Intellitronix TB2102 Corvette Tachometer Rebuild PCB Instructions
- June 12, 2024
- Intellitronix
Table of Contents
Instructions
TB2102 Corvette Tachometer Rebuild PCB
Thank you for purchasing this instrument from Intellitronix. We value our
customers!
INSTALLATION GUIDE
Corvette Tachometer recall
Part Number: TB2102
Year Series: ‘80 – ‘82
- Always disconnect the battery before attempting any electrical work on your vehicle.*
KIT COMPONENTS:
- One (1) Printed Circuit Board
- Three (3) Nylon washers
CIRCUIT BOARD INSTALLATION INSTRUCTIONS 
- Remove the tachometer from the housing
- Flip the tachometer over and remove the three nuts securing the circuit board to the gauge.
- Remove the three remaining screws from the original circuit board.
- Insert the three screws from step (3.) into the Intellitronix circuit board at the locations marked +12V, GND, and Coil.
- Put the three nylon washers on the screws protruding from the gauge.
- Slide the circuit board onto the three screws pointing towards the gauge.
- Replace the nuts back onto the three screws.
- Put the tachometer back into your housing.
Made in America
Lifetime Guarantee
Documents / Resources
|
Intellitronix TB2102 Corvette Tachometer Rebuild
PCB
[pdf] Instructions
TB2102 Corvette Tachometer Rebuild PCB, TB2102, Corvette Tachometer Rebuild
PCB, Tachometer Rebuild PCB, Rebuild PCB, PCB
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>