NETGEAR GS748T ProSafe 48-port Gigabit Smart Switch Specifications And Datasheet

NETGEAR GS748T ProSafe 48-port Gigabit Smart Switch

Introduction

High Port Density Gigabit with Browser-based Management Included
Joining NETGEAR’s family of Smart Switches with simple switch management at no extra cost, this 1U high, 48-port Gigabit switch maximizes bandwidth and density for great value and capability. With 48 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data throughput in full-duplex mode, plus four optional fiber ports, it provides a 40 Gbps back-bone and connects servers or power users, delivering large amounts of multimedia, image, and video information in no time at all. Standards-based, it is ideal for combining 10, 100, and 1000 Mbps devices, as it delivers automatic speed and full/half-duplex sensing plus Auto Uplink™ on every port.

Four hot-swappable Small Form-factor Pluggable (SFP)** GBIC slots provide optional fiber connectivity for greater distance. An intuitive, web-browser interface offers simple switch management, making it a snap to monitor switch performance, configure ports, even set up trunks, VLANs, and prioritization.

High Density

48 10/100/1000 ports deliver full-speed packet forwarding in a 1U size to migrate your network to future-proof functionality. Four SFP GBIC fiber slots provide optional fiber connectivity for greater distance.

Intelligent

Smart Switch capability enables key management features for the value price of an unmanaged switch. Included are performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization.

Right Sized

Ideal for growing businesses that want the benefits of management without the cost. Compatible with Windows, MAC and Linux operating systems.***

Easygoing and Durable

Simple to set up and simple to use for effortless network monitoring and troubleshooting. Made to last, this sturdy switch is housed in a 17-inch metal box and comes with a rack mounting kit.

• Use with NETGEAR AGM731F 1000BASE-SX SFP GBIC module or NETGEAR AGM732F 1000BASE-LX SFP GBIC module.
• Requires PC for initial discovery of Smart Switch features.

Connection

Product Specifications

• Network Protocol and Standards Compatibility
  • IEEE 802.3 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX Fast Ethernet
  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet
  • IEEE 802.3x full-duplex flow control
• Interfaces
  • 48 RJ-45 connectors for 10BASE-T,
  • 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports)
  • 4 SFP slots for fiber Gigabit Ethernet modules
• Administrative Switch Management
  • IEEE 802.1Q Tag VLAN (up to 64 Static VLAN groups)
  • Port-based VLAN (up to 48 groups)
  • IEEE 802.1p (Class of Service)
  • Port-based QoS (options High/Normal)
  • Port Trunking – Manual as per IEEE802.3ad Link Aggregation
  • DHCP client function
  • Port setting
  • Web-based configuration, anywhere on the network
  • Smart Wizard Discovery Utility program auto-discovers devices (up to 254 agents/switches); sets system configuration to each agent
  • Configuration Backup/Restore (easy to configure more than one switch)
  • Password access control and Restricted IP Access List
  • Firmware upgradeable
• Active Flow Control
  • Half-duplex back-pressure control
  • Full-duplex IEEE 802.3x pause frame flow control
• Performance Specifications
  • Forwarding modes: Store-and-forward
  • Bandwidth: 40 Gbps
  • Network latency: Less than 20 µs for 64-byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission
  • Buffer memory: 1,632 KB embedded memory per unit
  • Address database size: 16,000 media access control (MAC) addresses per system
  • Addressing: 48-bit MAC address
  • Mean Time Between Failure (MTBF): 69,930 hours (~8 years)
• LEDs
  • Unit : power
  • Per port: link, activity, speed
• Power Supply
  • Power Consumption: 70 W maximum
  • 100-240VAC/50-60 Hz universal input
• Physical Specifications
  • Dimensions (H x W x D): 1.7 x 17.3 x 10.25 in. (43 x 440 x 260 mm)
  • Weight: 8a.8 lbs (4.0 kg)
• Environmental Specifications
  • Operating temperature: 32 to 104°F (0 to 40° C)
  • Storage temperature: 14 to 158°F (-10 to 70°C)
  • Operating humidity: 90% maximum relative humidity, non-condensing
  • Storage humidity: 95% maximum relative humidity, non-condensing
  • Operating altitude: 10,000 ft (3,000 m) maximum
  • Storage altitude: 10,000 ft (3,000 m) maximum
• Electromagnetic Compliance
  • CE mark, commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • EN 55022 (CISPR 22), Class A
  • EN 50082-1
  • EN 55024
  • C-Tick
• Safety Agency Approvals
  • UL listed (UL 1950)/cUL
  • IEC950/EN60950
• Warranty
  • NETGEAR 5-year warranty

