timberk T-SF1601RC Stand Fan Instruction Manual
- June 12, 2024
- TIMBERK
Table of Contents
INSTRUCTION MANUAL STAND FAN
T-SF1601RC
Dear customer!
We thank you for your wise choice and for a purchase of a stand fan. It
will serve you for a long time.
IMPORTANT INFORMATION
Please, read this manual before using the device. This manual contains
important information regarding your safety, as well as recommendations
concerning the correct use and maintenance of this appliance. Keep this manual
together with a warranty card, cash register receipt and, if possible, carton
and packaging material. This instruction manual describes different types of
this device. The device you purchased may differ slightly from the description
in the manual, which does not affect the methods of use and operation. The
manufacturer reserves the right to make minor changes to the device without
additional notice which is not fundamentally affect its safety, performance
and functionality. There may be some misprints in text and digital notations
in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include
all possible situations that you may experience using the device. The
manufacturer is not responsible for damage of the appliance or its parts
during transportation, as a result of incorrect installation or voltage
fluctuations, as well as when any part of the appliance has been changed or
modified.
NOTE
There is a label on the device which has all the necessary technical data and
other useful information about the device. Use the appliance only for the
purpose specified in this manual.
SAFEGUARDS
When using an electric stand fan, a number of safety precautions must be
observed.
Improper operation by ignoring safety precautions can result in damage to the
health of the user and other people, as well as damage to their property.
-
Important safeguards. read carefully and keep for future reference.
-
Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
-
Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the mains voltage in your home.
-
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
-
Do not use outdoors or in damp area.
-
The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
-
Children must be under control in order not to be allowed to play with the appliance.
-
Always unplug the appliance from the power supply before cleaning and when not in use.
-
To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center. -
Do not use the device in bathrooms and near water.
-
Do not place the appliance near heat sources.
-
Do not leave the appliance switched on when not in use.
-
Do not use other attachments than those supplied.
-
In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
-
Keep the cord away from sharp edges and hot surfaces.
-
Do not pull, twist, or wrap the power cord around the appliance.
-
Avoid contact with moving parts of the device. Do not put pencils or other objects through the protective grid of the fan.
-
Do not operate without fan installed protective grid.
-
Ensure that the fan is switched off from the supply mains before removing the guard.
-
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
-
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
-
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
APPOINTMENT OF THE DEVICE
The device is intended for air circulation in the room.
SPECIFICATIONS
| Parameter | Units | Technical parameters |
|---|---|---|
| Diameter | / cm | 16 / 40 |
| Power | W | 45 |
| Voltage / frequency | V/ Hz | 220-240~/ 50 |
| Electrical safety class | – | Class II |
| Net weight | kg | 2.5 |
| Dimensions (WxDxH) | mm | 520x520x1250 |
DEVICE DESCRIPTION
*The
appearance of the device may differ from the images in the manual
- Front grille
- Grille clips
- Blade cap
- Blades
- Rear grille nut
- Rear grille
- Oscillating knob
- Motor
- Motor shaft
- Control box
- Screw B
- Screw
- Vertical adjustment screw
- Stand cover
- Extension pole
- Out-joint
- Stand tube
- Stand base
- Switch mode buttons
- Remote control
DELIVERY SET
- Stand fan – 1 pc.
- Instruction manual – 1 pc.
- Warranty card – 1 pc.
- Packing – 1 pc.
- Remote control- 1 pc.
ASSEMBLING INSTRUCTIONS
- Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and included into the set.
- Do not plug in the device before its assembling is finished.
- Tighten stand tube to stand base with screw. Fix base cover to stand base with a screw (supplied with a set).
- Unscrew out-joint, put the stand cover and base cover on the stand base, pull the extension pole out then tighten the out-joint again.
- Place control box firmly on top of extension pole, tighten screw B.
- Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and put both blade cap and rear grill nut off the motor shaft.
- Put rear grille on motor shaft.
- Secure it with rear grille nut.
- Slide blades on motor shaft so that claws on motor shaft match the blades slots.
- Screw blade cap on shaft by turning counter clockwise.
- Put front grille on rear grille and close clips or screw grille ring to secure grilles together.
- Adjust the fan vertically by vertical adjustment screw.
- The fan is ready for work.
OPERATION MANUAL
-
Place fan only onto dry flat unyielding surface.
BUTTONS: -
ON/SPEED – button switches the fan on and shifts between different speeds. Press button 1 for a low speed, 2 for a medium speed and 3 for a high speed.
-
OFF – turning off the fan
LIGHT INDICATORS: -
0.5h…4h – fan operating time set
-
H – high speed;
-
M – middle speed;
-
L – minimum speed;
REMOTE CONTROLLER: -
Mode settings can be made manually by using switch mode buttons on control box or by using remote controller:
-
ON/SPEED – button switches the fan on and shifts between different speeds.
-
OFF – turning off the fan
-
Mode button helps to choose operating mode of fan.
– Normal – air stream at constant rate
– Nature – air stream by intense waves
– Sleep – air stream by weak waves. The fan will operate at high speed in Nature mode for 30 minutes, the at medium speed in Nature mode for 30 minutes, and then it will operate at low speed in Nature mode for remaining time. -
Timer button helps to adjust fan operating time up to maximum time of 7 hours and a half. Each pressing of this button adds half an hour of fan operating time. For example, if you wish to set operating time of 5 hours and a half, you need to do the following:
Press the button “Timer” several times and see on display: 0.5h, 1h, 4h, that means you have set 5.5h.
NOTE: The remote control is powered by two 1.5 V AAA batteries.
Batteries for the remote control are not included in the kit.
MAINTENANCE
- Before cleaning unplug fan first.
- Clean front and rear grilles, blades, stand tube and stand base with soft moistened cloth and wipe dry.
- Do not use abrasive cleansers
STORAGE
- Keep the device in normal conditions in dry place.
UTILIZATION RULES
**** The symbol on the unit, packing materials and/or documentations means
used electrical and electronic units should not be toss in the garbage with
ordinary household garbage. These units should be pass to special receiving
point.
For additional information about actual system of the garbage collection
address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work
on the public health and environment which happens with incorrect using
garbage.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>