Simply Retrofits 4 Inch Slim Fire Rated Panel Instructions
- June 12, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits 4 Inch Slim Fire Rated Panel Instructions
Choosing A color temperature Before Installing
- Use the slide switch to choose a color temperature before installing. 5000K (5K),4000K (4K), 3500K (35K),3000K (3K),2700K (27K).
5-way color changing:
You can lock in one color temperature, change among multiple color
temperatures, dim from 10%-100%
2-HOUR FIRE RATING
VO-RP4W10-120-D-5Way-FR has been tested to comply with: UL 263,ASTM E119 & CAN
ULC S101
Compatible fixtures (sold separately)
VO-RP4W10-120-D-5Way-FR
- 4″ Slim Round Panel LED (WITH SELECTABLE COLOR TEMPERATURES)
Connecting The Lamp Body with the driver
Quick connect
Integrated driver is dimmable with most regular dimmers (Low voltage electronic dimmer suggested) Refer to Votatec® website for dimmer compatibility list.
Warranty:
Votatec® offers a warranty of 5 years from the date of purchase that covers
repair or replacement of defective parts of the housing, optics, and
electronics.
Installation Instruction
WARNING
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE
CIRCUIT BREAKER. WARNING.
Installation Instruction
-
Drill hole in ceiling and prepare supply wires. Install and unshield the line feed wire 12″( 25cm) and strip wires 5/8″ (1.6 cm). Bring supply power to junction box through knockout.
-
Open the lid of the junction box. Use the wirenuts to match the white wire from the line feed with the white wire of the junction box, to match the black wire from the line feed with the black wire of the junction box and to match the copper wire from the line feed and with the green wire of the junction box.
-
Route junction box through cut-out and connect recessed LED pannel to junction box with the quick connector.
-
Compress the springs and push the fixture in the opening. It is easier to do one spring at a time.
