MSI G241V E2 Optix Series Gaming LCD Monitor User Manual

MSI G241V E2 Optix Series Gaming LCD Monitor

Copyright and Trademarks Notice

Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.

Revision

• Revision Date
• V1.1 2020/11

Technical Support

If a problem arises with your product and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.

Safety Instructions

• Warning! Overuse of screens is likely to affect eyesight.
• Recommendations:

1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day.

CE Conformity

This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of the Official Journal of the European Union.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

1. Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Notice 2 Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626)913-0828 www.msi.com

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides information on chemical substances in products at: https://www.msi.com/html/popup/csr/evmtprtt_pcm.html

RoHS Statement

Japan JIS C 0950 Material Declaration

A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006.

• https://www.msi.com/html/popup/csr/cemm_jp.html
• https://tw.msi.com/html/popup/csr_tw/cemm_jp.html

India RoHS

This product complies with the “India E-waste (Management and Handling) Rule 2016” and prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Turkey EEE Regulation

Conforms to the EEE Regulations of the Republic Of Turkey

Ukraine Restriction of Hazardous Substances

The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of the Ministry of Ukraine as of December 3, 2008, № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

Vietnam RoHS

As of December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products

Getting Started

This chapter provides you with information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.

IMPORTANT

• The illustrations are for reference only. Your monitor may vary in appearance.
• Do not use any sharp objects on the monitor.

Package Contents

1. Monitor
2. Stand
3. Stand Base with Screw
4. Stand Screws x4
5. VESA Cover
6. Power Adapter & Power Cord
7. HDMI Cable (Optional)
8. DisplayPort Cable (Optional)
9. Quick Start Guide
10. Warranty Card

• Contact your place of purchase or local distributor if any of the items are damaged or missing.
• Package contents may vary by country.

Installing the Monitor Stand

IMPORTANT

Place the monitor on a soft, protected surface to avoid scratching the display panel.

1. Align the latches of the stand to the monitor.
2. Tighten the stand with the stand screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Align the latches to place the VESA cover.

IMPORTANT

The holes for installing the stand can be also used for a wall mount. Please contact your dealer for a proper wall-mount kit.

Adjusting the Monitor

This monitor is designed to maximize your viewing comfort with its adjustment capabilities.

IMPORTANT

Avoid touching the display panel when adjusting the monitor.

Monitor Overview

1. Power Button
2. Power Jack
3. DisplayPort
4. HDMI Port
5. Headphone Jack
6. Navi Key
7. Kensington Lock

Connecting the Monitor to the PC

1. Turn off your computer.
2. Connect the HDMI/DisplayPort cable from the monitor to your computer.
3. Assemble the monitor power adapter & power cord. (Figure A)
4. Connect the power adapter to the monitor power jack. (Figure B)
5. Plug the power cord into the electrical outlet. (Figure C)
6. Turn on the monitor. (Figure D)
7. Power on the computer then the monitor will auto-detect the signal source.

OSD Setup

This chapter provides you with essential information on OSD Setup.

IMPORTANT

All information is subject to change without prior notice.

Navi Key

The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu.

The Navi Key default settings are as follows.

Users may enter the OSD Menu to customize their own Navi Key Hot Keys. More Hot Key options are as below.

OSD Setup via Navi Key

Press the Middle button of the Navi Key to launch the On-Screen Display (OSD) main menu. Use the Up, Down, Left, and Right buttons to tune the desired function menus to suit your personal preferences.

GAMING

■   Use Up or Down Button to select and preview mode effects.

■   Press the Middle Button to confirm and apply your mode type.

Night Vision| OFF| ■   This function optimizes background brightness and is recommended for FPS games�
Normal
Strong
Strongest
AN�I�
Response Time| Normal| ■   Users can adjust Response Time in any Mode

■   Response Time will be grayed out while Anti Motion Blur is enabled

Fast
Fastest
1st Level Menu| 2nd/3rd Level Menu| Description
---|---|---
Refresh Rate| Location| Left Top| ■   Users can adjust Refresh Rate in any Mode

■   Default Refresh Rate Location is Left Top Location is adjustable in OSD Menu Press the Middle Button to confirm and apply your Refresh Rate Location

■   This monitor follows and works at the Operating System’s preset Screen Refresh Rate

Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock| Location| Left Top| ■   Users can adjust Alarm Clock in any Mode

■   After setting the time, press the Middle Button to activate the timer

■   Default Alarm Clock Location is Left Top Users can select their own location

Right Top
Left Bottom
Right Bottom
OFF
15:00| 00:01~99:59
30:00
45:00
60:00
Screen Assistance| None| | ■   Users can adjust Screen Assistance in any Mode

■   Screen Assistance default is None

Icon
FreeSync| | ■   FreeSync prevents screen tearing

■   DisplayPort or HDMI default is OFF and can adjust to be ON/OFF in any mode, any resolution, any input source, and any screen refresh rate

■   Anti Motion Blur will be disabled if FreeSync is enabled

Professional

■   Use the Up or Down Button to select and preview mode effects.

