Intellitronix TB2101 Corvette Tachometer Rebuild PCB Installation Guide
- June 12, 2024
- Intellitronix
Table of Contents
Made in America
Lifetime Guarantee
Thank you for purchasing this instrument from Intellitronix. We value our
customers!
INSTALLATION GUIDE
Corvette Tachometer recall
Part Number: TB2101
Year Series: ‘78 – ‘79
- Disconnect the battery before attempting any electrical work on your vehicle. *
KIT COMPONENTS:
- One (1) Printed Circuit Board
- Three (3) Nylon washers
CIRCUIT BOARD INSTALLATION INSTRUCTIONS
- Remove the tachometer from the housing
- Flip the tachometer over and remove the three nuts securing the circuit board to the gauge.
- Remove the three remaining screws from the original circuit board.
- Insert the three screws from step (3.) into the Intellitronix circuit board at the locations marked +12V, GND, and Coil.
- Put the three nylon washers on the screws protruding from the gauge.
- Slide the circuit board onto the three screws pointing towards the gauge.
- Replace the nuts back onto the three screws.
- Put the tachometer back into your housing.
#
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>