TDK AEC-Q200 Balun Transformers Wound SMD Owner’s Manual

TDK AEC-Q200 Balun Transformers Wound SMD

Product Information

The RF Components Balun transformers Wound SMD ATB series are AEC-Q200 compliant transformers designed for various applications including in-vehicle TV and mobile device tuners, STB/tuner power dividers, and more. The specific model mentioned in the manual is the ATB2012V type. The features of the ATB2012V type include RoHS compliance, lead-free construction, and being free from Cl, Br, REACH Halogen, SVHC, and Pb substances. The part number construction of the ATB2012V-75011-T01 model indicates that it has L x W dimensions of 2012V, an input impedance of 750 ohms, an impedance ratio of 1:1, and an internal code of 01.

The characteristics specification table provides further details on the product:

• Frequency range: 50 to 1000 MHz
• UB/B Impedance: 75/75 ohms
• Insertion loss (maximum): 1.2 dB
• DC resistance (maximum): 0.7 ohms
• Rated current: 100 mA
• Measurement equipment for various parameters: DC resistance –
• Product No. 4338A, Insulation resistance – Product No. 4339A,
• Insertion loss/Return loss/Amplitude imbalance/Phase balance –
• Product No. E5071B
• Rated voltage: 20 V
• Insulation resistance (minimum): 10 M ohms

The package quantity for the product is 2000 pcs/reel, and the individual weight is 10 mg.

Product Usage Instructions

To use the ATB2012V type balun transformers, follow these instructions:

1. Ensure that you have the proper delivery specifications for detailed features and specifications of the product.
2. Check the frequency range requirement of your application and confirm that it falls within the specified range of 50 to 1000 MHz.
3. Verify the input impedance requirement and ensure it matches the 75 ohms impedance of the transformer.
4. Consider the insertion loss specification and make sure it does not exceed 1.2 dB for your intended use.
5. Take note of the DC resistance and ensure it does not exceed 0.7 ohms.
6. Check the rated current and confirm that it meets your application’s requirements.
7. Use the specified measurement equipment to measure parameters such as DC resistance, insulation resistance, insertion loss, return loss, amplitude imbalance, and phase balance if needed.
8. Ensure that the rated voltage does not exceed 20 V.
9. Consider the recommended land pattern for PCB layout and follow it for proper mounting of the balun transformer.
10. Refer to the recommended reflow profile for soldering guidelines during assembly.
11. Store the product within the specified temperature range for proper storage conditions.

Please note that it is important to request delivery specifications for comprehensive information and to ensure proper and safe use of the product. Additionally, be aware that the contents of the manual may change without prior notice due to upgrades or other reasons.

• Balun transformers
• Wound SMD
• ATB series

FEATURES

• The ATB2012 case size is L2.0×W1.2.
• The case size is smaller than conventional Baluns.
• Low insertion loss and good balance parameters.
• Operating temperature range: –40 to +105°C
• Compliant with AEC-Q200

APPLICATION

• In-vehicle TV and mobile device tuners (DVB-T/H, ISDB-T, etc.)
• STB / tuner power divider

PART NUMBER CONSTRUCTION

CHARACTERISTICS SPECIFICATION TABLE

Frequency

range

| UB/B

Impedance

| Insertion

loss

| DC

resistance

| Rated

current

| Rated

voltage

| Insulation

resistance

|

Part No.

---|---|---|---|---|---|---|---
(MHz)| ( W )| (dB)max.| ( W )max.| (mA)| (V)| (M W )min.|
50 to 1000| 75/75| 1.2| 0.7| 100| 20| 10| ATB2012V-75011-T01

Measurement equipment

|
---|---
Measurement item| Product No.| Manufacturer
DC resistance| 4338A| Keysight Technologies
Insulation resistance| 4339A| Keysight Technologies
Insertion loss| E5071B| Keysight Technologies
Return loss| E5071B| Keysight Technologies
Amplitude imbalance| E5071B| Keysight Technologies
Phase balance| E5071B| Keysight Technologies

Equivalent measurement equipment may be used.

• Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
• Please note that the contents may change without any prior notice due to reasons such as upgrading.

FREQUENCY CHARACTERISTICS

ATB2012V-75011-T01

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

CIRCUIT DIAGRAM

RECOMMENDED REFLOW PROFILE

PACKAGING STYLE

REEL DIMENSIONS

TAPE DIMENSIONS

PACKAGE QUANTITY

• Package quantity 2000 pcs/reel

TEMPERATURE RANGE, INDIVIDUAL WEIGHT

Operating

temperature range

| Storage

temperature range *

| Individual

weight

---|---|---
–40 to +105°C| –40 to +105°C| 10 mg

The storage temperature range is for after the assembly.

REMINDERS FOR USING THESE PRODUCTS

• Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS

Please pay sufficient attention to the warnings for safe designing when using this products.

REMINDERS

• The storage period is within 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less).
• If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
• Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
• Before soldering, be sure to preheat components.
• The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C.
• Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
• If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
• When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
• Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design.
• Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
• A malfunction may occur due to magnetic interference.
• Use a wrist band to discharge static electricity in your body through the grounding wire.
• Do not expose the products to magnets or magnetic fields.
• Do not use for a purpose outside of the contents regulated in the delivery specifications.
• The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us.

1. Aerospace/aviation equipment
2. Transportation equipment (cars, electric trains, ships, etc.)
3. Medical equipment
4. Power-generation control equipment
5. Atomic energy-related equipment
6. Seabed equipment
7. Transportation control equipment
8. Public information-processing equipment
9. Military equipment
10. Electric heating apparatus, burning equipment
11. Disaster prevention/crime prevention equipment
12. Safety equipment
13. Other applications that are not considered general-purpose applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgradin.

References

• ATB2012V-75011-T01 : Detailed Information | RF Components - Baluns | TDK Product Center
• Baluns | TDK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>