Shenzhen Kingsun Enterprises SP873-BLACK-PAIR TWS Pair Bluetooth Speaker Instructions
- June 6, 2024
- Shenzhen Kingsun Enterprises
Table of Contents
TWS PAIR
BLUETOOTH SPEAKER
SP873-BLACK-PAIR
**Important Safety:
**
CAUTION
-Risk of explosion if the battery is replaced by an incorrect type.
-High or low extreme temperatures that a battery can be subjected to during use, storage or transportation; and low air pressure at high altitude.
-Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
-Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
-Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
-A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas
-Keep a minimum of 10 cm around this unit to allow good ventilation.
-No naked flame sources, such as lighted candles, should be placed on the apparatus.
-Internal batteries should not be exposed to excessive heat such as sunlight, fire, etc.
-Attention should be drawn to the environmental aspects of battery disposal. Dispose of used batteries according to the instructions.
-Make sure the ventilation openings are not obstructed, with a newspaper, tablecloth, or curtains.
To prevent possible hearing damage, do not listen to high volume levels for long periods.
Package includes :
Bluetooth speaker x 1
USB to micro USB cable x 1
User manual x 1
AUX cable x 1
**Functionality:
**
-
Micro TF card slot
Insert the Micro TF card into the speaker to play M P3 files automatically.
Note: Maximum size of TF card that can be connected is 32G. -
USB disk slot
Insert the USB disk into the speaker to play M P3 files automatically.
Note: Maximum size of USB disk that can be connected is 32G. -
AUX port
For AUX mode, plug a 3.5mm AUX cable( included)into the AUX port, and connect the other end of the 3.5mm cable into your music device. -
Charging port
Connect the small end of the micro USB charging cable(included) to the charging port, and connect the large end of the cable to your computer’s USB port or an AC adaptor(not included)to charge the speaker. -
Indicator light
When charging, the indicator light will turn red, after full charge, the red indicator light will turn off. -
ON/OFF Standby button Long press the buttons to turn on or turn off the speaker in standby mode.
-
Hand-free function
In Bluetooth mode, short press to answer a call, short press again to hang up the call.
In Bluetooth/TF/USB/Radio modes, short press button to PLAY/PAUSE the song.
In radio mode, short press the button to search for the channels. -
– key In Bluetooth/TF/USB modes, short press
—key to change to the previous song, long press
—key to decrease the volume. In radio mode, short press
—key to change to the previous channel, long press
— key to decrease the volume. -
+ key In Bluetooth/TF/USB modes, short press +key to change to next song, long press +key to Increase the volume. In radio mode, short press +key to change to next channel, long press + key to increase the volume.
-
M Key
Short press the M key to switch between BT/TF/USB/FM/AUX modes.
Long press the M key to turn on or turn off the light.
Bluetooth Pairing:
Long press the ****button to turn the speaker on, then search for “JP103” in
your phone and connect to it.
You wilt hear an audio prompt when the speaker has paired successfully with
your device.
Pairing TWS:
Turn the two speakers on and ensure these two speakers did not connect with
any Bluetooth device, then the long-press button on one of the speakers. You
will hear an audio prompt when the speakers have paired each other
successfully. Only one Bluetooth pairing name “JP103” appeared in your device
means the TWS speakers are ready to pair.
Technical Specifications:
Power: DC 5V, 0.5A
Battery: 1200mAh
Battery run time:3-6 hours
Operation temperature: 0-45°C
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>