Westfalia 811530 150mm Digital Caliper Instruction Manual

Westfalia 811530 150mm Digital Caliper

Product Description

Dear Customers,

Instruction manuals provide valuable hints for using your new device.
They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

SAFETY NOTES

Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury:

• This manual belongs to the product. It contains important notes on operating the unit. Please pass it on along with the unit if it is handed over to a third party!
• Dispose of the packaging materials carefully; the plastic bags may become a deadly toy for children.
• The unit does not belong into the hands of children. Keep it out of reach of children and persons in need of supervision. Do not leave it lying around and make sure it cannot become a toy.
• Do not expose the unit to humidity, excessive temperatures or strong vibrations and avoid strong mechanical stresses. Never immerse the unit into liquids of any kind.
• Do not disassemble, burn, or short-circuit batteries and do not attempt to recharge non-rechargeable batteries.
• Do not disassemble the unit or attempt to repair it yourself. It does not contain parts serviceable by you. In case of questions or problems, turn to our customer support

| Batteries do not belong in the household garbage.
For battery disposal please check with your local council.|
---|---|---

OPERATION

Before first Use
Unpack the Digital Calliper and check it for any damage in transit. Dispose of packaging materials or store them out of reach of children. Plastic bags etc. may become a deadly toy for children.

Inserting/Replacing the Battery

1. The battery compartment (4) is located right to the display (2) of the Digital Calliper. Slide the battery compartment cover in the direction indicated by the arrow icon and remove it from the device. Insert a new battery of the type SR44. Pay attention to the proper polarity of the battery. The plus pole has to face up.
2. Push the battery compartment cover back on the battery compartment and close it.
3. Replace the battery if the display readability gets weaker or if you get irreproducible measuring results.
   

Taking Measurements

1. Preparations: Before measuring clean the surface of the object to be measured and, if necessary, wipe the measuring scale of the Digital Calliper using a dry cloth.
2. Press the ON/OFF key (7) or disperse the measuring jaws a little bit to switch on the Digital Calliper. The display shows any value.
3. Use the unit toggle key (3) to display the measured values either in the unit “mm” or in the unit “inch”.
4. Entirely close the measuring jaws.
5. Press the zero setting key (6) to set the display to zero.
6. Use the short internal measuring jaws (1) to measure internal dimensions (see figure below).
7. Use the long external measuring jaws (8) to measure external dimensions (see figure below).
8. Read the measured distance either on the display (2) or on the corresponding scale (5a) resp. (5b).
9. Repeat steps 4 – 8 for further measurements.
10. Press the ON/OFF key to switch off the Digital Calliper again. When not in use, the device automatically switches off after a few minutes.
    Measuring internal dimensions
    
    Measuring external dimensions
    

Cleaning and Storing

• Only use a soft, lit free cloth to clean the unit. Do not use aggressive chemicals or abrasives and do not use liquids.
• If you do not plan to use the unit for some time, please remove the battery.
• Store the unit indoors in a place that is protected from moisture, dust, dirt and extreme temperatures.
• Store the unit out of reach of children.

TECHNICAL DATA

Name: Digital Calliper 150 mm
Battery: SR44 (or LR44 resp. AG13)
Measurement Range: 0 – 150 mm / 0 – 6”
Display Resolution: 0,1 mm and 0,01”
Error of Measurement: +/- 0,2 mm / 0,01”
Working Temperature: 0 – 40 ºC
Storing Temperature: -20 to +70 ºC
Humidity: ≤ 80 %
Dimensions: 243 x 76 x 17 mm
Weight: Approx. 58 g incl. Battery

EU DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product

Digital Caliper 150 mm
Article No. 81 15 30

is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

2014/30/EU
Electromagnetic Compatibility (EMC)
EN 61326-1:2013, EN 61326-2-2:2013

Thomas Klingbeil,
Qualitätsbeauftragter / QA Representative

CUSTOMER SERVICES

SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>