts during use.
ATTENTION! This tool must be on its stand when not in use.
Keep out of the reach of children. This is not a toy and is not intended for use by children.
Misuse can result in burns, electric shock, and injury.
Do not immerse the tool in water or other liquids! Electric shock hazard!
Always use the tool on a heat-resistant and tidy table.
After use, allow the tool to cool before storing.
Always place the soldering iron on its original stand between soldering processes and when not in use to avoid the risk of fire.
Always wear suitable protective clothing and protect your eyes.
Solder and flux fumes can be dangerous, always ensure adequate ventilation when soldering.
Do not carry the soldering iron by the power cable and do not use it for purposes for which it is not intended.
Protect the cable from heat and sharp edges. Do not use the cord to pull the plug out of the socket.
If the device is damaged, stop using the device and have it repaired by a specialist or contact our customer service. Do not disassemble the device or attempt to repair it yourself.

Instructions for use

Make sure that the mains voltage corresponds to the operating voltage specified on the rating plate.
Make sure the soldering tip is in a fixed position and the screw is tightened.
Connect the soldering iron to the mains and place it on the original stand supplied.
Turn on the soldering iron by setting the switch to the “I” position.
Wait for the soldering iron to heat up to its working temperature.
The surfaces of the connection points must be clean. Use an appropriate flux.
“Tin” the tip by coating the heated tip with solder.
Heat the connection points, not the solder.
Apply enough solder to the heated parts.
Allow the solder joint to cool down undisturbed.
Turn off the soldering iron by setting the switch to the “0” position.
Unplug the soldering iron and let the iron cool down on the stand.

Cleaning

Clean the soldering iron with a slightly damp cloth. If necessary, use some washing-up liquid as well. Do not immerse the soldering iron in liquids.
Do not use harsh chemicals or abrasives to avoid damaging the surfaces.

Technical data Connection voltage:

Rated output: 230 V~ 50 Hz
Soldering tip Ø: 300 watts
Tip temperature max.: 19 mm, copper, curved approx. 520 ℃ ± 30 ℃
Weight: 0,76 kg
Item dimensions (L x W x H): 380 x 42 x 57 mm

CUSTOMER SERVICES

DEUTSCHLAND
D-58093 Hagen
Telefon : (0180) 5 30 31 32 Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de

Telefon : (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch
Telefon: (07723) 4 27 59 54

Telefax: (07723) 4 27 59 23

Internet: www.westfalia-versand.at

DISPOSAL
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.