SAMSUNG DV53BB8900 7.8 cu. ft. Ultra Capacity Ventless Hybrid Heat Pump Dryer User Manual

SAMSUNG DV53BB8900 7.8 cu. ft. Ultra Capacity Ventless Hybrid Heat Pump

Dryer

Product Information

• Product Name: Dryer
• Model Number: DV53BB8900**
• User Manual: DV8900HB_SimpleUX_WEB_OID57652_01_English.indd
• Date and Time: 2023/6/29 15:27:53
• Language: English

Product Usage Instructions

Safety Information:

• Read the user manual to understand the installation, use, and care of the dryer.
• Follow the safety instructions and symbols provided in the user manual.
• Store the user manual in a safe place for future reference.

Installation Requirements:

• Refer to the installation requirements section in the user manual for key installation requirements, location considerations, ducting requirements, exhausting requirements, gas requirements, and electrical requirements.
• Follow the step-by-step installation guide provided in the user manual.
• Connect the drain hose as instructed in the user manual.
• Use the installation checklist to ensure all necessary steps are completed. If needed, follow the instructions for door reversal.

Before Using the Dryer:

• Refer to the exhaust ducting guide (if applicable) for proper setup.
• Perform initial setup steps as outlined in the user manual.
• Sort and load your laundry according to the instructions provided.
• Ensure functional prerequisites are met before starting the dryer.

Operations:

• Familiarize yourself with the control panel and its functions.
• Follow the instructions for operating a cycle.
• Refer to the cycle overview, options, settings, special features, cycle chart, and drying guide for more information on different drying cycles and their settings.

Maintenance

• Regularly empty the water tank as instructed in the user manual.
• If applicable, install the micro soft filter following the provided instructions.
• Follow the cleaning instructions to keep the dryer in good condition.

Troubleshooting

• Refer to the troubleshooting section for common issues and solutions.
• Check information codes to identify any error messages displayed.

Specifications

• Refer to the specification sheet for detailed product
  specifications.

• Consult the fabric care chart for guidance on drying different
  types of fabrics.

Protecting the Environment:

• Follow the guidelines provided to minimize environmental impact.

Dryer
User manual
DV53BB8900**

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 1

2023/6/29 15:27:53

English

Safety information

Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features.
What you need to know about the safety instructions
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance. Please store the manual in a safe location close to the appliance for future reference. Use this appliance only for its intended purpose as described in this instruction manual. Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution and care when installing, maintaining and operating your dryer. Because the following operating instructions cover various models, the characteristics of your dryer may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or find help and information online at www. samsung.com.
Important safety symbols
What the icons and signs in this user manual mean:
WARNING Hazards or unsafe practices that may result in severe personal injury, death and/or property damage.
CAUTION Hazards or unsafe practices that may result in personal injury and/or property damage.
NOTE Indicates that a risk of personal injury or material damage exists.
These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it.

SAVE THESE INSTRUCTIONS
4 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 4

2023/6/29 15:27:53

English

WARNING – Risk of Fire
· Clothes dryer installation must be performed by a qualified installer.
· Install the clothes dryer according to the manufacturer’s instructions and local codes.
· Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.
· Do not install a booster fan in the exhaust duct. · To reduce the risk of severe injury or death, follow all installation
instructions. · Save these instructions.

SAVE THESE INSTRUCTIONS
English5

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 5

2023/6/29 15:27:53

Safety information

English

WARNING – To reduce the risk of fire or explosion:
· Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed. There are many highly flammable items used in homes, such as acetone, denatured alcohol, gasoline, kerosene, some liquid household cleaners, some spot removers, turpentine, waxes, and wax removers.
· Items containing foam rubber (which may be labeled latex foam) or similarly textured rubberlike materials must not be dried on a heat setting. Heated foam rubber materials can, under certain circumstances, ignite spontaneously.
WARNING – Fire or explosion hazard
· Failure to follow safety warnings exactly could result in serious injury, death or property damage.
· Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance.
· Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
· Do not install a booster fan in the exhaust duct.

SAVE THESE INSTRUCTIONS
6 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 6

2023/6/29 15:27:54

English

WARNING – What to do if you smell gas: · Do not try to light any appliance. · Do not turn on the appliance. · Do not touch any electrical switch. · Do not use any phone in your building. · Clear the room, building or area of all occupants. · Immediately call your gas supplier from a neighbor’s phone. Follow
the gas supplier’s instructions. · If you cannot reach your gas supplier, call the fire department.
CALIFORNIA PROPOSITION 65 WARNING
WARNING
Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

SAVE THESE INSTRUCTIONS
English7

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 7

2023/6/29 15:27:54

English

Safety information
Important safety precautions
WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. 3. Do not use the dryer to dry clothes which have traces of any flammable substance, such as vegetable oil, cooking oil, machine oil, flammable chemicals, paint thinner, etc., or anything containing wax or chemicals, such as mops and cleaning cloths. Flammable substances may cause the fabric to catch fire by itself. 4. Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance. 5. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 6. Before the appliance is removed from service or discarded, remove the door to the drying compartment. 7. Do not reach into the appliance if the drum is moving. 8. Do not install or store this appliance where it will be exposed to the weather. 9. Do not tamper with internal controls. 10. Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out. 11. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product. 12. Clean the lint screen before or after each load. 13. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials. 14. Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt. 15. The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel. 16. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire. To reduce the risk of fire due to contaminated loads, the final part of a tumble dryer cycle occurs without heat (cool down period). Avoid stopping a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. 17. This appliance must be grounded. See “Electrical requirements” and “Grounding” in “Installation” section.
SAVE THESE INSTRUCTIONS
8 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 8

2023/6/29 15:27:54

English

18. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
19. Do not insert your hand under the dryer. – This may result in injury.
20. Take care that children’s fingers are not caught in the door when closing it. – This may result in injury.
21. The control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. – Do not contact these parts while the appliance is energized.
Warnings
WARNING · Ensure pockets are free of small, irregularly shaped hard objects and foreign material, i.e. coins, knives,
pins, etc. These objects could damage your dryer. · Gas leaks may occur in your system, resulting in a dangerous situation.
Cautions
CAUTION · Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary
when the appliance is used near children and pets. · Before discarding or removing your dryer from service, remove the door to the drying compartment to
prevent children or animals from becoming trapped inside. · Do not reach into the appliance when the drum is moving. · Do not install or store this appliance where it will be exposed to the weather. · Do not tamper with the controls. · Do not repair, replace, or attempt to service any part of the appliance unless specifically instructed to in
the user-repair instructions and you have the understanding and skills to carry out the procedure. · Do not use fabric softeners or products to eliminate static unless the softener or product is
recommended for dryer use by the manufacturer of the fabric softener or product. · Clean the lint screen before or after each load. · Keep the area around the exhaust opening and surrounding areas free from lint, dust, and dirt. · The interior of the dryer and exhaust duct should be cleaned periodically by qualified service personnel. · This appliance must be properly grounded. Never plug the power cord into a receptacle that is
not grounded adequately or not in accordance with local and national codes. See the installation instructions for information about grounding this appliance. · Do not sit on top of the dryer. · Do not dry clothing with large buckles, buttons, or other heavy metal or solid objects. · Gas leaks may not be detected by smell alone.
SAVE THESE INSTRUCTIONS
English9

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 9

2023/6/29 15:27:54

English

Safety information
· Gas suppliers recommend you purchase and install a UL-approved gas detector. · Install and use in accordance with the manufacturer’s instructions. · Do not place items in your dryer that have been spotted or soaked with vegetable oil or cooking oil. Even
after being washed, these items may contain significant amounts of these oils. · Residual oil on clothing can ignite spontaneoulsy. The potential for spontaneous combustion increases
when items containing vegetable oil or cooking oil are exposed to heat. Heat sources such as your dryer can warm these items, allowing an oxidation reaction in the oil to occur. Oxidation creates heat. If this heat cannot escape, the items can become hot enough to catch fire. Piling, stacking, or storing these kinds of items may prevent heat from escaping and can create a fire hazard. · All washed and unwashed fabrics that contain vegetable oil or cooking oil can be dangerous. Washing these items in hot water with extra detergent will reduce, but not eliminate, the hazard. Always use the Cool Down cycle for these items to reduce their temperature. Never remove these items from the dryer hot or interrupt the drying cycle until the items have run through the Cool Down cycle. Never pile or stack these items when they are hot.

SAVE THESE INSTRUCTIONS
10 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 10

2023/6/29 15:27:54

English

Regulatory notice
FCC Notice
CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received including interference that cause undesired
operation.
For products sold in the US and Canadian markets, only channels 1­11 are available. You cannot select any other channels.
FCC STATEMENT: This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorienting or relocating the receiving antenna · Increasing the separation between the equipment and receiver · Connecting the equipment to an outlet that is on a different circuit than the radio or TV. · Consulting the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be colocated or operated in conjunction with any other antenna or transmitter.

SAVE THESE INSTRUCTIONS
English11

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 11

2023/6/29 15:27:54

English

Regulatory notice
Unintentional emitter per FCC Part 15 Product type : Clothes Dryers Model : DV53BB8900** Responsible Party ­ U.S. Contact Information Samsung Electronics America, Inc. QA Lab America 19 Chapin Rd. Building D Pine Brook NJ 07058 Tel: 1-973-808-6375 Fax: 1-973-808-63
IC Notice
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of
the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. For products sold in the US and Canadian markets, only channels 1­11 are available. You cannot select any other channels. IC RADIATION EXPOSURE STATEMENT: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be colocated or operated in conjunction with any other antenna or transmitter.

SAVE THESE INSTRUCTIONS
12 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 12

2023/6/29 15:27:54

English

Open Source Announcement
The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CDROM; a minimal charge will be required. The following URL http://opensource.samsung.com/opensource/SMART_AT_051/seq/0 leads to the download page of the source code made available and open source license information as related to this product. This offer is valid to anyone in receipt of this information.

NOTE Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. Wi-Fi max transmitter power : 20 dBm at 2.412 GHz ­ 2.472 GHz
SAVE THESE INSTRUCTIONS
English13

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 13

2023/6/29 15:27:54

English

Installation requirements

Read through the following instructions before installing the dryer and keep this manual for future reference.
WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel – Do not contact the following parts while the appliance is energized: Control board and inlet valve.
Key installation requirements
· A grounded electrical outlet. · A power cord for electric dryers (except in Canada). · Gas lines (for gas models) that meet national and local regulations. · An exhaust system made of rigid metal or flexible stiff-walled metal exhaust duct. (Not applicable to
ventless (heat pump) models)
WARNING Remove the door from all discarded appliances to prevent a child from suffocating.
Location considerations
The dryer should be located where there is enough space at the front for loading the dryer and behind space behind for the exhaust system. This dryer is factory-ready for the rear exhaust option. To exhaust out the bottom, right or the left, use the accessory exhaust kit. Instructions are included with the kit. Make sure the room in which the dryer is located has enough fresh air. The dryer must be located where there are no air-flow obstructions. For gas dryers, adequate clearance must be maintained as noted on the data plate to ensure adequate air for combustion and the proper dryer operation. The dryer must not be installed or stored in an area where it will be exposed to water and/or weather. The dryer area must be kept clear of combustible materials, gasoline, and other flammable vapors and liquids. A dryer produces combustible lint. The area around the dryer should be kept lint-free.

14 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 14

2023/6/29 15:27:54

English

Dimensions

Dimensions (in. (mm))

Type Models
A. Overall height B. Width
C. Depth with the door open D. Depth

Front loading dryer DV53BB8900** 38.7 (984) 27 (686) 56.1 (1425) 34.3 (872)

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 15

English15
2023/6/29 15:27:54

English

Installation requirements

Clearance requirement This clearance requirement is applicable for dryers only.
NOTE · For the washer’s clearance requirement, see the washer’s user manual. · If the washer and dryer have different clearance requirements, use the one with the larger value.
Alcove or closet installations
WARNING · The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or
closet. · No other fuel-burning appliance should be installed in the same closet as the dryer. · Place the dryer at least 18 in. (460 mm) above the floor for a garage installation. Minimum clearance for stable operation:

Sides 1 in. (25 mm)

Top 1 in. (25 mm)

Rear 2 in. (50 mm)

Front 1 in. (25 mm)

If both the washer and a dryer are installed in the same location, the front of the alcove or closet must have two unobstructed air openings for a combined minimum total area of 72 in.2 (465 cm2).

16 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 16

2023/6/29 15:27:54

English

Undercounter installation

A

B

C

Pedestal installation

A

39.7 in. (1009 mm)

B

1 in. (25 mm)

C

1 in. (25 mm)

A

2 in. (50 mm)

B

6 in. (152 mm)

C

52.8 in. (1341 mm)

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 17

English17
2023/6/29 15:27:55

Installation requirements

This clearance requirement is applicable for washer and dryer pair installation.