■   Press the Middle Button to confirm and apply your mode type.

Eye Saver|  (OFF)| ■   Eye Saver protects your eyes against blue light When enabled, Eye Saver adjusts the screen color temperature to a more yellow glow

■   Users can adjust Eye Saver in any Mode

■   When Pro Mode is set to Reader, it is mandatory to enable Eye Saver

 (ON)
1st Level Menu| 2nd Level Menu| Description
---|---|---
HDCR|  (OFF)| ■   Users can adjust HDCR in any Mode

■   HDCR enhances image quality by increasing the contrast of images

■   When HDCR is set to ON, Brightness will be grayed out

■   HDCR and Anti Motion Blur cannot be enabled simultaneously

 (ON)
Image Enhancement| OFF| ■   Image Enhancement enhances image edges to improve their acutance

■   Users can adjust Image Enhancement in any Mode

Weak
Medium
Strong
Strongest

Image

Reader mode

■   Brightness will be grayed out when Anti Motion Blur

or HDCR is enabled

Contrast| 0-100| ■   Users can adjust Contrast in any Mode
Sharpness| 0-5| ■   Users can adjust Sharpness in any Mode

■   Sharpness improves the clarity and details of images

Color Temperature| Cool| ■   Color Temperature default is Normal

■   Use the Up or Down Button to select and preview

mode effects.

■   Press the Middle Button to confirm and apply your

mode type

■   Users can adjust Color Temperature in

Customization mode.

Normal
Warm
Customization| R (0-

G (0-

B (0-

Screen Size| Auto| ■   Users can adjust Screen Size in any mode, any

resolution and any screen refresh rate

■   Default is Auto

4:3
16:9

Input Source

DP

Navi Key

Up / Down / Left

/ Right

| OFF| ■   Up Button default is Game Mode

■   Down Button default is Screen Assistance

■   Left Button default is Alarm Clock

■   Right Button default is Input Source

■   All Navi Key items can be adjusted via OSD Menu

Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Information on

Screen

Setting

■   Users have to press the Middle Button to confirm

and apply the Language setting

■   Language is an independent setting Users’ own language setting will override the factory default When users set Reset to Yes, Language will not be changed

English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
ไทย
Bahasa Indonesia
हिन्दी
Türkçe
(More languages

coming soon)

Transparency| 0~5| Users can adjust Transparency in any Mode
OSD Time Out| 5~30s| Users can adjust OSD Time Out in any Mode
Power Button| OFF| ■   Set to OFF, the monitor will be turned off totally.

■   Set to Standby, only panel and backlight are off, but the monitor still can be activated by OS detection, avoiding desk-top icon and screen be

refreshed

Standby
Information on Screen| | ■   The information on the monitor status will be shown on the right side of the screen

■   Users can enable or disable the Information on

Screen Default is OFF

Reset| YES| Users can Reset and restore settings to the original OSD Default in any Mode
NO

Appendix

IMPORTANT

All information is subject to change without prior notice.

Specifications

Model| Optix G241V (3BA7)

Optix G241V E2 (3BA7)

---|---
Size| 24 inch
Curvature| N/A
Panel Type| IPS
Resolution| 1920 x 1080@75Hz
Aspect Ratio| 16:9
Brightness (nits)| 250 (Typ�)
Contrast Ratio| 1000:1
Refresh Rate| 75Hz
Response Time| 4ms (GTG) (Optix G241V)

1ms (MPRT) (Optix G241V E2)

Input Interface| HDMI x1, DP x1
I/O| ■   HDMI x1

■   DisplayPort x1

■   Headphone Out x1

View Angles| 178°(H) , 178°(V)
DCI-P3/ sRGB| 81�2%/ 102�4%
Surface Treatment| Anti-glare
Display Colors| 16�7M
Power Type| External Power
Adapter Spec�| Model: ADPC2045
Power Input| 100~240Vac, 50~60Hz, 1.5A
Power Output| 20V, 2�25A
Adjustment (Tilt)| -5° ~ 20°
Kensington Lock| Yes
VESA Mounting| ■   Plate Type: 100 x 100 mm

■   Screw Type: M4x10 mm

▶ Thread Diameter: 4 mm

▶ Thread Pitch: 0 7 mm

▶ Thread Length: 10 mm

Dimension (W x H x D)| 540 3 x 422 6 x 219 6 mm
Weight| 3 3 kg (net) / 50 kg (gross)
Environment| Operating| Temperature: 0°C to 40°C

