Ultenic 3129520Y11 T10 Self-Empty Robot Vacuum User Guide
- June 12, 2024
- Ultenic
Table of Contents
Ultenic 3129520Y11 T10 Self-Empty Robot Vacuum
Product Information
-
Brand: Ultenic
-
Model: Unknown
-
Manufacturer: ULTENIC UK LTD
-
Address: Shelton Street, Covent Garden, London, WCH JQ
-
Version: V1.11
-
Website: www.ultenic.com
-
Social Media Accounts:
-
Email Support:
- United States: service-us@ultenic.com
- Germany: service-de@ultenic.com
- France: service-fr@ultenic.com
- Spain: service-es@ultenic.com
- Canada: service-ca@ultenic.com
- United Kingdom: service-uk@ultenic.com
- Italy: service-it@ultenic.com
- Japan: service-jp@ultenic.com
Product Usage Instructions
- Make sure the robot is turned on and has sufficient power.
- Ensure your mobile device is connected to a 2.4GHz WiFi network. If you have a dual-band router, select the 2.4GHz network.
- Enter the correct WiFi name and password when connecting. Avoid using emojis, special characters, or symbols in the WiFi name and password. VPN or Proxy Server usage is not recommended.
- Place the robot and your mobile device close to the router during the connection process.
- To control the robot and access all features, it is recommended to use the Ultenic APP.
- To download and install the Ultenic APP:
- Search for “Ultenic” on the App StoreTM or Google PlayTM, or
- Scan the QR code provided in the manual.
- Launch the Ultenic APP and register an account using a valid email address (required only for the first use), then log in.
- Allow the Ultenic APP to use your WLAN and Cellular Data for successful connection.
- Add your robot device to the APP by selecting the appropriate model.
- Press and hold the specified buttons on your robot for 5 seconds until the indicator starts flashing to enter the network configuration mode.
- Select your Wi-Fi network from the list (only supports 2.4GHz Wi-Fi channels).
- Follow the instructions provided on the distribution network page:
- Ensure the correct Wi-Fi password is entered.
- If your home router is a dual-band router, set the SSID names of the 2.4GHz and 5GHz separately.
- Check if MAC address filtering is enabled on your router or if the assigned IP address limit is reached.
- Avoid network rush hours (18:00 to 23:00) for the initial binding.
- Contact customer service (support@ultenic.com) if the binding is unsuccessful.
- Try to connect with the device by following these steps:
- Go to your phone’s Settings – WLAN.
- Connect to the WiFi network named “Ultenic-XXXX”.
- Return to the Ultenic APP after a successful connection.
Use Your Robot with the Ultenic APP
To enjoy all available features, it is recommended to control your robot via the Ultenic APP.
IMPORTANT TIPS：
-
Make sure the robot is on and the robot has enough power.
-
Make sure your mobile device is connected to a 2.4 GHz WiFi. If your router is a dual-band router, please select the 2.4 GHz network.
-
Make sure you’ve entered the correct WiFi name and password when connecting.
Avoid using an emoji or special characters or symbols in your WiFi name and password. It’s not recommended to use a V PN (Virtual Private Network) or Proxy Server. -
Make sure the robot and your mobile device are close to the router when connecting.
APP Downloading and Installation
Search for Ultenic from App Store™/Google Play™, or scan the QR code below to download and install the application.
Note:
Google Play™ is a trademark of Google Inc., and App Store™ is a trademark
of Apple Inc.
WiFi Connection
-
Launch the APP, register an account with a valid email address at your first use, then log in.
Note:
For a successful connection, please allow the APP to use your WLAN & Cellular Data when running it. -
Add device and select the model of your robot.
-
Press and hold “ ” and “ ” for 5 seconds until the indicator is flashing to enter the network configuration.
-
Select the same router’s WiFi and enter the correct password.
-
Go to Settings and WLAN list to connect to the robot’s hotspot “Ultenic-XXXX”.
-
Go back to Ultenic APP and complete the WiFi connection.
Control the Robot with Amazon Alexa
IMPORTANT TIPS：
- Make sure the robot has enough power and the Power Switch of the robot is pressed to ON.
- You have connected the robot to Ultenic APP.
- Make sure you’ve installed Alexa APP on your mobile device.
- Make sure the WiFi connection is stable.
