PCE Instruments PCE-HT 70 Thermo Hygrometer User Manual

: June 12, 2024
: PCE Instruments

Table of Contents

PCE-HT 70 Thermo Hygrometer
Safety notes
Specifications
Delivery scope
Device description
Battery
Switching the meter on/off
Software
Contact
Disposal
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
PCE-HT 70 Thermo Hygrometer

PCE-HT 70 Thermo Hygrometer

PCE Instruments PCE HT 70 Thermo Hygrometer - qr User manuals in various languages can be found by using our product search on: www.pce-instruments.com

Last change: 3 September 2020
v1.0
© PCE Instruments

Safety notes

Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non- observance of the manual are excluded from our liability and not covered by our warranty.

The device must only be used as described in this instruction manual. If used otherwise, this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative humidity, …) are within the ranges stated in the technical specifications. Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualified PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specifications must not be exceeded under any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to the user.

We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments. The contact details can be found at the end of this manual.

Specifications

Measured variable| Measurement range| Accuracy| Measurement/ storage rate
---|---|---|---
Temperature| -40 … 85 °C| ±0.5 °C (0 … 70 °C) ±0.8 °C (-20 … 0 °C)| 1 s … 15 days
Relative humidity| 0 … 100 % RH| ±3 % RH
(10 … 90 % RH)
±4 % RH (remaining range)| 1 s … 15 days
Further specifications
Drift| Temperature: 0.03 °C / year Humidity: 0.25 % RH / year
Response time| 2 minutes
Memory capacity| max. 16,000 measured values
Power supply| CR2032 battery
Battery life| approx. 450 days (@25 °C / 15 min storage rate)
Environmental conditions| -40…+85 °C
Protection class| IP30
Dimensions| 69.5 x 47.5 x 18.7 mm
Weight| 44 g

Delivery scope

1 x thermo hygrometer PCE-HT 70
1 x wall bracket
1 x CR2032 battery
1 x instruction manual

Device description

PCE Instruments PCE HT 70 Thermo Hygrometer - Device description
1

No.	Description
1	USB connection cap
2	On/off key
3	Connections for the temperature and humidity sensor
4	LED indicator
5	Battery compartment
6	USB interface
7	Screw holes for the wall bracket
8	Adhesive tape

Battery

To insert a battery, first open the battery compartment. Then insert a CR2032 button battery into the cap. You can then close the battery compartment. You can check the battery voltage using the software. When inserting the battery, pay attention to the polarity of the battery.

Switching the meter on/off

To switch on the data logger, press and hold the on/off key for 2 seconds. The LED indicator then lights up as soon as a measured value is saved. You can configure this in the software. To switch off the data logger, press and hold the key again for 2 seconds.

Software

To put the test instrument into operation, first download and install the software “PCE-HT 70” from our download page.
https://www.pce-instruments.com/english/download-win_4.htm
Instructions for operating the software are provided in the software.

Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact us. You will find the relevant contact information at the end of this user manual.

Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations.
If you have any questions, please contact PCE Instruments.

www.pceinstruments.com PCE Instruments contact information

United Kingdom
PCE Instruments UK Ltd
Unit 11 Southpoint Business Park
Ensign Way, Southampton
Hampshire
United Kingdom, SO31 4RF
Tel: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
[email protected]
www.pce-instruments.com/english|

United States of America
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter / Palm Beach
33458 FL
USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
[email protected]
www.pce-instruments.com/us

---|---