AIRTHINGS Space Nano Wake Up Device from Shelf Life User Manual
- June 12, 2024
- Airthings
Table of Contents
Space Nano
Space Nano is the discreet answer to increasing focus on monitoring in
schools, public buildings and offices.
Offered in a 2-pack, Space Nano helps cover more spaces in your building,
ensuring optimal temperature humidity. Apply even outdoor. Wireless, with more
than 10 years battery lifetime.
PACKAGE CONTENT
Space Nano
2 x Lithium AA 1.5V batteries
2x Double-sided tape
2 devices included in package
Weight: TBD
Dimensions: 4.5 x 4.1 x 1.4 in
(115 x 105 x 36 mm)
PRODUCT CODES
EU and UK 313xxxxxxx – serial number
2-pack EU and UK SKU 13130, EAN TBD UPC NA
US and CA 314xxxxxxx – serial number
2-pack US and CA SKU 13140, EAN NA UPC TBD
MOUNTING
Optimum product placement is on wall 4 – 6 ft (1.2 m – 1.8 m) above floor.
Double sided tape for mounting included.
Alternatively use two fully threaded countersunk screws 3.5 x 25mm or longer
(not included). For masonry/concrete add expansion plug. For plaster walls,
special plugs should be used. If needed, the product can also be placed > 6 ft
(1.8 m) above floor, but in this case mounting with screws is mandatory. Can
also be mounted outdoor with screws.
REQUIREMENTS
Dimensions: ~ 37 x 84 x 22 mm)
Weight: TBDg with batteries
Space Hub is needed to post sensor values to cloud
PRODUCT FEATURES
Sensors: Temperature, Relative Humidity, Pressure, Light (lux) Virtual sensors
included: Ventilation on/off, please consult web dashboard for latest
Battery life more than 10 years
Do not submerge in water
IP protection grade: IP64
Firmware updates are automatically downloaded and installed over the air (OTA)
via the Space Hub Smart Link frequencies: 865-870 / 902-928 MHz depending
product
PRODUCT SPECIFICATIONS
Operational Environment (Temperature, Relative Humidity):
-22°F to 140°F (-30 ºC to 60 °C) TBD / 5% – 99%
SENSOR SPECIFICATIONS
Sensor sampling interval: min default and 2.5 min optional
TEMPERATURE AND RELATIVE HUMIDITY SENSORS
Temperature Accuracy: ± 0.2 ℃ /± 0.4 F and Humidity Accuracy: ± 2.0 % RH
within product operating range
RADIO SPECIFICATIONS BLUETOOTH LOW ENERGY
Used for commissioning only
Output power: <10 mW
Frequency Range (MHz): 2400.0 – 2483.5
AIRTHINGS SMARTLINK
Used to post sensor values
5 PRESSURE SENSOR
Absolute pressure accuracy: ± 30 Pa
Unit-to-unit pressure accuracy: ± 10 Pa
Operating range for full accuracy 300 – 1250 hPa
LIGHT SENSOR
Light sensor is measured in received luminous flux per unit area, also known as
lux
Light sensitivity varies with incoming light direction as shown in graph.
Absolute Accuracy in most sensitive direction: ±5 lux ±10% within 0 – 5000lux
VIRTUAL SENSORS
Ventilation on/off TBD. Please consult web dashboard for latest
RADIO SPECIFICATIONS BLUETOOTH LOW ENERGY
Used for commissioning only Output power: <10 mW
Frequency Range (MHz): 2400.0 – 2483.5
AIRTHINGS SMARTLINK
Used to post sensor values
Output power: < 25 mW
Frequency range (MHz): Europe 868 – 870
North America 902-928
PRODUCT ON-BOARDING AND DAILY USE
Wake up device from shelf life: Take products out of packaging and touch Air
things logo on product with finger. Product blinks blue when device wakes up
from shelf life until on-boarded in Air things Business App. If not completed
on-boarding in Air things Business App within 10 minutes, device will go back
into shelf life mode. To wake up device again, touch Air things logo on
product with finger
Once completed on-boarding in Air things Business App, LED pulses white while
device connects to Space Hub and continues to pulse white until device is
connected all the way to Air things cloud. When completely connected, LED
pulse stops. Successful connection can then at any time be confirmed by
touching Air things logo on product front with finger: single white blink if
connected via Space Hub to cloud, single blue blink if not connected.
In case Smart Link connection is lost, within 10 min LED will blink green one
time followed by white LED pulse for up to 1 min or until connected to Space
Hub. In case no connection is established, the connection retries and blink
pattern will repeat at increased intervals, to not deplete batteries.
Touching Air things logo on product front any time with finger: single white
blink if connected via Space Hub to cloud, single blue blink if not connected.