NOYAFA NF-8509 Cable Tracer with Digital Multimeter User Manual

Your excellent helper in cable test!
NF-8509 Wire Tracker with Multimeter
User Manual

Product Introduction

NF-8509 multifunctional digital multimeter and wire tracer is designed with cable testing function and multimeter function.

1. Network cable testing functions :cable length test,wire continuity test,wire scanning test,POE test,and Port flash.
2. Digital Multimeter (DMM) functions:AC/DC voltage test, continuity test, diode test. temperature test, NCV test, resistance test, AC /DC current test.
   Note: Wire scanning is enabled by default after turn on the device.

Operating instructions of cable testing functionality

1. Wire scanning: In wire scanning mode, press” ” button, the screen shows “Vindicating digital wire scanning mode. Press” ” button again, the screen shows “2” indicating analog wire scanning mode.
   Note: maximum wire scanning distance: 5 600 meters under no load; Si. 000 meters under load.

2. Wire mapping: Press” ” button to enable wire mapping function, then press  button to perform wire mapping test (up to 2, 000 meters).

3. Port flashing: Press” “button to enable port flashing function, then press’ ” button to perform port flashing detection (10M/100M/1, 000M identification).

4. Length test function: press” ” button to enable length test function, then press “button to perform length test (range: 5-200 meters).

5. POE function: Press button to enable POE function, and the device will automatically detect the POE voltage.

Operating instructions of multimeter functionality

After power-on, press ” ” to enter the multimeter function mode. Press “ ” button again to switch among AC voltage, DC voltage, diode/continuity, NCV, resistance, DC/AC current, frequency, and ambient temperature tests. After selecting the desired function, Press “ ” button to start testing. The device defaults to AC voltage test.

1. AC/DC voltage measurement: 600mV-610V.
2. Continuity test: to detect the connectivity performance of wires and various conductors (the buzzer will sound when resistance is below 500).
3. Diode measurement: to identify the polarity and forward voltage drop of diodes (0-3.3V).
4. NCV function: AC signals can be detected when the device is close to the AC signal source (0-4 levels).
5. Resistance measurement: 6000-60M0.
6. AC/DC measurement range: 1 mA-3A DC (accuracy: ±0.8%+3).
7. Frequency: 0-10MHz (accuracy: ±1.0%+3).
8. Others: to display the ambient temperature.

Battery level indication

1. Transmitter: 0% indicate low battery level, please recharge it in time.
2. Receiver: Power indicator flashes, indicating low battery level, please replace it in time.

Packing List

Product Parameters

POE voltage detection
Continuity test| Detect The connectivity performance of of wires and variousconductors,The buzzer will sound when resistance is below 500.
Identifythe polarity and forward voltage drop of diodes (0-3.3V)
NCV function| Inductive voltage detector (0-4 levels)
Resistance measurement| 6000Ω-Ω60M0 (accuracy: ±1 .0%+5)
AC/DC voltage
measurement| 600mV-610V (DC accuracy: t0 ±0.5%+3; AC accuracy: t0±0.5%+3)
AC/DC measurement| lmA-3A DC (accuracy: ±0.8%+3)
Frequency| 0.10MHz (accuracy: ±1.0%+3)
Power| 3.7V/1,500mA lithium battery
Ambient temperature display|
Dimensions| 137.5 x 76 x 34mm
Receiver| LED light|
Telephone function| ****
Power| DC9V (exclusive)
Maximum working current| ≦ 4150mA
Dimensions| 204.9 X 38 X 29mm

Your excellent helper in cable test!

Documents / Resources

| NOYAFA NF-8509 Cable Tracer with Digital Multimeter [pdf] User Manual
NF-8509 Cable Tracer with Digital Multimeter, NF-8509, Cable Tracer with Digital Multimeter, Cable Tracer, Tracer
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>