Shenzhen Kingsun Enterprises LT-1475 Bluetooth RGB LED Strip Light User Manual
- June 6, 2024
- Shenzhen Kingsun Enterprises
Table of Contents
LT-1475
Bluetooth RGB LED
STRIP LIGHT
APP CONTROLLED SMART LED LIGHTING
4 STRIPS INCLUDED
DOWNLOAD THE APP
CONNECT WITH
BLUETOOTH
USER MANUAL
3MNLA0638B0G7
INSTALLATION
- Clean the surface you intend to stick the light strip to.
- Peel off the backing strip of the 3M adhesive tape.
- Press and hold the light strip firmly against the surface.
- Plug the DC Adapter into your car’s 12V DC power socket.
OPERATION
- Press the power button located on the DC plug. The LED power indicator will illuminate indicating there is the power to the LED accent light.
- Scan QR code to download Monster Smart App. You can also find it on the IR connector.
https://apps.apple.com/us/app/monster-smart-app/id1447483342|
https://play.google.com/store/apps/details?id=com.monster.smart&hl=en_US&gl=US
---|---
- Open the Monster Smart app and register a user account.
- Click the Add Device button as shown and follow the steps to add the Monster Car LED Strips manually or automatically.
- After adding the light strip, you can change the LED color or adjust the brightness to your favorite mood.
- Press the button on the IR connector to change the light color.
PACKAGING CONTENTS
(4pc) LED Light Strips with Smart App Control
(1) DC 12V Car Adapter
(1) User Manual
TECHNICAL DATA
Voltage supply: LED strips (USB) 5V Output: 2.5W
SAFETY AND CARE INSTRUCTIONS
- Do not attempt to disassemble the unit.
- Repairs to electrical equipment should only be performed by a qualified service person. Improper repairs may place users at risk and void warranty.
- Do not puncture or harm the exterior surface of the product in any way.
- Do not drop or let the unit fall from high places, as doing so may damage the device.
- Do not use this unit for anything other than its intended use or purpose. Doing so may damage the device and void the warranty.
- This product is not a toy. Keep out of reach of children.
- Do not expose batteries or battery packs to excessive heat or open flame.
- Do not expose the unit to extremely high or low temperatures as this will shorten the life of the device, destroy the battery, and/or distort certain parts.
- Do not use abrasive cleaning solvents to clean the unit.
- In order to prolong battery life, turn it off when not in use.
WARNINGS
Any changes or modifications not expressly approved by the party responsible for compliance could void this user’s authority to operate the equipment.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a wireless power charger, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
product. This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
SUPPORT: 877-543-3540
WWW.MONSTER-AUTO.COM
©2021 Lifeworks Technology Group LLC. New York, NY 10018. The M Monster® logo
is a trademark used under the license of Monster®, Inc. All rights reserved.
manufactured, marketed and distributed by Lifeworks Technology Group LLC. Made
in China. All other brands are registered trademarks of their respective
companies.
California Proposition 65 Warning:
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Google Play and the Google Play logo are trademarks of Google LLC.
Apple and the Apple logo are registered trademarks of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
Photos & illustrations may differ slightly from the actual product & are for
demonstration purposes only. Color & lighting effects are enhanced for
packaging.
3MNLA0638B0G7 (4pc Multicolor Smart LED Light Strips w App)
– User Manual
– Glossy paper
– Black ink only
– Double side print
Documents / Resources
|
Shenzhen Kingsun Enterprises LT-1475 Bluetooth RGB LED Strip
Light
[pdf] User Manual
LT-1475, LT1475, 2AAPKLT-1475, 2AAPKLT1475, LT-1475 Bluetooth RGB LED Strip
Light, Bluetooth RGB LED Strip Light, Strip Light
---|---