PROMISE ELECTRONIC TRADE CW61 Capture Bluetooth 5.3 Wireless Headphones Instruction Manual
- July 26, 2024
- PROMISE ELECTRONIC TRADE
Table of Contents
PROMISE ELECTRONIC TRADE INC.
HONEST IS THE BEST POLICY.
CW61
- touch button
The Earphons and the Touch Button
How to Connect:
1. Earphones Power On/Powe Off:
Open the cover of the charging case, and the earphones will automatically
power on. Close the cover of the charging case to power off the earphones.
2. Pairing (First Use):
Turn on the wireless feature on your mobile phone. Open the lid of the
charging case, and the earphones will automatically power on. Search for the
wireless device named “CW61” and click to connect. After the connection is
successful, the earphones will prompt “Connected”.
How to Use
Play/Pause: Click the left/right earphone touch button.
Previous/Next Song: Press the left earphone touch button for 2 seconds to
play the previous song; Press the right earphone touch button for 2 seconds to
play the next song. Siri function: In the connected state, triple-tap the
left/right earphone touch button to active the Siri function.
Answer/Hang up: When the first call comes in, click the touch button on
the left/right earphone to answer; During the call, press the left/right
earphone touch button for 2 seconds to hang up. Reject a Call: When the first
call comes in, press the touch button on the left/right earphone for 2
seconds.
Secure Pairing: If the wireless device connected to the mobile phone is
lower than wireless version 3.0, enter the default security code “0000” when
the password prompt appears to pair with your mobile phone.
Automatic Power-Off: To save electricity, when the earphones are
disconnected from the mobile phone, they will automatically power off after 5
minutes.
Reset: To reset the earphone, place it back into the charging case.
The video page-turning/Shooting function of the charging case
How to Connect
1. Charging Box Power On/Power Off
Press and hold the round button for 2 seconds to power-on;
Press and hold the round button for 5 seconds to power-off .
2. Pairing (First use)
Turn on the wireless feature on your mobile phone. Turn on The charging box.
Search for the wireless device named “CW61 FanYe” and click to connect.
A: Round button
B: Square button
How to Use
Play/Pause: Click the round button when the video is playing.
Volume +: Double-click the round button to increase the volume when the
video is playing.
Take a Photo: When the camera is on, double-click the round button to
capture a picture.
Video Recording Start/Pause: When recording, double-click the round
button to start/pause.
Previous Video/Next Video: When the video is playing, short press the
square button to play the next video. Three clicks on the square button to
play the previous video
Like: When the video is playing, double-click the square button to like
the video.
iPhone Usage Tutorial: Settings — Accessibility — Touch — AssistiveTouch
— Enable AssistiveTouch — Adjust the tracking sensitivity to the middle position. Refer to the images below for guidance:
*After completing step 4, scroll down the page to locate a progress bar that tracks sensitivity. Adjust it to the middle position, if possible, for optimal usage. If turning the page normally becomes challenging, fine-tune the tracking sensitivity to the left or right as needed. After the adjustment, close the AssistiveTouch feature. Reopen AssistiveTouch to apply the changes. Note: Apple system iOS13 or iOS14 and other older versions do not have tracking sensitivity display. The progress bar with tracking sensitivity must be operated according to step 5.
How to Charge
Charging the Charging Case:
Use a low-power charger below 5V-1 A to charge. When charging, The red light
flashes. When fully charged, the red light stays steady
(The charging case takes about 2 hours to be fully charged).
Charging the Earphones:
Place the left and right earphones correctly in the charging case. Close the
charging case, and the red light on the headset will illuminate. When fully
charged, the red light turns off. The earphones takes about 1.5 hours to fully
charge. A fully charged charging case can provide about 3 cycles of charging
for the earphones.
Low Battery Indication
When the earphone battery is low, a voice prompt of “Battery low” will occur
once every minute.
Note: If there is no display on the charging box’s light, it indicates
that the power has been completely exhausted. Please use this product after a
full charge.
Certificate of quality
Product leve: A grade
QC
PASSED
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.