Airthings COR7276-A Renew Bedroom Air Purifier User Guide
- June 1, 2024
- Airthings
Table of Contents
Airthings COR7276-A Renew Bedroom Air Purifier
GETTING STARTED
- Stand to Renew upright with the strap handle up and the cable compartment to the side.
- Remove the cable compartment cover. Attach the power cable first to the input inside the compartment, then to a power outlet. Renew will start in Auto mode.
- Replace the cover and wind any extra length of cable inside it.
- Download the Airthings app, create your account, and connect to Renew.
DOS & DON’TS
-
Do read the User
Manual for complete safety and use instructions. -
Do feel free to move
Renew from room to room using the strap handle. -
Don’t place any items on top of the unit.
-
Don’t block the airflow near the front cover, the top outlet grill, or the Airthings Sensor System. Leave at least 8 in (20 cm).
OUR TOP TIPS
- Use Auto mode — it will keep your air clean and minimize energy use.
- Need maximum cleaning power? Press Boost to run Renew at the highest speed for 1 hour.
- Ready for bed? Press Silent to run Renew on the quietest speed for 8 hours.
- Check your air quality with a glance:
- Green means Good
- Yellow means Fair
- Red means Poor
With the Airthings app, you can control Renew remotely, order replacement filters, and use customizable graphs to understand your current and past air quality trends.
Need a little help
For support articles go to help.airthings.com or contact our customer service team by email at [email protected].
Follow @airthings on
Read User Manual Online (PDF format)
Loading......