Dainolite CST-196LEDT Black Desk Lamp with Shade Instruction Manual
- June 2, 2024
- Dainolite
Table of Contents
Dainolite CST-196LEDT Black Desk Lamp with Shade
CST-196LEDT
IMPORTANT SAFTEY INSTRUCTIONS
-
The LED bulb has been permanently installed into this lamp.
The LED bulb does not need to be replaced. Do no attempt to remove or replace the LED bulb. -
Although LED bulbs do not get as hot as traditional light bulbs, they still generate some heat. Avoid touching the LED bulb.
-
Do not try to modify the plug, cable, adaptor or LED bulb.
-
Use a soft cloth when cleaning the lamp. Do not use chemical or abrasive cleaners
-
These important safety warnings do not cover all possible conditions or srtih. nations that may occur. Please take care when using this product.
CAUTION:
- Ensure power is turned off before assembling
- Insert plug from adaptor into lamp base
- Adjust angle and desired height of the lamp by moving the shade
- Plug adaptor into power outlet and turn on switch
CALIFORNIA PROPOSITION 65 WARNING – WARNING:
This may contain one or more chemicals known to the State of California to or
other reproductive harm. Wash hands artier
Warning/Attention
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
DO NOT RETURN PRODUCT TO THE RETAILER.
For Warranty
Contact the factory directly in writing: Email dainolite@dainolite.ca . Include a copy of your purchase invoice and describe the defect. A factory person will contact you directly to advise what further action will be taken.
For missing hardware or broken glass:
Contact the factory directly in writing: Email
dainolite@dainolite.ca . The missing or broken
parts will be shipped to you directly the same day artier receipt of your
email (weekend excluded).
1401 Courtney Park Drive East, Mississauga, Ontario, Canada L5T 2E4
Tel: 905-564-1262
Fax: 905-564-1299
Email: dainolite@dainolite.ca
Web: www.dainolite.ca