UGREEN CM408 USB Bluetooth Transmitter for Switch/PlayStation User Manual
- June 5, 2024
- UGREEN
Table of Contents
UGREEN CM408 USB Bluetooth Transmitter for Switch/PlayStation
Product Details
- USB 2.0
- Working status indicator
How It Works
Specifications
| Model | CM408 |
|---|---|
| P/N | 10928 |
| Frequency range | 2400MHz-2483.5MHz |
| Frequency response | 20Hz-20kHz |
| SNR | > 90dB |
| THO | <0,1% |
| Codec | SBC |
| Transmission distance | 10m |
Instructions
Bluetooth Connection
Step 1: Turn on your Switch dock or PlayStation host, insert the product into the USB port of the device, and then enter an automatic pairing status, the indicator blinks blue and white.
Step 2: Turn on your Bluetooth headset or speaker, the product will
automatically pair with and connect to the device. The whole process may last
for around 10 seconds.
Step 3: The white indicator blinks once per 10 seconds representing the
connection is ready.
Bluetooth Connection Notices
- While connecting, the Bluetooth device should place around the product with an efficient distance of 10m.
- If the connection operation fails repeatedly, please restart the product or your device.
- Connection timed out: During the pairing status, if the product fails to connect to Bluetooth device within 3 minutes, it will enter reconnection status, try to connect the headphones to the product.
- Abnormal disconnection: Once connected, abnormal connection may cause a disconnection and the product will be ready for pairing again.
Auto Reconnection
The product can memorize the paired ID once connected, which can facilitate an auto reconnection to the last two paired IDs the next time.
One for Two
When the product paired with Receiver A, turn Receiver A off and restart the product, then pair with Receiver B; once paired, re-open the Bluetooth access of Receiver A and the product will reconnect to Receiver A again, so the product will be connected to both Receiver A and Receiver B together.
Indicator Status
| Operating Status | Indicator Sign |
|---|---|
| Turn on | Glows solid white for 3 seconds |
| Turnoff | White indicator turns off |
| Pairing | Blinks blue and white |
| Connected | Blinks white per 10 seconds |
| Reconnection | Blinks white per 5 seconds |
| Disconnection | Blinks white per5 seconds |
Notes
- During “One for Two” mode, the most available transmission distance between Device A/Band the product should be less than 5m.
- The calling function is unavailable.
Package Contents
Important WEEE Information
This symbol on the product(s) and/ or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge.
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please
contact your dealer or supplier for further information.
For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU). If you wish to discard
this product please contact your local authorities or dealer and ask for the
correct method of disposal.