Humidity: 20% to 90%, non-condensing

Altitude: 0 ~ 5000m

Storage| Temperature: -20°C to 60°C

Humidity: 10% to 90%, non-condensing

Preset Display Modes

Standard

|

Resolution

| Optix G241V (3BA7) Optix G241V E2 (3BA7)
---|---|---
HDMI| DP
VGA| 640×480 @60Hz| V| V
640×480 @67Hz| V| V
640×480 @72Hz| V| V
640×480 @75Hz| V| V
DOS| 640×350 @70Hz| V| V
720×400 @70Hz| V| V
SVGA| 800×600 @56Hz| V| V
800×600 @60Hz| V| V
800×600 @72Hz| V| V
800×600 @75Hz| V| V
XGA| 1024×768 @60Hz| V| V
1024×768 @70Hz| V| V
1024×768 @75Hz| V| V
SXGA| 1152×864 @75Hz| V| V
1280×720 @60Hz| V| V
1280×960 @60Hz| V| V
1280×1024 @60Hz| V| V
1280×1024 @75Hz| V| V
WXGA+| 1440×900 @60Hz| V| V
WSXGA+| 1680×1050 @60Hz| V| V
Full HD| 1920×1080 @60Hz| V| V
1920×1080 @75Hz| V| V
Video Timing Resolution| 480P @60Hz| V
576P @50Hz| V
720P @50Hz| V
1080P @50Hz| V
1080P @60Hz| V

Troubleshooting

The power LED is off

• Press the monitor power button again.
• Check if the monitor power cable is properly connected. No image.
• Check if the computer graphics card is properly installed.
• Check if the computer and monitor are connected to electrical outlets and are turned on.
• Check if the monitor signal cable is properly connected.
• The computer may be in Standby mode. Press any key to activate the monitor.

The screen image is not properly sized or centered

• Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display.

No Plug & Play

• Check if the monitor power cable is properly connected.
• Check if the monitor signal cable is properly connected.
• Check if the computer and graphics card are Plug & Play compatible.

The icons, font, or screen are fuzzy, blurry, or have color problems

• Avoid using any video extension cables.
• Adjust brightness and contrast.
• Adjust RGB color or tune color temperature.
• Check if the monitor signal cable is properly connected.
• Check for bent pins on the signal cable connector.

The monitor starts flickering or shows waves

• Change the refresh rate to match the capabilities of your monitor.
• Update your graphics card drivers.
• Keep the monitor away from electrical devices that may cause electromagnetic interference (EMI).

FAQ’s

What is the screen size and resolution of the MSI Optix G241V E2?

The monitor features a 23.8-inch display with a Full HD (1920 x 1080) resolution.

What is the refresh rate of the monitor?

The MSI Optix G241V E2 has a refresh rate of 75Hz.

Does the monitor support AMD FreeSync?

Yes, the monitor supports AMD FreeSync technology, which helps to eliminate screen tearing and stuttering during gameplay.

What is the response time of the monitor?

The monitor has a response time of 4ms, which is suitable for most gaming scenarios.

Does the monitor have built-in speakers?

No, the MSI Optix G241V E2 does not have built-in speakers. You will need to use external speakers or headphones for audio.

What kind of connectivity options are available?

The monitor offers multiple connectivity options, including HDMI and VGA ports.

Does the monitor have VESA mount compatibility?

Yes, the MSI Optix G241V E2 supports VESA mount (100mm x 100mm), allowing you to mount it on compatible monitor arms or wall mounts.

Can the monitor be adjusted for height, tilt, and swivel?

No, the monitor does not have height adjustment or swivel functionality. However, you can tilt the monitor for better viewing angles.

Does the monitor have an adjustable backlight?

No, the MSI Optix G241V E2 does not have adjustable backlighting. The brightness level can be adjusted through the on-screen display (OSD) menu.

Is the monitor compatible with HDR (High Dynamic Range)?

No, the monitor does not support HDR. It has a standard dynamic range (SDR) display.

Does the monitor have an anti-glare coating?

Yes, the MSI Optix G241V E2 features an anti-glare coating, which helps to reduce reflections and glare on the screen.

What is included in the box when purchasing the monitor?

The contents of the box typically include the MSI Optix G241V E2 monitor, a power cable, an HDMI cable, a VGA cable, and a quick start guide. Note that the exact contents may vary by region or retailer, so it's always best to check the product listing or packaging.

Download this PDF Link:MSI G241V E2 Optix Series Gaming LCD Monitor User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>