Side-by-side installation

Stacked installation

English

A

1 in. (25 mm)

B*

2 in. (50 mm)

C

2 in. (50 mm)

D

6 in. (152 mm)

E

77.5 in. (1968 mm)

(B): This clearance requirement only applies to the dryer. For the washer’s clearance requirement, see the washer’s user manual.
NOTE
Stacking (SKK-9AL) Many of Samsung’s washers and dryers can be stacked to maximize usable space. You can purchase an optional stacking kit from your Samsung retailer. For details about stacking and compatible models, refer to the user manual included in the stacking kit you purchase.

18 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 18

2023/6/29 15:27:55

English

Ducting requirements (Not applicable to ventless (heat pump) models)

Recommended

Use only for short-run installation

Weather hood type

No. of 90° elbows 0 1 2 3

4″ (10.2 cm) Rigid
80 ft. (24.4 m) 68 ft. (20.7 m) 57 ft. (17.4 m) 47 ft. (14.3 m)

2.5″ (6.4 cm) Rigid
74 ft. (22.6 m) 62 ft. (18.9 m) 51 ft. (15.5 m) 41 ft. (12.5 m)

NOTE * Use a 4-inch (10.2 cm) diameter rigid aluminum or galvanized steel duct.
If you integrate the dryer’s vent system with an existing exhaust system: · Make sure the exhaust system meets all applicable local, state, and national regulations. · Verify you are not using a flexible plastic duct. · Make sure to check for and remove all lint buildup from inside the existing ducts. · Confirm the duct is not kinked or crushed. · Make sure the exhaust hood damper opens and closes freely.
Manometer measurements The static pressure in any exhaust system must not exceed 0.83 inches of water column or be less than 0. Note that these values are measured with the dryer running with a manometer presented to the exhaust duct that connects to the dryer. The dryer’s drum must be empty and the lint filter must be clean.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 19

English19
2023/6/29 15:27:55

English

Installation requirements
Exhausting requirements (Not applicable to ventless (heat pump) models)
The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a building. Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the room.
In the United States and Canada · All dryers must be exhausted to the outside. · The required exhaust duct is 4 inches (10.2 cm) in diameter. · See the “Ducting requirements (Not applicable to ventless (heat pump) models)” section for the
maximum duct length and number of elbows that can be used. · The total length of the flexible metal duct must not exceed 7′ 101/2″ (2.4 m). · Do not assemble the duct with screws or other fasteners that extend into the duct and catch lint. · For the United States only: Use only those foil-type flexible ducts, if any, specifically identified for use
with the appliance by the manufacturer and that comply with the Outline for Clothes Dryer Transition Duct. Use Subject 2158A.
Outside the United States and Canada · Refer to the local codes.
WARNING · You must exhaust the dryer to the outside to reduce the risk of fire when you install the dryer in an
alcove or closet. · Do not use a plastic or non-metal flexible duct. · If your existing ductwork is plastic, non-metal, or combustible, replace it with metal. · Use only a metal exhaust duct that is non-flammable to ensure containment of exhaust air, heat, and
lint.

20 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 20

2023/6/29 15:27:55

English

Gas requirements (Not applicable to ventless (heat pump) models)
WARNING
· Use only natural or LP (liquid propane) gases. · The installation must be conformed with local codes, or in the absence of local codes, with the national
fuel gas code, ANSI Z223.1/NFPA 54, latest revision (for the UNITED STATES), or with the natural gas and propane installation code, CSA B149.1 (for Canada). · Gas dryers are equipped with a burner vent for use with natural gas. If you plan to use your dryer with LP (liquid propane) gas, it must be converted for safe and proper performance by a qualified service technician. (LNG models only) You must check the burner of your model and use the proper LP Kit accordingly. To check the detail information of the burner, open the door and check the rating label location on the door frame. – 20,000 BTU: LPKIT-4/XAA (DC98-04114A) – 22,000 BTU: LPKIT-3/XAA (DC99-00792A) · A 1/2″ (1.27 cm) gas supply line is recommended and must be reduced to connect to the 3/8″ (1 cm) gas line on your dryer. The National Fuel Gas Code requires that an accessible, approved manual gas shutoff valve be installed within 6″ of your dryer. · Gas dryers installed in residential garages must be raised 18 inches (46 cm) above the floor. · Additionally, a 1/8″ (0.3 cm) N.P.T. (National Pipe Thread) plugged tapping, accessible for test gauge connection, must be installed immediately upstream of your dryer’s gas supply connection. · Your dryer must be disconnected from the gas supply pipe system during any pressure testing of the system. · Do not reuse old flexible metal gas lines. Flexible gas lines must be designed and certified by the standard for connectors for Gas Appliances, ANSI Z21.24 · CSA 6.10.
NOTE
· Your dryer uses an automatic ignition system to ignite the burner. There is no constant burning pilot. · Any pipe joint compound used must be resistant to the action of any liquefied petroleum gas. · As a courtesy, most local gas utilities will inspect a gas appliance installation.
Commonwealth of Massachusetts installation instructions Your dryer must be installed by a licensed plumber or gas fitter. A “T” handle manual gas valve must be installed in the gas supply line to your dryer. If a flexible gas connector is used to install your dryer, the connector can be no longer than 3′ (36″).
WARNING
· Gas leaks may occur in your system, creating a dangerous situation. · Gas leaks may not be detected by smell alone. · Gas suppliers recommend you purchase and install a UL-approved gas detector. · Install and use in accordance with the manufacturer’s instructions.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 21

English21
2023/6/29 15:27:55

English

Installation requirements
Electrical requirements
The wiring diagram is located on the plate under the control panel or rear frame.
WARNING When local codes allow, you can connect the dryer’s electrical supply with a new power supply cord kit, marked for use with a dryer, that is U.L. listed and rated at a minimum of 120 / 240 volts, 30-amperes with three No. 10 copper wire conductors terminated with closed loop terminals, open-end spade lugs with turned up ends, or with tinned leads. · Improperly connecting the equipment grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer is properly grounded. Do not modify the plug provided with your dryer ­ if it doesn’t fit the outlet, have a proper outlet installed by a qualified electrician. · To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with local codes, or in the absence of local codes, in accordance with the National Electrical Code, ANSI/NFPA No. 70-Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 ­ Latest Revisions and local codes and ordinances. It is your responsibility to provide adequate electrical service for your dryer. · All gas installations must be done in accordance with the National Fuel Code ANSI/Z2231 ­ Latest Revision (for the U.S.) or CAN/CGA ­ B149 Installation Codes ­ Latest Revision (for Canada) and local codes and ordinances.
Grounding This dryer must be grounded. In the event of a malfunction or breakdown, the ground will reduce the risk of electrical shock by providing a path of least resistance for the electrical current.
Gas models
WARNING · Your dryer has a cord with an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. · Do not modify the plug provided with your dryer ­ if it doesn’t fit the outlet, have a proper outlet installed by a qualified electrician. · Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Electric models
WARNING · Your dryer has an optional cord with an equipment-grounding conductor and a grounding plug. This
cord is sold separately. · The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. · Do not modify the plug provided with your dryer ­ if it doesn’t fit the outlet, have a proper outlet
installed by a qualified electrician.

22 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 22

2023/6/29 15:27:55

English

· If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer.
Electrical connections Before operating or testing, follow all grounding instructions in the “Grounding” section. An individual branch (or separate) circuit serving only your dryer is recommended. Do not use an extension cord.
Gas models ­ U.S. and Canada A 120 volt, 60 Hz AC approved electrical service with a 15-ampere fuse or circuit breaker is required.
Electric models ­ U.S. only Most U.S. dryers require a 120 / 240 volt, 60 Hz AC approved electrical service. Some require 120 / 208 volt, 60 Hz approved electrical service. The electric service requirements can be found on the data label located behind the door. A 30-ampere fuse or circuit breaker on both sides of the line is required. · If a power cord is used, the cord should be plugged into a 30-ampere receptacle. · The power cord is not provided with U.S. electric model dryers. This cord is sold separately.
Risk of Electric Shock
WARNING When local codes allow, you can connect the dryer’s electrical supply with a new power supply cord kit, marked for use with a dryer, that is U.L. listed and rated at a minimum of 120 / 240 volts, 30-amperes with three No. 10 copper wire conductors terminated with closed loop terminals, open-end spade lugs with turned up ends, or with tinned leads. · Do not reuse a power supply cord from an old dryer. The power cord electric supply wiring must be
supported at the dryer cabinet by a suitable UL-listed strain relief. · Grounding through the neutral conductor is prohibited for (1) new branch- circuit installations, (2)
mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductor. (Use a 4-prong plug for a 4­wire receptacle, NEMA type 14-30R.)
Electric models ­ Canada Only A 120 / 240 volt, 60 Hz AC approved electrical service fused through a 30-ampere fuse or circuit breaker on both sides of the line is required.
NOTE All Canadian models are shipped with the power cord attached. The power cord should be plugged into a 30-ampere receptacle. In Canada, you may convert a dryer to 120 / 208 volts.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 23

English23
2023/6/29 15:27:55

English

Installation
This dryer must be installed by a qualified technician. The installer is responsible for connecting the dryer to the main power while observing the relevant safety regulations of your area.
What’s included
Make sure all the parts are included in the product package. If you have a problem with the dryer or the parts, contact a local Samsung customer center or the retailer.
01 02

03 05
04

01 Worktop 04 Door

02 Control panel

03 Lint filter

24 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 24

2023/6/29 15:27:56

English

Accessories (supplied)

User manual

Long drain hose (2 m)

Cable tie

Cleaning brush

Micro soft filter (Optional Filter)

Hose connector

Hose guide
NOTE · The stacking kit allows the dryer to be stacked on top of a washer. Please note that the stacking kit can
only be used with Samsung washers and dryers. To purchase a stacking kit above, contact a Samsung service center or local appliance retailer. The stacking kit differs with the washer model. · For stacking instructions with the dryer, see the installation manual included in the stacking kit. · For information on which stacking kit model you can use to stack your dryer on the washer, see the user manual included in your Samsung washer.
WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 25

English25
2023/6/29 15:27:56

English

Installation
Step-by-step installation
Make sure you have a qualified technician install the dryer. Step-by-step installation instructions start below. · Do not remove the protective film on the door before completing the product installation. If you remove
the protective film before the installation is complete, the door may get scratched or damaged during installation. · Make sure the installation location allows enough space for the dryer door to be fully open.
STEP1Install the exhaust system
1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer.
2. To change the door direction, see “Door reversal” on page 36. 3. Install the exhaust system as instructed in the “Exhaust ducting guide (Not applicable to ventless (heat
pump) models)” section. (Not applicable to ventless (heat pump) models)
CAUTION Before installing your dryer, remove the packing in the duct.
NOTE · To move the dryer easily, lay two of the carton cushions from the packaging on the floor. Tip the dryer
on its side so it lies across both cushion-tops. Push the dryer so that it is near its final location, and then set the dryer upright. · Secure room around the dryer to facilitate ducting and wiring.
STEP2Connect the gas line (for gas models)
Before connecting the gas line, make sure you have read the “Gas requirements (Not applicable to ventless (heat pump) models)” section on page 21. 1. Remove the protective cap from the gas pipe. 2. Apply an LPG (Liquefied Petroleum Gas)-safe compound or 1.5 wraps of Teflon tape to all threaded
connections. 3. Connect the gas supply to the dryer. An additional fitting is required to connect the 3/4″ (1.9 cm) female
thread end of a flexible connector to the 3/8″ (1 cm) male threaded end on the dryer. Tighten up the fitting over all threads. 4. Turn on the gas supply, and check for any leaks using a soap solution. If a leak is found, tighten the connections and try again. Do not use an open flame to check for gas leaks.

