DREO DR-HTF008 Tower Fans User Manual

DREO DR-HTF008 Tower Fans

Product Information

Specifications:

• Model: DR-HTF008
• Dimensions: 105 x 150 mm
• Weight: 80g
• Power: 80g
• Product Code: 202301

Manufacturer:

Website : www.dreo.com

Product Usage Instructions

Assembling Your Tower Fan:
Please refer to pages 1-2 of the user manual for detailed instructions on how to assemble your tower fan.

Knowing Your Tower Fan:
Read pages 6-7 of the user manual to understand the different features and functions of your tower fan.

Using Your Tower Fan:
Follow the instructions on pages 8-10 of the user manual to safely operate your tower fan. Some important points to remember:

• Do not cover the air inlet and outlet while the fan is in operation.
• Do not use the fan with combustibles.
• Do not immerse the fan in water or any other liquids.
• Make sure to install the base before using the appliance.
• Avoid dismantling, repairing, or modifying the fan. All servicing should be performed by authorized personnel.
• Ensure that the voltage of your electricity supply matches the indicated voltage on the appliance.
• Always unplug the fan before cleaning or leaving it unused for a long period. Keep your hands dry when plugging/unplugging.
• Do not operate the fan with a damaged cord or plug. Return it to an authorized service facility for examination and/or repair.
• Avoid running the cord under carpeting or covering it with throw rugs, runners, or furniture to prevent tripping hazards.
• Do not use any solid-state speed control device with the tower fan.
• Do not use replacement parts that have not been recommended by the manufacturer.

Cleaning and Maintenance:
Refer to pages 11-13 of the user manual for detailed instructions on how to clean and maintain your tower fan.

Troubleshooting:
If you encounter any issues with your tower fan, please refer to page 14 of the user manual for troubleshooting tips.

Contact Information:
If you need further assistance or have any questions, please contact DREO customer support:

• Email: support@dreo.com
• Phone: 888-290-1688
• Website: www.dreo.com
• Support Hours: Mon – Fri, 9:00 am-5:00 pm PST/PDT

Thank you for choosing DREO! Your satisfaction is important to us.

Extend Your Warranty for Free:
To extend your warranty for free, scan the QR code or visit www.dreo.com/warranty and register your product. If you have any product issues, our support team is ready to assist you.

• Phone : 888-290-1688
• Support Hours : Mon – Fri, 9:00 am-5:00 pm PST/PDT
• Email : support@dreo.com
• Website : www.dreo.com

IMPORTANT SAFETY INSTRUCTIONS

READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.

• Do not cover the air inlet and outlet while in operation.
• Do not use the fan near flammable and combustibles.

General Safety

1. Children shall not play with the appliance. Cleaning and maintenance shall not be performed by children without supervision.
2. Use the appliance as described in the user manual only. Any other use of personal injury.
3. This appliance can be used by children aged above 8 years and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of this appliance in a safe way and understand the hazards involved.

Operation Safety

1. Place the appliance on a flat, dry surface before use.
2. Do not immerse in water and any other liquids.
3. Do not use the appliance until the base is installed.
4. Do not insert your fingers, pencil, or any other objects into the grilles while in operation.
5. Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.

Electricity Safety

1. Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
2. Always unplug before cleaning or leaving the appliance unused for a long period. Keep your hands dry when plugging/unplugging.
3. Do not operate any fan with a damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and/or repair.
4. Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.
5. WARNING : To reduce the risk of fire or electric shock, do not use this tower fan with any solid-state speed control device.
6. This appliance employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions and check the appliance. If the replacement fuse blows, a short-circuit may be present and the appliance should be discarded or returned to an authorized service facility for examination and/or repair.
7. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way, If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

WARNING : To reduce the risk of fire, electric shock, or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. Parts made at home using a 3D printer).

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder:
Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:

• The power cord or plug is damaged.
• Loud noise, unusual smell, or excessive heat.

Specifications

• Model : DR-HTF008
• Input: AC 120V 60Hz
• Rated Power : 45W
• Battery Type : CR2025

ASSEMBLING YOUR TOWER FAN

Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the parts by following the steps below.

1. Keep two base halves in a crossed position, then insert pegs on one half onto the slots on the other half.
2. Press down on the edges to click two base halves together.
3. Run the cord through the center hole.
4. Fit the base onto the bottom of the fan by aligning the arrows on the underside.
5. Rotate the base clockwise to lock it in place.
6. Thread the cord through all REAR cord keepers before putting the fan upright.

CAUTION

• Do not operate the tower fan if the base has not been installed.
• Make sure to thread the cord through all rear cord keepers.

Package Contents

KNOWING YOUR TOWER FAN

Control Panel

• Mode Button
  Switch between Normal/Natural/Sleep/Auto Mode

• Fan Speed Button
  Adjust airflow volume (1-5 levels)

• Power Button
  Turn power on/off

• Timer Button
  Select to set a timer (0-12h)

• Oscillation Button
  Adjust airflow direction

• Mute Button
  Turn on/off button sounds

LED Display

NOTE:

• The display will turn off after 1 minute (after 5 seconds in sleep mode).
• Wake up the display with any button.
• The display will not turn off when the auto-on timer is enabled.

