Siretta Routers Enabling Industrial IoT User Guide
- July 13, 2024
- Siretta
Table of Contents
Siretta Routers Enabling Industrial IoT
Specifications
- Product Name: Siretta Routers
- Model: QUARTZ-GW22-UMTS (EU) 3G router
- Available Models: QUARTZ, QUARTZ-LITE, QUARTZ-COMPACT
- Common Accessories:
- Ethernet Cable
- Power Adaptor
- Cellular Antenna
- Power Cable and Connector (QUARTZ Series only)
- DIN Rail Adaptor (QUARTZ and QUARTZ-COMPACT Series only)
- Optional Accessories:
- WiFi Antenna (For routers with WiFi option)
- GPS Antenna (For routers with GPS option)
Whats in the Box?
This quick start guide is intended for all Siretta routers. For reference, we
have used a QUARTZ-GW22-UMTS (EU) 3G router.
As standard, you will receive one of the following routers:
Common Accessories
If you ordered a router with accessories, you will also receive the
following items:
NOTE – For LTE routers, the kit may be supplied with an additional cellular antenna. This means the router is capable of MIMO (Multiple Inputs, Multiple Outputs) cellular communication.
Optional Accessories
If you ordered a router with accessories and have opted for either WiFi
and/or GPS variants, then you will also receive one or both of the following
items:
Product Usage Instructions
-
SIM Card Installation:
-
Use a screwdriver to open the SIM cover on the router.
-
Insert a SIM card fully into the SIM slot and close the cover securely.
-
Antenna Connections:
Screw the cellular antenna to the main antenna connector on the router. For WiFi and GPS routers, connect the respective antennas to their designated connectors. -
LAN Connection:
Connect one end of the Ethernet cable to the router LAN port and the other end to an Ethernet port on your PC. -
Power Connection:
-
For QUARTZ-LITE: Use the plug-top power supply with the 2.1mm centre pin connector.
-
For QUARTZ & QUARTZ-COMPACT: Plug the green power connector on the adapter cable into the router.
-
Select the appropriate power adaptor connector for your geographical location (UK/EU/USA/AU) and plug it into the mains.
-
Switch on the power and refer to the LED indications table for status.
Additional Items
You will require the following items for configuring your router:
- 3G or 4G SIM card with APN details
- Screwdriver to open the SIM cover
- PC to configure the router
NOTE – Please ensure your antenna and SIM card are appropriate for the router you are using.
-
Step 1:
-
SIM: Use a screwdriver to open the SIM cover on your router.
-
Step 2:
-
SIM: Insert a SIM card fully into the SIM slot. Close the SIM cover, ensuring it is screwed back into place
-
Step 3:
ANTENNA CONNECTIONS: Screw the cellular antenna to the main antenna connector on the router. Twist the antenna connector clock-wise until the antenna is firmly connected. -
If you have a WiFi router, connect the WiFi antenna to the WiFi antenna connector on the router. If you have a GPS router, connect the GPS antenna to the GPS antenna connector on the router. If you have an LTE router that has been supplied with a 2nd cellular antenna for MIMO, then attach this to the AUX connector on the router.
-
Step 4 :
-
LAN CONNECTION: Connect one end of the Ethernet cable into the router LAN port, connect the other end of the cable into an Ethernet port on your PC.
-
Step 5: POWER:
-
For QUARTZ-LITE: Plug the plug-top power supply into your router using the 2.1mm centre pin connector.
-
For QUARTZ & QUARTZ-COMPACT: Plug the green power connector on the power adapter cable into the router as shown below. The example shown is for the QUARTZ model. A similar concept applies to the QUARTZ-COMPACT. Plug the 2.1mm centre pin connector from the plug-top power supply in to the other end of the power adapter cable.
-
Step 6:
-
POWER: Select connector type for your power adaptor depending on your geographical location (UK/EU/USA/AU). Plug the power adaptor to the mains.
-
Step 7:
-
POWER: Switch on the power. See table below for LED indications when router is powered on.
Table 1. Router LED indication -
Step 8:
-
LOG IN: Obtain the default IP address, username and password of your router. You can find this on the silver label on the back of your router. Type in the IP address of your router into your PC browser. When prompted for your username and password use the following:
These credentials are factory defaults. You can set your own username and password in the router settings. -
Step 9: APN SET-UP: On successful login, navigate to the Basic Network > Cellular tab. When you arrive at the ‘Cellular Settings’ page, you will need to enter the APN details for the network provider of your SIM card. In the image below, we have used the APN details relevant for “EE”.
These being: -
APN: everywhere
-
Username: eesecure
-
Password: secure You are not required to enter any ‘Proxy’ or ‘Port’ details.
-
Step 10:
-
CONNECTING TO NETWORK: Click “Save”. Your router will reboot itself. The router will then connect to the network and is ready for use with your application. NOTE – If you cannot access the router GUI, please check your local area network settings.
Further Information
For more information when using your router, a range of application notes,
hardware and software user manuals are available to download. You can request
these from your Siretta representative, alternatively these can be downloaded
from www.siretta.com
sales +44 (0)118 976 9000
email sales@siretta.com
www.siretta.com
- Siretta Ltd
- Basingstoke Road
- Spencers Wood
- Reading
- Berkshire
- RG7 1PW
- United Kingdom
Company No. 08405712
VAT Registration No. GB163 04 0349
FAQ
Q: What should I do if the PWR LED is off?
A: Ensure the power adaptor is connected correctly and mains power is switched
on.
Q: How do I know if WiFi is enabled?
A: Check if the WLAN LED is green when ON; if it is off, WiFi may not be
enabled or supported.
Q: When should I use the AUX connector for LTE routers?
A: If your LTE router is supplied with a 2nd cellular antenna for MIMO, attach
it to the AUX connector on the router.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>