26 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 26

2023/6/29 15:27:57

English

STEP3Connect the electrical wiring (for electric models) Before connecting the electrical wiring, make sure you have read the “Electrical requirements” section on page 22.
3-wire system

D

A B C L2

L1 E

A. External ground connector B. Neutral grounding wire (white) C. Center silver-colored terminal block
screw D. Neutral wire (white or center wire) E. 3/4″ (1.9 cm) UL-listed strain relief

1. Loosen or remove the screws from the center terminal block.
2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block. Tighten the screws.
3. Connect the other wires to the outer terminal block screws. Tighten the screws.
4. Tighten the strain relief screws. 5. Insert the terminal block cover into the rear panel of
the dryer. Then, secure the cover with a hold-down screw.
CAUTION
· To convert from the 4-wire system to a 3-wire system, connect the ground strap to the terminal block support to ground the dryer frame to the neutral conductor.
· Ring-type terminals are recommended. If using strap terminals, make sure they are tightened.
· Connect the power cord and check the L1/L2/D (N) voltage. If the voltage is low, it may not heat properly. Review the “Electrical requirements” section on page 22 if needed.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 27

English27
2023/6/29 15:27:57

English

Installation

4-wire system

F D

A B C L2

L1 E

A. External ground connector B. Neutral grounding wire (white) C. Center silver-colored terminal block
screw D. Neutral wire (white or center wire) E. 3/4″ (1.9 cm) UL-listed strain relief F. Neutral wire (white or center wire)

1. Remove the external ground connector’s screw and connect the ground wire (green or unwrapped) of the power cable to the screw.
CAUTION – To connect the ground wire to the neutral position
without through contact A (cabinet ground), contact a technician. This is not user serviceable. – Ring-type terminals are recommended. If using strap terminals, make sure they are tightened. 2. Loosen or remove the screws from the center terminal block. 3. Connect the neutral wire (white or center wire) and ground wire (white) to the center screw of the terminal block. Tighten the screw. 4. Connect the other wires to the outer terminal block screws. Tighten the screws. 5. Tighten the strain relief screws. 6. Insert the tab of the terminal block cover into the rear slot of the dryer. Secure the cover with a holddown screw.

CAUTION
Connect the power cord and check the L1/L2/D (N) voltage. If the voltage is low, it may not heat properly. Review the “Electrical requirements” section on page 22 if needed.
WARNING
· All U.S. models are designed for a 3-wire system connection. The dryer frame is grounded to the neutral conductor at the terminal block. A 4-wire system connection is required for new or remodeled construction, mobile homes, or if local codes do not permit grounding through neutral. If you use the 4-wire system, you cannot ground the dryer frame to the neutral conductor at the terminal block.
· Remove the terminal block cover plate. Insert the power cord with a UL- listed strain relief through the hole provided in the cabinet near the terminal block.
· A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8″ (1 cm) deep well socket.
· Since January 1, 1996, the National Electric Code requires that new wiring (not existing) utilize a 4-wire connection to this dryer.

28 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 28

2023/6/29 15:27:57

English

STEP4Level the dryer
To ensure optimal performance, the dryer must be level.
Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, turn the leveling feet (B) clockwise to lower the dryer or counterclockwise to raise the dryer.
A

B

NOTE

· To set the dryer to the same height as your washer,

fully retract (A) the leveling feet by turning them

counterclockwise, then loosen (B) the feet by turning

them clockwise. Once the dryer is the same height as

A

B

the washer, follow the directions above to level the

dryer.

· Adjust the leveling feet only as much as necessary to

level the dryer. Extending the leveling feet more than

necessary can cause the dryer to vibrate.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 29

English29
2023/6/29 15:27:57

English

Installation

STEP5Power on (for gas models)
Make sure all gas connections, the exhaust line, and all wiring are connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 6 below.
STEP6Final Check
When the installation is complete, confirm that: · The dryer is plugged into an electrical outlet and grounded properly. · The exhaust ductwork is connected, and the joints are taped. · You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. · The dryer is level and is sitting firmly on the floor. · The dryer starts, runs, heats, and shuts off properly. · The gas is supplied properly with no leaks (For gas models only).
CAUTION The burner may not ignite initially due to air in the gas line. Allowing your dryer to operate on a heat setting will purge the line. If the gas does not ignite within 5 minutes, turn your dryer off and wait 5 minutes. Be sure the gas supply to your dryer has been turned on. To confirm gas ignition, check the exhaust for heat.
Connect the drain hose

Draining directly into a drainage system

· We strongly recommend draining condensed water directly into your drainage system instead of draining to the built-in water tank.
· Use the provided accessory hose (long drain hose) to drain condensed water directly to your drain system instead of draining to the built-in water tank (which is a default method).
· Use the built-in water tank only if you cannot drain the condensed water directly to a drainage system.
NOTE
As a factory default, this dryer is set to use the built-in water tank to drain condensed water.

30 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 30

2023/6/29 15:27:58

English

9
01 70 mm

1. Remove the water tank drain hose from the drain water outlet (A), and then insert it to the holder (B).
2. Insert one end of the accessory hose (long drain hose) into the drain water outlet (A).
3. Place the other end (outlet) of the accessory hose at least 70 mm away from a drain hole.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 31

English31
2023/6/29 15:27:58

English

Installation
Over a laundry sink:

A

B

BC C
D
E

1. Make sure to place the end of the accessory hose no more than 3 ft. (90 cm) above the bottom of the dryer.
2. To bend the accessory hose so that it hooks over the edge of the sink, use the supplied plastic hose guide (B) and secure the guide to the wall with a hook or to the tap with a piece of string. Assemble the drain hose (A) and the hose guide (B) and fix them with the cable tie (C).
CAUTION Do not extend the drain hose by connecting another hose to it. Water can leak from the connected area. If you need more length, use a longer drain hose.
ln a standpipe or laundry tub The laundry tub (B) or standpipe (C) must be no higher than 35.4 in. (90 cm). Make sure the drain hose and the standpipe are not airtight.
NOTE D: Hose retainer / E: Tie straps

• A

CAUTION
· Connect the hose guide (A) within 6 in. (15 cm)* of the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the dryer.
· The drain hose can be installed up to 35.4 in. (90 cm) high, but the draining capability can be reduced at the maximum height. Too much water remaining in the dryer may cause malfunction.

32 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 32

2023/6/29 15:27:58

English

Wall standpipe drain system

The drain hose can be placed into a wall standpipe drain

A

system. To keep the end of the drain hose bent, use the

supplied hose guide (A). Secure the guide to the wall

using a hook to ensure stable drainage.

By using the drain pipe of the laundry sink:

1. Assemble the hose connector (A), and attach it to the end of the accessory hose as shown.

A

CAUTION

To prevent water leaks, make sure to connect the hose

and the connector firmly.

2. Connect the hose adaptor directly to the drain pipe of the laundry sink.

CAUTION
· Place the other end (outlet) of the accessory hose about 70 mm away from a drain hole. Do not insert the end (outlet) of the accessory hose into a sewer. – A sewer smell may flow into the dryer.
· Wring out excess water from items before putting them in the dryer. – Wet items may cause an unpleasant smell inside the dryer.
· Open the dryer door and the heat exchanger cover after completing a drying cycle to maintain the dryer interior more hygienically.
· Run the Self Dry cycle if there is an unpleasant smell inside the dryer.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 33

English33
2023/6/29 15:27:59

English

Installation
Draining to the water tank
9

1. Remove the long drain hose from the drain water outlet (A). * 70 mm NOTE
Completely dry the removed long drain hose and keep it in a safe place for later use.
2. Remove the water tank drain hose from the holder (B), and then connect it to the drain water outlet (A). – Firmly connect the water tank drain hose so that it does not move around.

34 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 34

2023/6/29 15:27:59

English

Installation checklist
· The dryer is plugged into a properly grounded outlet. · All packaging material is completely removed and properly disposed. · The dryer is level and standing firmly on the floor. · The long drain hose is installed if you want water captured by the drying process drained automatically. · Start the dryer to make sure that it runs, heats, and shuts off. · Run a TIME DRY cycle for 20 minutes to see if the HC information code is displayed. If this is the case,
contact a local service center. · After installation, we recommend that you wait at least 1 hour before using the dryer.
Before using the dryer
· Make sure no accessory remains inside the drum. · Plug in the power cord just before operating the dryer. · Do not block the air inlet hole of the cooling grill at the front of the dryer. · Do not place flammable objects near the dryer and keep the surrounding area clean. · Keep the dryer level with the ground. · Do not remove the adjustable leveling feet of the dryer. They are necessary to keep the dryer level.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 35

English35
2023/6/29 15:27:59

English

Installation
Exhaust ducting guide (Not applicable to ventless (heat pump) models)
Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping
screws. 3. To facilitate the exhaust, keep the ducts as straight as possible.
Cleaning Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely. We recommend that you clean the exhaust system annually or on a regular basis.
WARNING · To prevent fire, do not use plastic, thin-foil, or non-metal flexible ducts of any kind. · Do not use a poor exhaust system because it slows down the dryer’s performance. · Do not use excessively long ducts that have multiple elbows. · Do not use crushed or clogged venting or ducts.
Door reversal
CAUTION · Unplug the power cord before you reverse the door. · Put a soft rug on the floor to place the door when you remove it. This will prevent the door from being
scratched.
1. Remove the door glass gasket.

36 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 36

2023/6/29 15:28:00

English

2. Remove the six screws fastening the door glass at the inner side of the door. – Remove the bottom three screws first.
3. Disassemble the door glass. CAUTION
Be careful not to drop it during disassembling. · You may damage the parts, and broken glass parts
may lead to injury.
4. Remove the two screws fastening the door to disassemble the door. – Use an Allen Wrench to prevent the screws from wearing out. NOTE
There is a screw on the back side of the hinge that will support the door as you unscrew the hinge screws.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 37

English37
2023/6/29 15:28:00

English

Installation

5. Remove the two screws that are above and below the cut-out in the front frame.
6. Remove the two screws above and below the lever holder on the opposite side of the door opening.
7. Remove the two screws that hold the lever holder in place, and then remove the lever holder.
8. Re-insert the two screws that held the lever holder into the same screw holes, and then tighten.

38 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 38

2023/6/29 15:28:01

English

9. Remove the single screw from the back of the door hinge. NOTE
This is the screw that supports the door against the frame so you can unscrew or screw in the hinge without needing to support the door yourself.
10. Insert the screw you just removed into the other screw hole on the back of the door hinge, and then tighten.
11. Place the door on the other side, and then reattach it to the dryer. NOTE
Insert the head of the screw on the back of the hinge into the hole above the cut-out in the frame, and then slide the door hinge down until it stops. Make sure the protrusion on the back of the hinge is pressed into the cut-out before you tighten the hinge screws. 12. Push the lever holder into the cut- out on the other
side of the door opening. Insert screws, and then tighten as shown.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 39

English39
2023/6/29 15:28:01

English

Installation

13. Re-attach the remaining screws to the remaining holes above and below the lever holder, and then tighten.
14. Attach the door on the opposite side and put the door glass back in its place.
15. Fasten the door glass with the six screws. NOTE
Firmly hold the door glass to prevent from dropping it while you fasten it with the screws.

16. Assemble the door glass gasket back onto its place.

40 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 40

2023/6/29 15:28:02

English

Before you start

Here are a few things you should know before starting your dryer.

Initial setup
· When you turn on your dryer for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it.
· If you complete the initial setup and operate a cycle for more than a minute, the initial setup will not appear again.
· The initial setup includes language selection and a brief tutorial. · When tapping a button, tap exactly over the text. · Operating the washer and dryer at the same time may result in a loss of power depending on where
they are installed and your electrical power status.

01 Language selection

02 Welcome screen

English Español
Turn dial & Tap OK
03 Tutorial

Welcome!

Let’s explore your new dryer!
[Tap OK to skip]

A dryer that knows you!
All Done!

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 41

English41
2023/6/29 15:28:02

English

Before you start

Sort and load
· Put one wash load in the dryer at a time. · Do not mix heavy and lightweight items. · To improve drying efficiency for one or two items, add a dry towel to the load. · For best results, untangle items before inserting them into the dryer. Tangled items may degrade the
drying efficiency or cause the door to open. · Overloading reduces the tumbling action, resulting in uneven drying and wrinkling. · Unless recommended on the care label, do not dry woolens or fiberglass items. · Avoid drying unwashed items. · Do not dry items soiled with oil, alcohol, gasoline, etc.
Functional prerequisite

Lint filter

To prevent a risk of fire, make sure to clean the lint filter

before or after every load.

A

1. Turn off the dryer.

2. Open the door and pull out the lint filter (A) from

inside the drum.

3. Open the lint filter by separating it at the top. Remove the lint, and then clean the lint filter.

4. Close the lint filter, reinsert the lint filter into the

dryer, and then close the dryer door.

CAUTION

· Do not operate the dryer without the lint filter in place.
· Do not use a damaged or broken lint filter. This may reduce performance and/or cause a fire.

