Intellitronix MS9108B LED Digital Oil Temperature Gauge Instructions
- June 12, 2024
- Intellitronix
Table of Contents
Instructions
MS9108B LED Digital Oil Temperature Gauge
Thank you for purchasing this instrument from Intellitronix. We value our
customers!
INSTALLATION GUIDE
LED Digital Oil Temperature Gauge
Part Number: M9108
- Always disconnect the battery before attempting any electrical work on your vehicle.*
KIT COMPONENTS
- Digital Oil Temperature Gauge: Displays 18 – 255° F. range
- Pressure Sending Unit (S8013)
- Mounting equipment
WIRING INSTRUCTIONS
Note: Automotive circuit connectors are the preferred method of
connecting wires. However, you may solder if you prefer.
Ground – Black Connect directly to an engine ground such as the engine
block.
For the most accurate readings, connect to the same ground as the sending
unit.
Power – Red Connect to a switched +12V source such as the ignition switch.
Dimmer – Purple Connect to the parking lights to dim the LEDs 50% when the
headlights are on. However, do not connect to the headlight rheostat
control wire; the dimming feature will not work properly.
Temperature – Blue Connect to the output of the temperature sending unit. Do
not use Teflon tape or other sealer on the new sending unit’s threads to avoid
inaccurate readings.
Made in America
Lifetime Guarantee
Documents / Resources
|
Intellitronix MS9108B LED Digital Oil Temperature
Gauge
[pdf] Instructions
MS9108B LED Digital Oil Temperature Gauge, MS9108B, LED Digital Oil
Temperature Gauge, Digital Oil Temperature Gauge, Oil Temperature Gauge,
Temperature Gauge, Gauge
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>