System Requirements

• Category 5 network cables
• Network card for each PC
• Network software (e.g., Windows®)

Package Contents

• 48-port Gigabit Smart Switch GS748T
• Rubber footpads
• Power cord
• Rack-mount kit
• Smart Switch Resource CD
• Smart Switch Installation guide
• Warranty/Support information card

Modules

• NETGEAR AGM731F 1000BASE-SX SFP GBIC Module with LC connectors for 50um or 62.5um multi-mode fiber cable
• NETGEAR AGM732F Fiber 1000BASE-LX SFP GBIC Module with LC connectors for 9um single-mode fiber cable

Related NETGEAR ProSafe Products

• GA311 32-bit Gigabit PCI Adapter
• GS105 5-port Gigabit Switch
• GS108 8-port Gigabit Switch
• GS116 16-port Gigabit Switch
• GS516T 16-port Gigabit Switch
• GS524T 24-port Gigabit Switch
• FS526T 24-port 10/100 Smart Switch with 2 Gigabit Ports
• FS750T 48-port 10/100 Smart Switch with 2 Gigabit Ports
• GS724T 24-port Gigabit Smart Switch
• P3L21 Layer 2 Support Pack
  • 1 year
• P3L23 Layer 2 Support Pack
  • 3 years

Support

• Address: 4500 Great America Parkway Santa Clara, CA 95054 USA
• Phone: 1-888-NETGEAR (638-4327)
• E-mail: info@NETGEAR.com
• Website: www.NETGEAR.com

Trademarks

©2004 NETGEAR, Inc. NETGEAR®, the Netgear Logo, Auto Uplink, ProSafe, and Everybody’s Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft, Windows, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change
without notice. All rights reserved.

• Free basic installation support is provided for 90 days from the date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support is available.

FAQ’s

What is the NETGEAR GS748T ProSafe 48-port Gigabit Smart Switch?

The GS748T is a smart switch with 48 Gigabit Ethernet ports, designed for businesses seeking advanced networking capabilities.

How many Ethernet ports does this switch have?

The switch is equipped with 48 Gigabit Ethernet ports, providing ample connectivity options.

Does it support Power over Ethernet (PoE)?

Some models of the GS748T offer PoE capabilities, enabling power delivery to compatible devices through the Ethernet ports.

What type of layer support does this switch offer?

The switch supports Layer 2 and basic Layer 3 features, allowing for network segmentation and traffic optimization.

What is the switching capacity of this switch?

The switch typically offers a switching capacity of around 96 Gbps, ensuring efficient data transfer across multiple ports.

Can I create VLANs with this switch?

Yes, the switch supports Virtual LAN (VLAN) functionality, including IEEE 802.1Q VLAN tagging.

Does it support Quality of Service (QoS)?

Yes, the switch often includes QoS features to prioritize specific types of network traffic.

How do I manage this switch?

The switch can be managed through a web-based interface and, in some cases, through a command-line interface (CLI).

Can I enhance security with this switch?

Yes, the switch often offers security features like Access Control Lists (ACLs) and port security to control network access.

Is it suitable for businesses of all sizes?

The GS748T is particularly well-suited for small to medium-sized businesses that require advanced networking capabilities.

Does it support redundancy features?

Yes, the switch often supports Link Aggregation (LAG) and Spanning Tree Protocol (STP) for network redundancy.

Is this switch rack-mountable?

Yes, the switch is designed for rack installation, making it suitable for data center environments.

References:NETGEAR GS748T ProSafe 48-port Gigabit Smart Switch – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>