42 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 42

2023/6/29 15:28:02

Operations
WARNING To reduce the risk of fire, electric shock, or injury, read the “Safety information” before operating this appliance.
Control panel

English

04

10

02

01

03

05

06

07

08

09

01 Power
02 Navigation dial 03 Start/Pause 04 Display 05 OK
06 Dryness

Tap to turn the dryer on or off. · If you do not manipulate the control panel for 10 minutes after the dryer is
turned on, the dryer automatically turns off. · The dryer automatically turns off when the drying completes.
CAUTION
Do not tap to turn the dryer off while the drying is in progress. Tap and hold to pause the cycle first, and then tap to turn the dryer off.
Turn the Navigation dial left or right to navigate through cycles and functions. When you turn the Navigation dial, the display shows your selection (such as cycle, additional features, and settings).
Tap and hold to start or pause an operation.
The display shows the current cycle, estimated time remaining, cycle options, and other useful or alert messages.
Tap to confirm your selection of function or setting.
Tap to change the dry level for the selected cycle. You can select from levels 1 to 4, but the available level depends on the selected cycle. · 4: Suitable for large and thick items. · 3: Standard drying level. · 2: The Damp dry level is designed to partially dry items. Use for items that lay
flat or hang to dry. · 1: Gently dries items to protect the fabric. Suitable for delicate items or items
you want to naturally dry (by hanging or laying flat on a drying rack) while they are damp.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 43

English43
2023/6/29 15:28:03

English

Operations

07 Temp. 08 Time 09 Options 10 Smart Control

Temperature can only be adjusted in Time Dry cycle. Tap to change the temperature of the current cycle.
Tap to select the cycle time for Time Dry, Air Fluff or Self Dry. You can set the drying time between 20 minutes and 240 minutes. Available drying time depends on the selected cycle.
· Tap to enter the Options menu. · Tap and hold for 3 seconds to enter the Settings menu.
After connecting the Tumble Dryer to your home network using the SmartThings app, you can control the dryer remotely. When started, the Smart Control indicator turns on. The dryer enters waiting mode and waits for remote commands.

Icon description
Wi-Fi Smart Control Child Lock

This icon indicates that the dryer is connected to Wi-Fi.
This icon indicates that Smart Control is on. For more information on “Smart Control”, see page 53. This icon indicates that Child Lock is on. For more information on “Child Lock”, see page 50.

44 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 44

2023/6/29 15:28:03

English

Operating a cycle
02

01

06

05

03

04

1. Tap to turn on the dryer. 2. Turn the Navigation dial to select the cycle you want. For more information on “Cycle overview”, see
page 46. 3. Tap Dryness, Temp., or Time to change the default cycle settings. 4. Tap Options, and then turn the Navigation dial to select an option. For more information on “Options”,
see page 48. 5. Tap OK to change the settings for the selected option. Some cycles may not have an available option. 6. Tap and hold to start the operation. Once you set the cycle you want, the screen displays a brief
cycle description, and cycle time. You can also check the cycle progress, remaining cycle time, and information codes.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 45

English45
2023/6/29 15:28:03

English

Operations

Cycle overview

NOTE
Other cycles can be used after adding them to your cycle list using the My Cycles function. For more information, see the “My Cycles” section on page 49.

Cycle Normal AI Optimal Dry
Time Dry
Super Speed Delicates Sanitize Towels Bedding Air Bedding Care Activewear Denim Shirts Blouses Wool Perm Press Iron Dry

Description
For most fabrics including cotton and linens.
Auto-optimized drying by AI according to the load and ambient temperature.
Use to set a desired dry time. Turn the Navigation dial to select Time Dry and tap Time to set the drying time between 20 minutes and 240 minutes. Tap Time repeatedly to select the available time options in this order: 20 / 30 / 40 / 50 / 60 / 90 / 120 / 150 / 180 / 240.
NOTE If you use this cycle for additional drying after finishing one of the Sensor Dry cycles, set the minimum drying time (20 minutes). Excessive drying may cause damage or deform to an item.
For mixed loads consisting of cotton and synthetic fabrics.
For the delicate items to be handled with care such as lingerie.
For sanitizing wet and dry clothes to eliminate bacteria.
Use to dry loads such as bath towels.
For bulky items such as blankets, sheets, comforters, and light duvets.
For dusting off clothes, bedspreads, bed sheets, and bedding covers, etc.
For exercise wear and outdoor wear such as sports jerseys, training pants, and other performance clothing.
For drying items made out of denim, such as jeans.
Use to quickly dry a few items such as a shirt.
For blouses made of polyester (Diolen, Trevira), polyamide (Perlon, nylon), or other similar blends.
For machine washable and tumble dryable wool only. For best results, turn laundry inside out before drying.
Dry wrinkle-free cotton, synthetic fabrics, knits, and permanent press fabrics automatically.
This cycle finishes the drying process in a moist state, which facilitates ironing.

46 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 46

2023/6/29 15:28:04

English

Cycle Eco Normal
Air Fluff
Down Jacket Care Outdoor Care Self Dry

Description
For reducing energy usage. This cycle adjusts the cycle time and temperature for increased efficiency.
For freshening up or airing items of laundry that have not been worn for long. Turn the Navigation dial to select Air Fluff and tap Time to set the drying time between 20 minutes and 240 minutes. Tap Time repeatedly to select the available time options in this order: 20 / 30 / 40 / 50 / 60 / 90 / 120 / 150 / 180 / 240.
For fluffing up a down jacket.
For restoring the water repellent properties of outdoor wear treated with water repellent agents such as skiwear and mountain clothing.
For efficiency and hygiene, remove all items from inside of the dryer and run the self drying cycle.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 47

English47
2023/6/29 15:28:04

English

Operations
Options
Using Options
02

03

01

1. Tap Options. 2. Turn the Navigation dial to select the desired option. 3. Tap OK to change the selected option’s settings.
NOTE
· To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK. · If the selected option is not supported, the “Currently not supported” message is displayed, and the OK
button is not activated. · When you select an option, a brief help message appears for the first ten times of use. · If you do not manipulate the control panel for 7 seconds after entering the Options menu, the display
returns to the main screen.
Wrinkle Prevent Reduces wrinkles by rotating the drum intermittently after completing the dry cycle. Wrinkle Prevent provides approximately 180 minutes. The load is dry and can be removed at any time during the Wrinkle Prevent cycle. 1. Tap Options. 2. Turn the Navigation dial to select Wrinkle Prevent, and then tap OK. 3. Tap OK to select On or Off.

48 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 48

2023/6/29 15:28:04

English

Damp Alert This option alerts you when shirts and other items that require ironing are dry enough to be suitable for ironing. 1. Select a cycle and change the cycle settings as necessary.
– This option is available for Normal, AI Optimal Dry, Super Speed, Delicates, Activewear, Denim, Shirts, Blouses, Perm Press, and Eco Normal with Dryness set to 2-5.
2. Tap Options. 3. Turn the Navigation dial to select Damp Alert, and then tap OK. 4. Tap OK to select On or Off.
Optional filter If you installed the Optional Filter to prevent dust accumulation on the heat exchanger, use this setting to set the filter cleaning alert on or off. 1. Tap Options. 2. Turn the Navigation dial to select Optional filter, and then tap OK 3. Tap OK to select On or Off.
– Select On to receive a filter cleaning alert message.
NOTE If the “Remove optional filter to clean”, “Clean heat exchanger & tap OK” or “Clean heat exchanger optional filter & tap OK” message appears on the display, clean both the heat exchanger and the Optional Filter. (Refer to the “Heat exchanger” section on page 63 and the “Micro soft filter (Optional Filter)” section on page 65.)
My Cycles Add or remove cycles to create a personal cycle list. 1. Tap Options. 2. Turn the Navigation dial to select My Cycles, and then tap OK.
– You can only edit a cycle to create a personal cycle when the dryer is not operating. 3. Turn the Navigation dial to select the desired cycle. 4. Tap OK to add or remove the selected cycle.
– The addition and removal of a cycle are saved automatically. 5. Tap Options or select Back to finish My Cycles setting.
NOTE
The Normal cycle cannot be removed from the cycles list.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 49

English49
2023/6/29 15:28:04

English

Operations
Drum Light You can turn the drum light on or off. 1. Tap Options. 2. Turn the Navigation dial to select Drum Light, and then tap OK. 3. Tap OK to select On or Off.
– The drum light turns on even when the dryer is off. (If the dryer is plugged into a power outlet.) – When the dryer door opens, the drum light automatically turns on and automatically turns off after
2 minutes.
Child Lock To prevent children or infants from accidentally starting or setting the dryer, Child Lock locks all buttons except for and Options. 1. Close the door. 2. Tap Options. 3. Turn the Navigation dial to select Child Lock, and then tap OK. 4. Tap OK to select On or Off.
– The Child Lock icon turns on when the option is on. – You cannot turn on Child Lock with the door open. If you get the “Close the dryer door and try again”
message on the display while you try to turn on Child Lock, close the door and try again.
NOTE · When Child Lock is on, all buttons are disabled except for and Options. · If you tap a button with Child Lock on, an alarm triggers with the “Child Lock on” message. · If you open and close the door with Child Lock on, an alarm triggers with the “Open door & check inside”
and “Child Lock on” message. · To dismiss a notification message, turn off Child Lock or the power.

50 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 50

2023/6/29 15:28:04

English

Settings
Using Settings
02

03

01 *

1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial and select the desired setting, and then tap OK. 3. Tap OK to change the settings or start the function.

• Tap and hold 3 seconds.

NOTE

· To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK. · If you do not manipulate the control panel for 7 seconds after entering the Settings menu, the display
returns to the main screen.

AI Pattern This function saves your frequently used cycles and settings. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select AI Pattern, and then tap OK. 3. Tap OK to select On or Off.
– The default setting is On. Set it to Off if you do not want to use this function. – When you turn the function on, the dryer remembers frequently used cycles and their settings
(Dryness, Time) and saves them in frequently used order. – When you turn off the function, all the saved data reset.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 51

English51
2023/6/29 15:28:04

English

Operations
Sound You can turn on or off the sound from the dryer. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select Sound, and then tap OK. 3. Tap OK to select On or Off.
– The default setting is On. NOTE The setting remains unchanged even if you restart the dryer.
Wi-Fi You can turn the dryer’s Wi-Fi on or off. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select Wi-Fi, and then tap OK. 3. Tap OK to select On or Off.
– The dryer’s Wi-Fi is off as a factory default setting. However, the dryer’s Wi-Fi turns on automatically when you turn on the dryer for the first time. Then, the final Wi-Fi setting maintains regardless of the dryer power status.
– Once you turn on the dryer’s Wi-Fi and connect to a network, the dryer remains connected to the network even when you turn off the power.
– The Wi-Fi indicates that the dryer is connected to the router through the Wi-Fi connection.
Language You can change the system language. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select Language, and then tap OK. 3. Turn the Navigation dial to select the desired language, and then tap OK.
Calibration You can run the calibration again for accurate weight detection.

1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select Calibration, and then tap OK.
   – Calibration does not start if the door is not closed properly. – The drum rotates clockwise and counterclockwise for about 3 minutes. 3. When calibration is complete, the “Calibration complete” message appears on the display and the dryer turns off automatically.
   Factory Reset You can reset your dryer. 1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Factory Reset, and then tap OK.
   – Your dryer resets to the factory setting.
   52 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 52

2023/6/29 15:28:05

English

Special features
Smart Control You can connect to the SmartThings app and control your dryer remotely.
Connecting your dryer · Download and open the SmartThings app on your mobile device · Tap to turn on the dryer. · Tap and hold Smart Control on the dryer.
a. The dryer enters AP mode and connects to your mobile device. b. Tap Smart Control to authenticate your dryer on your mobile device. c. Once the authentication process is complete, your dryer is successfully connected to the app. Use
various features available in the SmartThings app.
NOTE
· If your dryer fails to connect with the SmartThings app, try again. · Check your router if you experience any Internet connection problems after connecting your dryer with
the SmartThings app. · If the Wi-Fi is off, tap and hold Options for 3 seconds to navigate to Settings, select Wi-Fi, and tap OK to
turn it on. · Turning the dryer’s Wi-Fi on allows you to connect to the dryer via the SmartThings app on your
smartphone regardless of the power status of the dryer. However, the dryer appears offline on the SmartThings app if the dryer’s Wi-Fi is off. · Close the door before starting the Smart Control function. · If you use the dryer 20 times without being connected to SmartThings, the next time you turn the dryer on, a pop-up about Smart Control connection will appear for 3 seconds. · If the dryer’s Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn off the power.
Stay Connect Set up the Stay Connect function in your SmartThings app. Your dryer stays connected to the app so you can use the dryer when you are away from home. 1. If you turn on the Stay Connect function on the SmartThings app, the dryer will stay in standby power-
saving mode after completing a cycle. – The Stay Connect function will remain active for up to 24 hours if the door remains closed. 2. When the Stay Connect function is active, the Smart Control and Wi-Fi icons appear on your dryer display. 3. Conveniently control your dryer using the SmartThings app
NOTE
The dryer switches to standby power-saving mode when the operation is paused even if the machine is not connected to the SmartThings app.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 53

English53
2023/6/29 15:28:05

English

Operations
SmartThings
Wi-Fi connection On your smartphone, go to Settings and turn on the wireless connection and select an AP (Access Point). · This appliance supports the Wi- Fi 2.4 GHz protocols.
Download On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), find the SmartThings app by searching for “SmartThings”. Download and install the app on your device.
NOTE The app is subject to change without notice for improved performance. In addition, further updates on the app or the function in the app may stop due to usability and security reasons, even if updates are currently supported on your OS.
Log in You must first log in to SmartThings with your Samsung account. To create a new Samsung account, follow the instructions on the app. You don’t need a separate app to create your account.
NOTE If you have a Samsung account, use the account to log in. A registered Samsung smartphone user automatically logs in.
To register your appliance to SmartThings 1. Make sure your smartphone is connected to a wireless network. If not, go to Settings and turn on the
wireless connection and select an AP (Access Point). 2. Open SmartThings on your smartphone. 3. If you see the message “A new device is found.”, select Add. 4. If no message appears, select + and select your appliance in a list of devices available. If your appliance
is not listed, select Device Type > Specific Device Model, and then add your appliance manually. 5. Register your appliance to the SmartThings app as follows.
a. Add your appliance to SmartThings. Make sure your appliance is connected to SmartThings. b. When registration is complete, your appliance appears on your smartphone.

