Intellitronix MS9016B LED Digital Fuel Gauge Installation Guide
- June 12, 2024
- Intellitronix
Table of Contents
Intellitronix MS9016B LED Digital Fuel Gauge
Thank you for purchasing this instrument from Intellitronix. We value our customers!
- Always disconnect the battery before attempting any electrical work on your vehicle.
WIRING INSTRUCTIONS
Note: Automotive circuit connectors are the preferred method of connecting wires. However, you may solder if you prefer.
| Model | Resistance | Wire(s) to cut |
|---|---|---|
| Ford/Chrysler | 10 to 73 OHM | NONE |
| GM | 0 to 90 OHM | Blue |
| VDO | 10 to 180 OHM | Blue & Orange |
| Universal | 33 to 240 OHM | Orange |
Ground – Black Connect directly to an engine ground such as the engine block. For the most accurate readings, connect to the same ground that the sending unit is attached to.
Power – Red Connect to a switched +12V source such as the ignition switch.
Note: The device will NOT function properly without a steady +12V source. For best results, use a multimeter to test the power source.
Dimmer – Purple Connect to the parking lights to dim the LEDs 50% when the headlights are on. However, do not connect to the headlight rheostat control wire; the dimming feature will not work properly. Otherwise, connect to ground for permanent 100% brightness.
Pressure – Yellow Connect to the output of the sending unit.
Part Number: M9016
Made in America
Lifetime Guarantee
Documents / Resources
|
Intellitronix MS9016B LED Digital Fuel
Gauge
[pdf] Installation Guide
MS9016B LED Digital Fuel Gauge, MS9016B, LED Digital Fuel Gauge, Digital Fuel
Gauge, Fuel Gauge, Gauge
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>