Getting the Most out of Your Tower Fan

1. It’s not an air conditioner.
2. Remove any tall obstacles that might block
3. Combine with your AC unit to get cooler air throughout the room.
4. Position the tower fan closer to you to get
5. Place a bucket of ice in front of the fan for an extra cooling boost.

USING YOUR TOWER FAN

General Operations

Working Modes

Sleep Mode
(Mute Auto On)

Fan speed decreases every 30 minutes. Speed decreases by two levels at most and will remain constant if at level 1:

• For level 5: 5 4 3
• For level 4: 4 3 2
• For level 3: 3 2 1
• For level 2: 2 1
• For level 1: 1

Auto Mode
Fan speed adapts to the ambient temperature.

Normal Mode
The fan runs at a constant speed.

Natural Mode
The fan runs at alternating speeds.

Additional Features

• Timer
  When the fan is ON/OFF, touch the timer button repeatedly to set a timer from 1 to 12 hours. When the timer ends, the fan will stop/start running automatically. To cancel, set the time to 0 hours.

  • Note : When the auto-off timer is enabled, the display will return to fan speed after 3 seconds.

• Mute
  Touch the mute button ****to turn on/off the button sounds.

• Memory
  If the fan is turned OFF or disconnected from power, it will operate under the previous settings (except the timer setting) when it is turned ON again.

Remote Control

Battery Replacement

1. Press the locking button to pop out the battery holder.
2. Replace with the same battery type with the (+) side facing up.
3. Push in the holder until securely locked into place.

Note : If the indicator on the remote control doesn’t turn on anymore, please consider replacing the battery.

WARNING: Chemical Burn Hazard. Keep batteries away from children.

This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
The cells must be disposed of properly, including keeping them away from children. Even used cells may cause injury.

CLEANING AND MAINTENANCE

• Outer Surface
  Gently wipe off the dust with a soft, dry cloth.

• Base
  Press on the lock sign here and rotate counterclockwise to release the base from the fan, then press the tabs on the edges to detach the base halves from each other.

CAUTION

1. Always unplug the fan before any cleaning or maintenance
2. Do not immerse in water or get water inside the motor housing.
3. Do not use any chemical agents when cleaning the fan.
4. Store in a cool, dry place and cover it to protect it from dust.

Rear Grille

WARNING
Turn off the appliance and unplug it before any cleaning and maintenance.

1. Remove the screw on the top of the rear grille with a Philips screwdriver.
2. Lift the grille and pull it out.
3. Clean the dust on the blades using a vacuum cleaner or air duster. Rinse the rear grille under running water or with a clean, damp cloth.
4. Dry up, then install the grille and the screw back in place, making sure the bottom pegs are fully inserted into the slots.

User Servicing Instructions (Fuse)
This appliance features a fused safety plug that protects against overload o short-circuit situations. If the fuse blows, please cut off power and follow the below instructions or consult a qualified electrician.

1. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove the fuse carefully. Push the fuse from the other side to remove the fuse.
4. Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of the attachment plug.

WARNING
Risk of fire. Do not replace the attachment plug. Contains a safety device(fuse) that should not be removed. Discard the product if the attachment plug is damaged.

TROUBLESHOOTING

My fan won’t turn on!

1. Make sure that the cord is connected to a powered outlet and that the mains voltage corresponds with the voltage indicated on the fan.
2. Check if the fuse has blown. If the fuse has blown,

My fan is shaky and wobbling!

1. Place the fan on a flat, level surface.
2. Incorrect installation might also cause shakiness. Please refer to the assembly instructions on pages 3-4. Note that the power cord must be run through all three keepers.

My fan is making vibration and noise!

1. Place the fan on a flat, level surface.
2. Be sure not to insert anything into the air inlet and outlet.

If your problem is not listed or persists, please contact our Customer Support

DREO CUSTOMER CARE

Default 12-Month Warranty

This appliance is covered by a Dreo warranty for 12 months from the date of its original purchase.

Extend Your Warranty
Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.

The warranty will not apply in cases of:

1. Accidents, misuse, or repairs performed by unauthorized personnel.
2. Any unit that has been tampered with or used for commercial purposes.
3. Normal wear and tear of wearable parts.
4. Use of force, damage caused by external influences.
5. Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
6. Partially or completely dismantled appliances.
7. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo.

We can only provide after-sales service for products that are sold by Dreo or Dreo-authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues. 888-290-1688 support@dreo.com www.dreo.com

www.dreo.com Shenzhen Hesung Innovation Technology Co., LTD 26F, Bldg A7, Creative City, Shenzhen, China

MADE IN CHINA

5018396

References

• Dreo Warranty Activation
• Dreo - Elevating Smart Living | Dreo Official Brand Website
• Dreo Warranty Activation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>