54 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 54

2023/6/29 15:28:05

English

Cycle chart

NOTE
For best results, follow the load size recommendations for each dry cycle. · Large load: Fill the drum to about 3/4 full. Do not add items over this level as they need to tumble
freely. · Medium load: Fill the drum to about 1/2 full. · Small load: Fill the drum with 3-5 items, not more than 1/4 full.

Cycle Normal AI Optimal Dry Time Dry Super Speed Delicates Sanitize Towels Bedding Air Bedding Care Activewear Denim Shirts Blouses
Wool Perm Press
Iron Dry Eco Normal
Air Fluff Down Jacket Care
Outdoor Care Self Dry

Recommended items Cotton, mixed loads of cotton and synthetic fabrics Cotton, mixed loads of cotton and synthetic fabrics
Any load Synthetic fabrics Underwear, lingerie Cotton and linen fabrics Bath towels and similar items Blankets, sheets, comforters, pillows Blankets, sheets, comforters, pillows Exercise wear, sports jerseys
Jeans, denim Shirts Blouses
Machine washable wool Wrinkle-free cotton, synthetic fabrics
Cotton and linen fabrics Cotton, mixed loads of cotton and synthetic fabrics
All types of fabric Down-filled jacket Water-repellent wear
–

Load size –

Dry level Level 3 (Adjustable) Level 3 (Adjustable)
Level 3 (Adjustable) Level 2 (Adjustable) Level 4 (Not Adjustable) Level 3 (Adjustable) Level 3 (Adjustable)
Level 2 (Adjustable) Level 2 (Adjustable) Level 3 (Adjustable) Level 2 (Adjustable) Level 1 (Not Adjustable) Level 2 (Adjustable) Level 1 (Not Adjustable) Level 3 (Adjustable)
–

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 55

English55
2023/6/29 15:28:06

English

Operations

NOTE : factory setting, : can be selected

Cycle
Normal AI Optimal Dry
Time Dry Super Speed
Delicates Sanitize Towels Bedding Air Bedding Care Activewear Denim Shirts Blouses
Wool Perm Press
Iron Dry Eco Normal
Air Fluff Down Jacekt Care
Outdoor Care Self Dry

Functions (Temp. Control)
Level 3 Level 3 Level 4 (Adjustable) Level 4 Level 1 Level 4 Level 4 Level 4 Level 3 Level 2 Level 3 Level 3 Level 2 Level 1 Level 2 Level 3 Level 2
Level 3 Level 3 Level 4

Time

Options

Damp Alert

Wrinkle Prevent

56 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 56

2023/6/29 15:28:06

English

Drying guide
The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference.

Items
Bedspreads & Comforters
Blankets
Curtains & Draperies
Cloth Diapers Down­filled Items (jackets, sleeping bags, comforters, etc.) Foam Rubber (rug backs, stuffed toys, shoulder pads, etc.)
Pillows
Plastics (shower curtains, outdoor furniture covers, etc.)

Description
Follow the care label instructions or dry using Bedding. · Make sure the item is thoroughly dry before using or storing. · May require repositioning in the drum to ensure even drying.
Use Normal and dry only one blanket at a time for best tumbling action. · Make sure blankets are thoroughly dry before using or storing.
Use Perm Press and the Low temperature setting to help minimize wrinkling. · Dry curtains and draperies in small loads for best results and remove
them as soon as possible after the cycle is complete.
Use Normal and the Medium temperature setting for soft, fluffy diapers.
Use Normal and the Medium temperature setting. · Add a couple of dry towels to absorb moisture and shorten drying
time.
Do not dry in a heat setting.
WARNING Drying a rubber item with heat may damage it or cause a fire.
Use Normal. · Add a couple of dry towels and a pair of clean sneakers to help the
tumbling action and to fluff the pillows. · Do not dry kapok or foam pillows using a heated drying cycle.
Use Time Dry and the Low temperature settings depending on the care label instructions.

WARNING
Do not dry: · Fiberglass items (curtains, draperies, etc.) · Woolens, unless recommended on the label · Items spotted or soaked with vegetable or cooking oils

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 57

English57
2023/6/29 15:28:06

English

Maintenance

Emptying the water tank
Empty the water tank after each use to prevent leaks.

9

1. Remove the water tank (A) from the dryer. – Pull the water tank handle with one hand until the tank is halfway out. – Once the water tank is halfway out, support the bottom of the tank with the other hand and pull it slowly with both hands.
CAUTION
· The water tank is heavy. Slowly remove the water tank using both hands while keeping the tank at a level.
· Be careful when removing the full water tank. It is very heavy and can cause injury if you drop it.
2. Empty the water through the drain hole (B), and then clean inside the water tank. – Mix some neutral detergent in lukewarm water. Fill the water tank with the mixture through the drain hole (B) and leave it for 30 minutes. Then, rinse the tank with clean water and completely dry it.
3. Place the water tank back into place.

NOTE
If the dryer displays the “Empty the tank” message and stops while drying is in progress, empty the water tank and tap and hold . The “Empty the tank” message will disappear, and the dryer will resume drying.

58 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 58

2023/6/29 15:28:06

English

Installing the micro soft filter (Optional Filter)
You can install the provided micro soft filter (Optional Filter) to prevent dust accumulation on the heat exchanger.

1. Gently press the top part of the outer cover (A) to

open.

2. Unlock the inner cover fixers (B), and then pull the inner cover to remove.
9
9
3. Insert the provided micro soft filter (Optional Filter) (C) on the back of the inner cover as shown in the
A figure. – Make sure to install the filter in the correct position. (The tap on the top of the filter should face outward.)

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 59

English59
2023/6/29 15:28:07

Maintenance

4. Reinsert the inner cover to its original position, and then lock the fixers.
5. Close the heat exchanger’s outer cover.

English

Cleaning
WARNING · Do not clean the dryer by directly spraying water onto the dryer. · Do not clean the dryer with benzene, thinner, alcohol, or acetone. This may cause discoloration,
deformation, damage, electric shock, or fire. · Before cleaning the dryer, be sure to unplug the power cord.
Exterior Clean with a soft, damp cloth. Do not use abrasive cleaners. Avoid using or placing sharp or heavy objects near/on the dryer. Keep detergent and laundry supplies on the pedestal (sold separately) or in a separate storage container.
Control panel Clean with a soft, damp cloth. Do not use abrasive cleaners. Do not spray cleaners directly on the panel. Immediately wipe up any spills or liquids from the control panel.
Drum Clean with a damp cloth with a mild, non-abrasive cleaner suitable for stainless steel. Wipe the remaining residue with a clean, dry cloth.
Door Foreign substances can contaminate or build up on the inside of the door. Clean the inside of the door using a soft piece of cloth or brush.
CAUTION Do not detach the door’s rubber sealing.

60 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 60

2023/6/29 15:28:07

English

Lint filter Clean the lint filter after each use.

1. Open the dryer door, grab the top of the lint filter, and pull to remove the filter. – Do not detach the rubber sealing after removing the filter.

2. Open the outer filter and remove the inner filter (A).
A

3. Spread open the outer filter and the inner filter. 4. Remove the lint from both filters, and then clean the
filters with the cleaning brush.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 61

English61
2023/6/29 15:28:07

English

Maintenance

NOTE To clean the filters thoroughly, clean the filters in running water, and then dry them completely.
5. Put the inner filter into the outer filter, and then reinsert the lint filter into the original position.

CAUTION
· Clean the lint filter after each load. Otherwise, the drying performance may decrease. · If the filter surface is wet, allow it to completely dry before use.
– Inserting the filter while it is wet can cause mold and/or odor to form and/or result in less drying. · When cleaning or removing the lint filter, do not shake or tap on the filter. Doing so can damage the
filter. · Opening the outer and inner filters carelessly and with excessive force can damage the filters.

62 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 62

2023/6/29 15:28:07

English

Heat exchanger When it is time to clean the heat exchanger, the dryer will alert you by displaying the “Clean heat exchanger & tap OK” or “Clean heat exchanger optional filter & tap OK” message. A dirty heat exchanger will hinder the product’s performance and should be cleaned regularly.
NOTE
· Water droplets can form around the heat exchanger due to condensation caused by a temperature difference. This is normal and is not a sign of a leak.
· If you are not planning on using the dryer for a long period, open the heat exchanger cover and ventilate.

1. Gently press the top part of the outer cover (A) to

open.

2. Unlock the inner cover fixers (B), and then pull the inner cover to remove.
9
9

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 63

English63
2023/6/29 15:28:08

English

Maintenance

3. Clean the dust on the heat exchanger using the provided brush. – After cleaning with the brush, wipe off the remaining dust using a smooth, damp cloth.
CAUTION
· To avoid physical injury and burns, do not touch or clean the heat exchanger with bare hands.
· When cleaning the heat exchanger, be careful not to damage the fins.
NOTE
If the heat exchanger is completely dry and therefore hard to clean, spray some water on the heat exchanger and clean using a brush.
4. Clean the inner cover with a smooth, damp cloth. – There may be moisture and/or foreign substances around the inner cover.

5. Reinsert the inner cover to its original position, and then lock the fixers.
6. Close the heat exchanger’s outer cover.

NOTE
· After cleaning the heat exchanger, tap OK to dismiss the notification message. The message remains on until you dismiss it.
· If the alarm continues after you have dismissed it, unplug and then plug in the power cord or remove and reinsert the heat exchanger’s inner cover.

64 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 64

2023/6/29 15:28:08

English

Micro soft filter (Optional Filter) When it is time to clean the Micro soft filter (Optional Filter), the dryer will alert you by displaying the “Clean Micro soft filter (Optional Filter)” message. A dirty Micro soft filter (Optional Filter) will hinder the product’s performance and should be cleaned regularly.
1. Open the heat exchanger’s outer cover, and then remove the inner cover. (Refer to the “Heat exchanger” section on page 63.)
2. Remove the Micro soft filter (Optional Filter) from the inner cover.
3. Clean the dust on the Micro soft filter (Optional Filter) with the provided brush, and then wash the filter in running water. – Completely dry the filter after a wash. – Clean the filter regularly. A dirty filter can degrade a drying performance.
4. Insert the filter into the inner cover, and then insert the inner cover back to its place. – Make sure into install the filter in the correct position. (The tap on the top of the filter should face outward.)

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 65

English65
2023/6/29 15:28:08

English

Troubleshooting

Checkpoints

If you encounter a problem with the dryer, first check the table below and try the suggestions.

Problem

Action

Dryer does not start.

· Make sure the dryer is plugged in. · Make sure the door is properly closed. · Check the fuse or reset the circuit breaker. · If you opened the door during a cycle, tap and hold · Clean the filter. · Make sure Child Lock is not activated.

again.

The dryer does not warm up.

· Check the fuse or reset the circuit breaker. · Check the lint filter and the heat exchanger. Clean them if necessary. · The dryer may be in the cooling down process of the cycle.

Items are not dried.

Check all of the above. Additionally:
· Do not overload the dryer. If the dryer is overloaded, it could take longer for items to dry.
· Dry heavy fabrics separately from light fabrics. · The item(s) are too small and may not get enough spinning inside the
drum. · Clean the filter. · Clean the heat exchanger. · If the “Clean heat exchanger & tap OK” or “Clean heat exchanger
optional filter & tap OK” message appears on the display, refer to the “Heat exchanger” section on page 63 and clean the heat exchanger. · If a drain hose is connected, make sure water is draining properly.