Step 1:
Log in to Alexa APP with your Amazon account, tap “ ” on the upper left corner
of the homepage, then select Skills & Games.
Step 2:
Search and select Ultenic Home, then enable it by tapping ENABLE TO USE.
Step 3:
Enter the email address and password for logging in to the Ultenic APP, then
tap Authorize to continue.
Step 4 :
Tap Done to close the page, then tap DISCOVER DEVICES to discover the robot
which has been connected in Ultenic APP.
Step 5:
After the robot is discovered, please tap CHOOSE DEVICE to set up your device.
Step 6:
Tap “ ” and allow Alexa APP to access the microphone of your mobile device.
Then you can say the following voice commands to your mobile device, the robot
will respond accordingly.
“Alexa, turn on the robot (or your robot’s name if you changed the device
name).”
“Alexa, turn off the robot.”
Note:
If you have an Echo device at hand, please follow the steps below to make it available for voice commands.
- Log in to your Echo device with the same Amazon account for logging into Alexa APP.
- Tap Devices on the bottom, then tap Echo & Alexa to show your Echo device.
Then you can speak the voice commands mentioned above, and the robot will respond accordingly as well.
Control the Robot with Google Assistant
IMPORTANT TIPS
- Make sure the robot has enough power and the Power Switch of the robot is pressed to ON.
- You have connected the robot to Ultenic APP.
- Make sure you’ve installed Google Home APP on your mobile device.
- Make sure the WiFi connection is stable.
Step 1:
Launch Google Home APP, then follow the in-app instructions to set up your
Google account.
Step 2:
Tap Settings on the main page, then scroll down to the bottom to tap Works
with Google.
Step 3:
Tap “ ” on the upper right corner, then search and select Ultenic Home.
Step 4:
Enter the email address and password for logging in to Ultenic APP.
Step 5:
Tap Link Now and Authorize, it will show you Ultenic Home is linked.
Step 6:
Follow the instructions to set up the device to finish the settings.
Step 7:
Tap “ ” and allow Google Home to access the microphone on your mobile device.
Then you can say the following voice commands to your mobile device, and the robot will respond accordingly.
- “OK Google, turn on the robot (or your robot’s name if you changed the device name).”
- “OK Google, turn off the robot.”
- “OK Google, robot go home.”
Note:
If you have a Google Home Speaker at hand, please follow the steps below to make it available for voice commands.
- Plug your Google Home Speaker into the socket.
- Tap + on the upper left corner of the main page, then select Set up device.
- Tap Set up new devices, then tap Next to look for devices.
- Follow the instructions of Google Home APP to connect your Google Home Speaker to WiFi.
Then you can speak the voice commands mentioned above, and the robot will respond accordingly as well.
Troubleshooting Guide
Q. Why cannot the robot connect to WiFi?
Make sure you’ve entered the right password.
Keep the robot, mobile device and your router being as close as possible.
Make sure you selected a 2.4 GHz WiFi, the 5 GHz band is not supported.
Q. Why does the robot show that it’s offline?
Make sure you have switched on the robot and check the network connection of
your mobile device.
Q. Why cannot I control the robot with Alexa?
- Please check the network connection of your mobile device.
- Make sure you’ve connected the robot to Ultenic APP.
- Make sure you’ve enabled “Ultenic Home” Skill in Alexa APP.
- Make sure your robot has been discovered in Alexa APP.
- Make sure you are using correct Alexa voice-commands.
Q. Why cannot I control the robot with Google Assistant?
- Please check the network connection of your mobile device.
- Make sure you’ve connected the robot to Ultenic APP.
- Make sure you’ve initiated the “Ultenic Home” action in Google Home APP.
- Make sure your robot has been discovered in Google Home APP.
- Check if you are using the proper commands when talking to the Google Assistant. When making your request, first say the wake-up words “OK Google” or “Hi Google” .
Q. How many robots can I connect to the same account?
There is no limitation on the number of robots.
Q. How many accounts can I share the robot with?
There is no limitation on the number of accounts.
Customer Service
United States
service-us@ultenic.com
ULTENIC UK LTD
71-75 Shelton Street, Covent Garden, London, WC2H 9JQ
www.ultenic.com
Ultenic_Official
ultenic__official
UltenicOfficial
Ultenic_Official
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>