SAMSUNG RF32CG5100 32 cu. ft. 3 Door French Door Refrigerator Instruction Manual
- June 12, 2024
- Samsung
Table of Contents
SAMSUNG RF32CG5100 32 cu. ft. 3 Door French Door Refrigerator
Product Information
The 32 cu. ft. 3-Door French Door Refrigerator (Model RF32CG5100) is a standard-depth refrigerator that measures 35 3/4 inches in width, 29 1/2 inches in depth without the door, and 44 inches with the drawer open. With the door handle, the depth measures 36 1/4 inches. The height without the hinge is 68 7/8 inches, and with the hinge, it is 70 inches. The refrigerator is designed to fit a 36-inch opening and has a depth that allows the door to open 90 degrees without the handle contacting the wall.
Standard-depth refrigerators typically measure between 30 to 35 inches in depth, making them slightly deeper than counter-depth refrigerators that sit flush with cabinetry. It is important to measure the height, width, and depth including flooring, countertop overhang, molding, or trim to ensure proper installation and clearance.
For optimal usage and the ability to open the refrigerator doors completely, it is recommended not to install the refrigerator next to a wall. Adequate clearance should be provided at the rear for proper air circulation and water/electrical connections (minimum of 2 inches) and at the sides and top for ease of installation.
Please note that the above dimensions and cutout information are for planning purposes only. For complete installation details, consult the manual packed with the product or download the manual online at samsung.com.
Product Usage Instructions
- Ensure that the refrigerator will fit in the desired location by measuring the width (including countertop overhang), depth (including molding or trim), and height (including flooring and hinge clearance if needed).
- Allow a minimum clearance of 2 inches at the rear of the refrigerator for proper air circulation and connections.
- Allow a minimum clearance at the sides and top of the refrigerator for ease of installation.
- Avoid installing the refrigerator next to a wall to ensure the doors can be opened completely.
- If the refrigerator needs to be transported to a specific location, walk the delivery route and identify the narrowest opening it needs to pass through. Ensure that the appliance’s depth or width is smaller than the width of the narrowest opening.
32 cu. ft. 3-Door French Door Refrigerator
MODEL RF32CG5100
DIMENSIONS
Be sure your new fridge will fit
Don’t wait until delivery to be sure your new refrigerator will fit – both in
your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with confidence.
Be sure your new fridge will fit
Don’t wait until delivery to be sure your new refrigerator will fit – both in
your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with confidence.
- TOP OF REFRIGERATOR WITH DOOR OPEN 90°
- TOP OF REFRIGERATOR WITH DOORS OPEN 125°
Installation clearances
- Allow 3 ¾” of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
- Allow 2″ minimum clearance at the rear for proper air circulation and water/electrical connections.
- Allow a ⅜” minimum clearance at the sides and top for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not install next to a wall.
Please note : The above dimensions and cutout information is for planning purposes only. For complete installation details, consult the manual packed with products or download the manual online at samsung.com.
Walk the delivery route
- Identify the narrowest opening that the appliance will travel through, from outside the home to the location where it will be installed.
- Appliance depth or width must be smaller than the width of the narrowest opening