The dryer is too loud.

· Look for coins, loose buttons, nails, and other objects and remove them immediately.
· Check the lint filter. Remove any items stuck inside the lint filter. · Make sure the dryer is level and standing firmly on the floor. · The dryer may hum due to air moving through the drum and fan. This is
normal.

· Seams, pockets, and other parts of clothing are harder to dry than Items are not dried evenly. others. This is normal.
· Sort heavy and light items separately.

66 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 66

2023/6/29 15:28:08

English

Problem
There is a smell coming from the dryer.
The dryer turns off before the items are dry.
The clothes have lint on them.
Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release). Extended time.
The ambient temperature around the dryer rises or there is a damp, soggy smell.
Water is not draining.

Action
· The smell of paint, varnish, cleaning agents, and other household items could have circulated in the air and entered the dryer. If you notice such a smell, ventilate completely before using the dryer.
· If drying in an enclosed area, the dryer could cause the ambient temperature to rise. Accordingly, make sure to open a window and ventilate the area.
· Do not attempt to dry wet items after leaving them in the washing machine or dryer for a long time.
· The load is too small. Throw in few additional items like towels and try drying again.
· Always make sure the lint filter is clean before putting items into the dryer. When drying items that generate a large amount of lint, you may need to clean the lint filter in the middle of a cycle.
· Some fabrics (such as white towels) causes more lint and should be dried separately from fabrics that lint attaches easily (such as black linen pants).
· Check the inside of the pockets to make sure they are empty before drying.
· Small loads of 1 to 4 items work best. · Load fewer items. Load similar-type items. · Take out the items immediately after drying is complete.
· Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference.
· Heat pump dryers circulate ambient air inside and outside the dryer during the drying process to cool the system. Using the dryer in a poorly ventilated area may, depending on the operating environment, raise the ambient humidity level and/or cause a damp, soggy smell to develop. Ensure proper ventilation when using the dryer.
· Check the draining hose for twists and kinks. Straighten out the hose if it is twisted or kinked and securely connect it to the drain on the floor.
· Check to see if the draining hose is frozen. If the hose is frozen, submerge it in warm water to allow the water inside the hose to melt and drain out. Reconnect the hose and check for proper draining.

If a problem persists, contact a local Samsung service center.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 67

English67
2023/6/29 15:28:08

English

Troubleshooting

Information codes
If the dryer fails to operate, you may see an information code on the display panel. To determine what you should do, check the list of codes in the table below, and then try the suggested actions.

Information code

Meaning

Action

Close the dryer door and try again

Operating the dryer with the door open.

· Make sure the door is properly closed. · Make sure laundry is not caught in the
door

Clean filter before use / Check filter is inserted correctly

Lint filter problem

· Check the lint filter assembly. · Clean the lint filter. · If this continues, call for service.

Check heat exchanger cover is inserted correctly

Internal heat exchanger cover problem

· Check the internal heat exchanger cover assembly.
· If this continues, call for service.

Check drainage / Check tank and drain hose / Check for leaks and restart / Empty
tank & hold

Draining malfunction Draining pump malfunction Frozen draining hose Water tank full

· Make sure the draining hose is not bent or damaged.
· If the hose is frozen, wrap the hose with a towel soaked in warm water for approximately ten minutes to thaw the hose.
· Empty the water tank, turn on the dryer, and start again.
· If this continues, call for service.

· Try restarting the cycle.

FC

Invalid power source frequency. · If this information code remains,

contact a Samsung service center.

· Check if power cord is connected

properly.

9C1

The electronic control needs to be · Check if the electrical outlet is working

checked.

properly.

· If the information code remains,

contact a Samsung service center.

dF

Incorrect door switch.

· Contact a Samsung service center.

· Clean the lint filter and the heat

tC

Air temperature sensor problem

exchanger.

· If this continues, call for service.

tC5

Compressor temperature sensor problem

· Wait two to three minutes. · Turn the power back on and start
again.

68 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 68

2023/6/29 15:28:08

English

Information code 3C
AC6 HC

Meaning
Check the motor for operation.
Check communications between the main and the inverter PBAs. Compressor overheating

Action
· Try restarting the cycle. · If this continues, call for service.
· Try restarting the cycle. · If this continues, call for service.
· Call for service.

If any information code keeps appearing on the display, contact a Samsung service center.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 69

English69
2023/6/29 15:28:08

English

Specifications
Fabric care chart
The following symbols provide garment care direction. The clothing care labels include symbols for drying. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems. Tumble Dry Cycles
Dry Normal Permanent Press Delicate/Gentle Do Not Dry (Used with Do Not Wash) Do Not Tumble Dry In the Shade (Added to Line Dry, Drip Dry or Dry Flat) Line Dry/ Hang to Dry Drip Dry Dry Flat
Tumble Dry Heat Setting Any Heat High Medium Low No Heat/ Air

70 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 70

2023/6/29 15:28:10

English

Protecting the environment
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.

Specification sheet

Type Capacity (Cu.ft) Water pressure (psi (kPa)) Weight (lb (kg)) Power consumption (W) Allowable temperature

Front loading dryer 7.8
20-116 (137-800) 192 (78) 2750 5-35 °C

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 71

English71
2023/6/29 15:28:10

LIMITED WARRANTY (U.S.A.)
SAMSUNG DRYER
LIMITED WARRANTY TO ORIGINAL CONSUMER PURCHASER WITH PROOF OF PURCHASE AND/ OR PROOF OF DELIVERY
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials or workmanship for the following limited warranty periods, starting on the date of delivery to the original consumer purchaser:
One (1) Year All Parts and Labor
This limited warranty is valid only on products purchased and used in the United States that have been installed, operated, and maintained according to the instructions attached to or furnished with the product. To receive warranty service, the purchaser must contact SAMSUNG at the address or phone number provided below for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale and/or proof of delivery must be presented upon request to SAMSUNG or SAMSUNG’s authorized service center to receive warranty service.
SAMSUNG will provide in-home service within the contiguous United States during the warranty period at no charge, subject to availability of SAMSUNG authorized servicers within the customer’s geographic area. If in-home service is not available, SAMSUNG may elect, at its option, to provide transportation of the product to and from an authorized service center. If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
To receive in-home service, product must be unobstructed and accessible to the service agent.
During the applicable warranty period, a product will be repaired, replaced, or the purchase price refunded, at the sole option of SAMSUNG. SAMSUNG may use new or reconditioned parts in repairing a product, or replace the product with a new or reconditioned product. Replacement parts and products are warranted for the remaining portion of the original product’s warranty or ninety (90) days, whichever is longer. All replaced parts and products are the property of SAMSUNG and you must return them to SAMSUNG.
This limited warranty covers manufacturing defects in materials or workmanship encountered in normal household, noncommercial use of this product and shall not cover the following: damage that occurs in shipment, delivery, installation, and uses for which this product was not intended; damage caused by unauthorized modification or alteration of the product; product where the original factory serial numbers have been removed, defaced, changed in any way, or cannot be readily determined; cosmetic damage including scratches, dents, chips, and other damage to the product’s finishes; damage caused by abuse, misuse, pest infestations, accident, fire, floods, or other acts of nature or God; damage caused by use of equipment, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG; damage caused by incorrect electrical line current, voltage, fluctuations and surges; damage caused by failure to operate and maintain the product according to instructions; in-home instruction on how to use your product; and service to correct installation not in accordance with electrical or plumbing codes or correction of household electrical or plumbing (i.e., house wiring, fuses, or water inlet hoses). The cost of repair or replacement under these excluded circumstances shall be the customer’s responsibility.
72 English

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 72

2023/6/29 15:28:10

Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues.
EXCLUSION OF IMPLIED WARRANTIES IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.
LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY. SAMSUNG SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO TIME AWAY FROM WORK, HOTELS AND/OR RESTAURANT MEALS, REMODELING EXPENSES, LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.
SAMSUNG does not warrant uninterrupted or error-free operation of the product. No warranty or guarantee given by any other person, firm, or corporation with respect to this product shall be binding on SAMSUNG.
To obtain warranty service, please contact SAMSUNG at: Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com/us/support

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 73

English73
2023/6/29 15:28:10

Warranty (CANADA)
SAMSUNG DRYER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: · One (1) year part and labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the Canada.
To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the Canada. In- home service is not available in all areas.
To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

74 English
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 74

2023/6/29 15:28:10

EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG.
SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province.
To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French)
Visits by a Service Engineer to explain functions, maintenance, or installation is not covered by warranty. Please contact the Samsung call center at the number above for help with any of these issues.

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 75

English75
2023/6/29 15:28:10

Scan this with your smartphone
This product qualifies for ENERGY STAR in the factory default “Normal” setting. If you change the factory default setting or enable other features, power consumption could increase and exceed the limits qualified for ENERGY STAR.

QUESTIONS OR COMMENTS?

COUNTRY U.S.A

CALL 1-800-SAMSUNG (726-7864)

CANADA

1-800-SAMSUNG(726-7864)

OR VISIT US ONLINE AT www.samsung.com/us/support www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French)

DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 76

2023/6/29 15:28:11

Sèche-linge
Manuel d’utilisation
DV53BB8900**

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 1

2023/6/30 15:02:24

Français

Sommaire

Consignes de sécurité

4

Remarques importantes sur les consignes de sécurité

4

Symboles de sécurité importants

4

AVERTISSEMENT RELATIF À LA PROPOSITION 65 DE LA CALIFORNIE

7

Consignes de sécurité importantes

8

Avertissements

9

Mises en garde

9

Notification de réglementation

11

Avis concernant la FCC

11

Notification IC

12

Déclaration de logiciel open source

13

Conditions d’installation

14

Conditions d’installation principales

14

Choix de l’emplacement d’installation

14

Conditions requises en matière de conduits (non applicables aux modèles sans aération (pompe à chaleur)) 19

Conditions requises en matière d’évacuation (non applicables aux modèles sans aération (pompe à chaleur)) 20

Systèmes fonctionnant au gaz (non applicable aux modèles sans aération (pompe à chaleur))

21

Normes électriques

22

Installation

25

Ce qui est inclus

25

Installation étape par étape

27

Raccordement du tuyau d’évacuation

31

Liste de vérification pour l’installation

36

Avant d’utiliser le sèche-linge

36

Guide d’installation du conduit d’évacuation (non applicable aux modèles sans aération (pompe à chaleur)) 37

Inversion du hublot

37

Avant de démarrer

42

Configuration initiale

42

Tri et charge

43

Conditions de fonctionnement préalables

43

2 Français
DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 2

2023/6/30 15:02:24

Français

Opérations

44

Panneau de commande

44

Utilisation d’un cycle

46

Présentation des cycles

47

Options

49

Réglages

52

Fonctions spéciales

54

Tableau des cycles

56

Guide de séchage

58

Maintenance

60

Vider le réservoir d’eau

60

Installation du micro-filtre souple (filtre en option)

61

Nettoyage

62

Dépannage

68

Contrôles à effectuer

68

Codes d’erreur

70

Caractéristiques techniques

72

Tableau des symboles textiles

72

Protection de l’environnement

73

Fiche de spécifications

73

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 3

Français3
2023/6/30 15:02:24

Français

Consignes de sécurité
Félicitations pour l’achat de votre nouveau sèche-linge Samsung. Ce manuel contient de précieuses informations concernant l’installation, l’utilisation et l’entretien de votre appareil. Prenez le temps de le lire pour tirer pleinement profit de tous les avantages et de toutes les fonctionnalités de votre sèche-linge.
Remarques importantes sur les consignes de sécurité
Veuillez lire attentivement ce manuel afin d’utiliser cet appareil en toute sécurité et de profiter pleinement de toutes ses fonctionnalités. Conservez ce manuel dans un endroit sûr situé à proximité de l’appareil afin de pouvoir facilement vous y reporter en cas de besoin. N’utilisez pas cet appareil autrement que pour l’usage auquel il est destiné, conformément aux consignes du manuel. Les consignes de sécurité et les avertissements décrits dans ce manuel ne sont pas exhaustifs. Il est de votre responsabilité de faire preuve de bon sens, de prudence et de discernement lors de l’installation, de l’entretien ou de l’utilisation de votre sèche-linge. Ces consignes d’utilisation couvrant plusieurs modèles, il se peut que les caractéristiques de votre sèche-linge diffèrent légèrement de celles décrites dans ce manuel ; ainsi, certaines icônes d’avertissement peuvent ne pas s’appliquer à votre machine. Pour toute question, contactez votre centre de service le plus proche ou connectezvous sur www.samsung.com.
Symboles de sécurité importants
Signification des icônes et signes repris dans ce manuel d’utilisation : AVERTISSEMENT
Risques ou pratiques inadaptées susceptibles de causer des blessures graves, la mort et/ou des dommages matériels.
ATTENTION Risques ou pratiques inadaptées susceptibles de causer des blessures et/ou des dommages matériels.
REMARQUE Indique qu’il existe un risque de blessures ou de dommages matériels.
Ces symboles d’avertissement ont pour but d’éviter tout risque de blessure corporelle. Respectez-les en toutes circonstances. Lisez attentivement ce manuel et conservez-le en lieu sûr afin de pouvoir le consulter ultérieurement. Lisez attentivement toutes les consignes avant d’utiliser l’appareil. Comme avec tout équipement électrique ou comportant des parties mobiles, il existe un certain nombre de dangers potentiels. Pour utiliser cet appareil en toute sécurité, familiarisez-vous avec son fonctionnement et restez prudent lorsque vous l’employez.

CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
4 Français

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 4

2023/6/30 15:02:24

Français

AVERTISSEMENT – Risque d’incendie
· L’installation du sèche-linge doit être effectuée par un technicien qualifié. · L’installation du sèche-linge doit se faire conformément aux instructions
du fabricant et aux réglementations locales. · N’équipez jamais un sèche-linge de conduits de ventilation en plastique
flexible. Si vous utilisez un conduit en métal flexible (de type aluminium), celui-ci doit être conforme aux spécifications du fabricant et adapté à une utilisation sur sèche-linge. Les matériaux flexibles utilisés dans les systèmes d’évacuation de l’air ont tendance à se plier, à s’écraser et à retenir les peluches de tissu. Ces conditions empêchent une évacuation adéquate de l’air et augmentent les risques d’incendie. · N’installez pas de ventilateur secondaire dans le conduit d’evacuation. · Pour réduire les risques de blessure grave ou de décès, observez attentivement les consignes d’installation. · Conservez soigneusement ces instructions.

CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
Français5

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 5

2023/6/30 15:02:25

Français

Consignes de sécurité
AVERTISSEMENT – Pour réduire le risque d’incendie ou d’explosion : · Ne faites sécher aucun article ayant été précédemment en contact par nettoyage, lavage ou trempage avec de l’essence, des solvants de nettoyage à sec ou toute autre substance inflammable ou explosive. En effet, ceux-ci diffusent des vapeurs pouvant s’enflammer ou exploser. Ne placez aucun article entré en contact avec un solvant ou des matières solides ou liquides inflammables dans le sèche- linge, tant que toute trace de ces produits n’a pas été éliminée. De nombreux produits inflammables sont utilisés dans l’environnement domestique comme l’acétone, l’alcool dénaturé, l’essence, le kérosène, certains nettoyants ménagers sous forme liquide, certains détachants, la térébenthine, les cires et les produits décapants. · Ne faites jamais sécher à chaud les articles à base de caoutchouc mousse (également appelé mousse de latex) ou de matériaux dont la texture ressemble à celle du caoutchouc. En effet, les matières en caoutchouc mousse peuvent, dans certaines circonstances, s’enflammer spontanément.

CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
6 Français

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 6

2023/6/30 15:02:25

Français

AVERTISSEMENT – Risque d’incendie ou d’explosion · Si les avertissements de sécurité ne sont pas suivis à la lettre, des
blessures graves voire mortelles ou des dégâts matériels pourraient survenir. · N’entreposez et n’utilisez jamais d’essence ou d’autres vapeurs et liquides inflammables à proximité de cet appareil ou de tout autre. · L’installation et l’entretien doivent être effectués par un installateur qualifié, un réparateur agréé ou votre fournisseur de gaz. · N’installez pas de ventilateur secondaire dans le conduit d’évacuation.
AVERTISSEMENT – Que faire en cas d’émanation de gaz : · Ne tentez pas d’allumer un appareil électrique. · Ne mettez pas l’appareil sous tension. · Ne touchez à aucun interrupteur électrique. · N’utilisez aucun téléphone dans le bâtiment. · Faites évacuer tous les occupants de la pièce, du bâtiment ou du secteur. · Appelez immédiatement votre fournisseur de gaz depuis le téléphone
d’un voisin. Suivez les consignes que vous recevrez. · Si vous ne pouvez pas joindre votre fournisseur de gaz, appelez les
pompiers.
AVERTISSEMENT RELATIF À LA PROPOSITION 65 DE LA CALIFORNIE
AVERTISSEMENT
Risque de cancer ou de troubles de la reproduction – www.P65Warnings.ca.gov.
CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
Français7

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 7

2023/6/30 15:02:25

Français

Consignes de sécurité
Consignes de sécurité importantes
AVERTISSEMENT
Afin de réduire les risques d’incendie, d’électrocution ou de blessures physiques lors de l’utilisation de l’appareil, des précautions de base doivent être prises : 1. Lisez toutes les consignes de sécurité avant d’utiliser l’appareil. 2. Ne faites pas sécher de linge ayant été en contact par nettoyage, lavage ou trempage avec de l’essence, des
solvants de nettoyage à sec ou tout autre substance inflammable ou explosive ; ces produits dégagent en effet des vapeurs qui risqueraient de s’enflammer ou d’exploser. 3. N’utilisez pas le sèche-linge pour faire sécher des vêtements comportant des traces de substances inflammables telles que de l’huile végétale, de l’huile de cuisson, de l’huile de machine, des produits chimiques inflammables, des diluants, etc. ou des objets comportant des traces de cire ou de produits chimiques Ils risqueraient de prendre feu. 4. N’entreposez ni n’utilisez jamais d’essence ou d’autres produits inflammables à proximité de cet appareil ou de tout autre appareil. 5. Ne laissez pas les enfants jouer sur ou dans l’appareil. Une surveillance attentive s’impose lorsque l’appareil est utilisé à proximité d’enfants. 6. Avant la mise hors service ou au rebut de l’appareil, retirez le hublot du tambour. 7. Ne tentez pas d’ouvrir l’appareil lorsque le tambour est en mouvement. 8. N’installez et n’entreposez jamais cet appareil dans un endroit exposé aux intempéries. 9. N’utilisez pas les commandes internes du sèche-linge inutilement. 10. Ne procédez pas à la réparation ou au remplacement des pièces de l’appareil et ne tentez pas non plus de le réparer vous-même, sauf si le manuel d’entretien ou de service contient des recommandations spécifiques en la matière que vous comprenez et êtes en mesure d’exécuter. 11. N’utilisez aucun adoucissant ou produit antistatique autre que ceux recommandés par le fabricant du produit ou de l’appareil. 12. Nettoyez le filtre avant ou après chaque utilisation. 13. Ne sélectionnez pas une température élevée pour faire sécher des articles contenant du caoutchouc mousse ou des matériaux dont la texture est similaire à celle du caoutchouc. 14. Évitez toute accumulation de peluches, poussières et saletés à proximité de l’orifice d’évacuation. 15. L’intérieur de l’appareil et du conduit d’évacuation doit être nettoyé régulièrement, par un technicien de maintenance qualifié. 16. Ne faites pas sécher du linge ayant été en contact avec de l’huile de cuisson. Il risquerait de s’enflammer. Pour réduire le risque d’incendie dû à du linge contaminé, la phase finale d’un cycle du sèche-linge se fait sans chaleur (période de refroidissement). Évitez d’arrêter un sèche-linge avant la fin de son cycle de séchage, sauf si vous sortez et étendez immédiatement le linge afin que la chaleur se dissipe. 17. Cet appareil doit être mis à la terre. Reportez-vous aux chapitres « Normes électriques » et « Mise à la terre » dans la section « Installation ».
CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
8 Français

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 8

2023/6/30 15:02:25

Français

18. Ne laissez pas les enfants jouer sur ou dans l’appareil. Une surveillance attentive s’impose lorsque l’appareil est utilisé à proximité d’enfants.
19. N’insérez pas votre main sous le sèche-linge. – Cela pourrait entraîner des blessures.
20. Veillez à ce que les doigts des enfants ne soient pas pris dans le hublot en le fermant. – Cela pourrait entraîner des blessures.
21. La mise à la terre du panneau de commande et de la vanne d’arrivée d’eau n’a volontairement pas été effectuée ; ces éléments peuvent donc présenter un risque d’électrocution (lors de l’entretien uniquement). – Ne touchez pas ces pièces lorsque l’appareil est sous tension.
Avertissements
AVERTISSEMENT · Vérifiez que les poches sont vides. Les petits objets aux bords irréguliers (pièces de monnaie, canifs, épingles,
etc.) risquent en effet d’endommager votre sèche-linge. · Des fuites de gaz dangereuses pourraient survenir dans votre système.
Mises en garde
ATTENTION · Ne laissez ni les enfants ni les animaux domestiques jouer sur, dans ou devant l’appareil. Une surveillance
attentive s’impose lorsque l’appareil est utilisé à proximité d’enfants ou d’animaux domestiques. · Avant de mettre au rebut ou hors service votre sèche- linge, retirez le hublot du compartiment de séchage pour
éviter que des enfants ou des animaux ne se trouvent piégés à l’intérieur de l’appareil. · N’ouvrez pas le sèche-linge lorsque le tambour est en mouvement. · N’installez et n’entreposez jamais cet appareil dans un endroit exposé aux intempéries. · N’utilisez pas les commandes du sèche-linge inutilement. · Ne procédez pas à la réparation, au remplacement ou à l’entretien des pièces de l’appareil sauf si le manuel
d’entretien contient des recommandations spécifiques en la matière, si vous comprenez ces recommandations et si vous disposez des compétences requises pour réaliser l’opération. · N’utilisez aucun adoucissant ou produit anti- statique autre que ceux recommandés par le fabricant. · Nettoyez le filtre avant ou après chaque utilisation. · Évitez toute accumulation de peluches, poussières et saletés à proximité de l’orifice d’évacuation. · L’intérieur du sèche-linge et du conduit d’évacuation doit être nettoyé régulièrement, par un technicien de maintenance qualifié. · Cet appareil doit être correctement mis à la terre. Ne branchez jamais le cordon d’alimentation sur une prise qui n’est pas correctement reliée à la terre ou qui n’est pas conforme aux réglementations locales et nationales en vigueur. Consultez les consignes d’installation pour relier cet appareil à la terre. · Ne vous asseyez pas sur le sèche-linge.
CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
Français9

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 9

2023/6/30 15:02:25

Français

Consignes de sécurité
· Évitez de faire sécher des vêtements comportant de grandes boucles, des boutons ou d’autres accessoires en métal lourd.
· Une fuite de gaz n’est pas toujours détectable à l’odeur. · C’est pourquoi les fournisseurs de gaz vous recommandent d’acheter et d’installer un détecteur de gaz conforme
à la réglementation UL. · Installez-le et utilisez-le conformément aux consignes du fabricant. · N’introduisez aucun article imprégné ou tâché d’huile végétale ou alimentaire dans votre sèche-linge. Même
une fois lavés, ces articles peuvent encore contenir une quantité non négligeable d’huile. · Toute huile résiduelle sur les vêtements risque de s’enflammer spontanément. Le potentiel de combustion
spontanée augmente lorsque les articles imbibés d’huile végétale ou alimentaire sont exposés à la chaleur. Les sources de chaleur comme votre sèche-linge peuvent chauffer ces articles, engendrant une oxydation de l’huile Cette oxydation crée elle-même de la chaleur. Si cette chaleur ne se dissipe pas, les articles deviennent suffisamment brûlants pour s’enflammer. Entasser, empiler ou stocker ce type d’articles peut empêcher la dissipation de la chaleur et être à l’origine d’un risque d’incendie. · Tout le linge imbibé d’huile végétale ou alimentaire, qu’il soit lavé ou non, peut s’avérer dangereux. Le fait de laver ces articles à l’eau chaude avec une dose supplémentaire de lessive réduit ce risque, sans pour autant le supprimer. Utilisez toujours le cycle Cool Down (Refroidissement), afin de réduire leur température. Ne retirez jamais ces articles du sèche-linge lorsqu’ils sont chauds ; de même, n’interrompez pas le cycle de séchage tant que le cycle Cool Down (Refroidissement) n’est pas terminé. N’entassez et n’empilez pas ces articles lorsqu’ils sont chauds.

CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
10 Français

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 10

2023/6/30 15:02:25

Français

Notification de réglementation
Avis concernant la FCC
ATTENTION
Tous les changements ou modifications non expressément approuvé(e)s par l’autorité responsable de la conformité à la réglementation peut annuler le droit de l’utilisateur à utiliser cet appareil.
Cet appareil est conforme aux dispositions de la section 15 du règlement de la FCC. Le fonctionnement est soumis aux deux conditions suivantes : 1. Cet appareil ne doit pas causer d’interférences nuisibles ; et 2. Cet appareil doit accepter toute autre interférence reçue, y compris les interférences pouvant entraîner un
fonctionnement non désiré.
Pour les appareils vendus aux États-Unis et au Canada, seuls les canaux 1 à 11 sont disponibles. Vous ne pouvez pas sélectionner d’autres canaux.
DÉCLARATION DE LA FCC : Cet équipement a été testé et s’est avéré conforme aux limites d’un dispositif numérique de classe B, conformément à la section 15 du règlement de la FCC. Ces limites sont conçues pour assurer la protection raisonnable contre des interférences nuisibles dans une installation résidentielle. Cet appareil génère, utilise et peut émettre de l’énergie radio électrique et, s’il n’est pas installé et utilisé conformément aux instructions, peut provoquer des interférences nuisibles aux communications par signal radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet appareil cause des interférences nuisibles à la réception des signaux de radio ou de télévision, ce qui peut être déterminé en allumant et en éteignant l’appareil, l’utilisateur est encouragé à essayer de corriger l’interférence par une ou plusieurs des mesures suivantes : · Réorienter ou déplacer l’antenne de réception · Espacer davantage l’appareil du récepteur · Brancher l’équipement sur la prise d’un circuit différent de celui de la radio ou de la télévision. · Consulter le revendeur ou un technicien expérimenté en radio/télévision pour obtenir de l’aide.
DÉCLARATION DE LA FCC SUR L’EXPOSITION AUX RADIATIONS : Cet appareil est conforme aux limitations prévues par la FCC pour l’exposition aux radiations dans le cadre d’un environnement d’accès libre. Cet appareil doit être installé et utilisé avec une distance minimale de 8 po (20 cm) entre le radiateur et votre corps. Ce dispositif et son(ses) antenne(s) ne doivent pas être coimplantés ni utilisés à proximité d’une autre antenne ou émetteur.

CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
Français11

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 11

2023/6/30 15:02:25

Français

Notification de réglementation
Producteur non intentionnel d’émissions selon la Partie 15 du règlement de la FCC Type de produit : Sèche-linge Modèle : DV53BB8900** Partie responsable – Coordonnées de contact aux États-Unis Samsung Electronics America, Inc. QA Lab America 19 Chapin Rd. Building D Pine Brook NJ 07058 Tél : 1-973-808-6375 Fax : 1-973-808-63
Notification IC
Le terme « IC » précédant le numéro d’homologation radio signifie uniquement que les spécifications techniques d’Industry Canada ont été respectées. Le fonctionnement est soumis aux deux conditions suivantes : 1. Cet appareil ne doit pas causer d’interférences ; et 2. Cet appareil doit accepter toute autre interférence, y compris les interférences pouvant entraîner un
fonctionnement non désiré de l’appareil. Cet appareil numérique de classe B est conforme à la norme ICES-003 du Canada. Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada. Pour les appareils vendus aux États-Unis et au Canada, seuls les canaux 1 à 11 sont disponibles. Vous ne pouvez pas sélectionner d’autres canaux. DÉCLARATION D’IC SUR L’EXPOSITION AUX RADIATIONS : Cet appareil est conforme aux limitations prévues par la norme IC RSS-102 pour l’exposition aux radiations dans le cadre d’un environnement d’accès libre. Cet appareil doit être installé et utilisé avec une distance minimale de 8 po (20 cm) entre le radiateur et votre corps. Ce dispositif et son(ses) antenne(s) ne doivent pas être coimplantés ni utilisés à proximité d’une autre antenne ou émetteur.

CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
12 Français

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 12

2023/6/30 15:02:25

Français

Déclaration de logiciel open source
Le logiciel inclus dans cet appareil contient un logiciel de source libre (open source). Vous pouvez obtenir l’intégralité du code source correspondant pendant une période de trois ans après le dernier envoi de cet appareil en adressant un e-mail à l’adresse mailto:oss.request@samsung.com. Il est également possible d’obtenir le code source complet correspondant sur un support physique, tel qu’un CDROM ; des frais minimum seront facturés.
L’URL suivante http://opensource.samsung.com/opensource/SMART_AT_051/seq/0 conduit à la page de téléchargement du code source mis à votre disposition et aux informations de licence de source libre liées à cet appareil. Cette offre est valable pour toute personne ayant reçu ces informations.

REMARQUE Par la présente, Samsung Electronics déclare que l’appareil de type matériel radio est conforme à la Directive 2014/53/EU. Le texte complet de la déclaration de conformité EU est disponible à l’adresse Internet suivante : http://www.samsung.com (la déclaration de conformité officielle est disponible à cette adresse). Allez à Support (Assistance) > Search Product Support (Rechercher une assistance produit) et saisissez le nom de modèle. Puissance max. de l’émetteur Wi-Fi : 20 dBm à 2,412 GHz ­ 2,472 GHz.
CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
Français13

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 13

2023/6/30 15:02:25

Français

Conditions d’installation
Lisez attentivement les instructions suivantes avant d’installer le sèche- linge et conservez ce manuel pour vous y reporter ultérieurement.
AVERTISSEMENT La mise à la terre de certaines pièces internes n’a volontairement pas été effectuée ; ces éléments peuvent donc présenter un risque d’électrocution (lors de l’entretien uniquement). Technicien de maintenance – Ne touchez pas les pièces suivantes lorsque l’appareil est sous tension : panneau de commande et vanne d’arrivée d’eau.
Conditions d’installation principales
· Une prise électrique avec mise à la terre. · Un cordon d’alimentation pour sèche-linge électrique (à l’exception du Canada). · Des conduits de gaz (pour les modèles à gaz) qui respectent les réglementations nationales et locales. · Un système d’évacuation, réalisé en métal rigide ou en métal flexible avec parois rigides. (Non applicable aux
modèles sans aération (pompe à chaleur))
AVERTISSEMENT Retirez le hublot des appareils mis au rebut pour éviter qu’un enfant ne s’étouffe à l’intérieur.
Choix de l’emplacement d’installation
Le sèche-linge doit être installé dans un endroit suffisamment spacieux, tant à l’avant pour permettre de mettre du linge dans l’appareil, qu’à l’arrière pour le système d’évacuation. Ce sèche-linge est équipé en usine pour une évacuation arrière en option. Si vous préférez l’évacuation par le bas, la droite ou la gauche, utilisez le kit d’évacuation auxiliaire. Les instructions sont fournies avec le kit. Veillez à ce que la pièce dans laquelle se trouve le sèche-linge soit suffisamment aérée. Vous devez donc installer le sèche- linge dans une pièce correctement ventilée. Pour les sèche-linge à gaz, respectez un dégagement adéquat (comme indiqué sur la plaque signalétique) afin de garantir une aération appropriée pour la combustion et le bon fonctionnement du sèche-linge. Vous ne devez ni installer ni stocker le sèche- linge dans un endroit où il pourrait être en contact avec de l’eau et/ou exposé aux intempéries. Vous devez maintenir le sèche-linge à l’écart de tous matériaux combustibles, essence et autres vapeurs et liquides inflammables. Un sèche-linge produit des peluches combustibles. Évitez donc que des peluches ne s’accumulent autour.

14 Français
DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 14

2023/6/30 15:02:25

Français

Dimensions

Dimensions (po (mm))

Type Modèles
A. Hauteur totale B. Largeur
C. Profondeur avec hublot ouvert D. Profondeur

Sèche-linge à chargement frontal DV53BB8900** 38,7 (984) 27 (686) 56,1 (1425) 34,3 (872)

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 15

Français15
2023/6/30 15:02:25

Français

Conditions d’installation

Dégagement requis Ce dégagement requis concerne uniquement les sèche-linge.
REMARQUE · Pour connaître le dégagement requis pour le lave-linge, reportez- vous au manuel d’utilisation du lave-linge. · Si les dégagements requis pour le lave-linge et le sèche-linge sont différents, respectez celui dont la valeur est
la plus élevée.
Encastrement dans une niche ou installation dans un placard
AVERTISSEMENT · L’évacuation du sèche-linge doit se faire vers l’extérieur afin de réduire les risques d’incendie si l’appareil est
installé dans une niche ou un placard. · Vous ne devez installer aucun autre appareil fonctionnant au fuel dans le même placard que le sèche-linge. · Placez le sèche-linge à 18 po (460 mm) minimum au-dessus du sol pour une installation dans un garage. Dégagement minimal pour une stabilité optimale :

Côtés 1 po (25 mm)

Haut 1 po (25 mm)

Arrière 2 po (50 mm)

Avant 1 po (25 mm)

Si le lave-linge et un sèche-linge sont tous deux installés au même endroit, le panneau avant de la niche ou du placard doit être doté de deux ouvertures non obstruées ; assurez-vous d’avoir une surface totale combinée d’au moins 72 po2 (465 cm2).

16 Français
DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 16

2023/6/30 15:02:25

Français

Installation sous plan

A

B

C

Installation sur socle

A

39,7 po (1009 mm)

B

1 po (25 mm)

C

1 po (25 mm)

A

2 po (50 mm)

B

6 po (152 mm)

C

52,8 po (1341 mm)

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 17

Français17
2023/6/30 15:02:26

Conditions d’installation

Ce dégagement requis concerne l’installation d’une paire lave-linge/sèche- linge.

Installation côte à côte

Installation empilée

Français

A

1 po (25 mm)

B*

2 po (50 mm)

C

2 po (50 mm)

D

6 po (152 mm)

E

77,5 po (1968 mm)

(B) : le dégagement requis s’applique uniquement au sèche-linge. Pour connaître le dégagement requis pour le lave-linge, reportez-vous au manuel d’utilisation du lave-linge.
REMARQUE
Superposition (SKK-9AL) De nombreux lave-linge et sèche-linge Samsung peuvent être superposés pour optimiser l’espace utile. Les kits de superposition sont en vente chez votre revendeur Samsung. Pour plus détails concernant la superposition et les modèles compatibles, reportez-vous au manuel d’utilisation inclus dans le kit de superposition que vous avez acheté.

18 Français
DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 18

2023/6/30 15:02:26

Français

Conditions requises en matière de conduits (non applicables aux modèles sans aération (pompe à chaleur))

Recommandé

À n’utiliser que pour les installations temporaires

Type de bouche d’évacuation

N° de coudes à 90° 0 1 2 3

4” (10,2 cm) Rigide
80 pieds (24,4 m) 68 pieds (20,7 m) 57 pieds (17,4 m) 47 pieds (14,3 m)

2,5” (6,4 cm) Rigide
74 pieds (22,6 m) 62 pieds (18,9 m) 51 pieds (15,5 m) 41 pieds (12,5 m)

REMARQUE

• Utilisez un conduit rigide en aluminium ou en acier galvanisé d’un diamètre de 4 po (10,2 cm).
  Si vous intégrez le système d’aération du sèche-linge à un système d’évacuation existant : · Assurez-vous que le système d’évacuation soit conforme à toutes les réglementations locales, régionales et
  nationales applicables. · Vérifiez que vous n’utilisez pas un conduit en plastique flexible. · Assurez-vous de vérifier l’absence de peluches accumulées à l’intérieur des conduits existants et de les retirer s’il
  y en a. · Confirmez que le conduit n’est pas entortillé ou écrasé. · Assurez- vous que le registre de la hotte s’ouvre et se ferme sans problème.

Utilisation du manomètre
La pression statique dans un système d’évacuation doit être inférieure à 0 ou ne doit pas dépasser 0,83 pouce. Notez que ces valeurs ont été mesurées avec le sèche-linge en marche, à l’aide d’un manomètre placé au niveau du point
de raccordement entre le conduit d’évacuation et le sèche-linge. Le tambour du sèche-linge doit être vide et le filtre à peluches doit être propre.

DV8900HB_SimpleUX_WEB_OID57652_v1_C-French.indd 19

Français19
2023/6/30 15:02:26

Français

Conditions d’installation
Conditions requises en matière d’évacuation (non applicables aux modèles sans aération (pompe à chaleur))
L’évacuation du sèche-linge ne doit pas être reliée à un conduit de cheminée, un mur, un plafond, un grenier, un espace mansardé ou exigu d’un bâtiment. L’évacuation du sèche-linge vers l’extérieur évite le refoulement d’air humide et de peluches dans la pièce.
Aux États-Unis et au Canada : · Tous les sèche-linge doivent être dotés d’une évacuation vers l’extérieur. · Le diamètre du conduit d’évacuation doit être de 4 po (10,2 cm).

References

• Samsung Open Source
• P65Warnings.ca.gov
• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• Aide et assistance : produits | Samsung Canada
• Product Help & Support | Samsung CA
• Support Home | Official Samsung Support US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>