MSI Optix G27C7 27-Inch Curved Gaming LCD Monitor User Manual

MSI Optix G27C7 27-Inch Curved Gaming LCD Monitor

Getting Started

This chapter provides you with information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.

Package Contents

Documentation

| Quick Start Guide
Registration Card
Warranty Card
MSI Reward Program Card

Accessories

| Stand with Screw(s)
Stand Base with Screw(s)
Power Adapter & Power Cord
Cables| HDMI Cable (Optional)
DisplayPort Cable (Optional)

Important

• Contact your place of purchase or local distributor if any of the items is damaged or missing.
• Package contents may vary by country.

Installing the Monitor Stand

1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Align and push the stand cover towards the monitor groove until it locks in place.

Important

• Place the monitor on a soft, protected surface to avoid scratching the display panel.
• Do not use any sharp objects on the panel.
• The groove for installing the stand bracket can also be used for a wall mount. Please contact your dealer for a proper wall-mount kit.

Adjusting the Monitor

This monitor is designed to maximize your viewing comfort with its adjustment capabilities.

Important
Avoid touching the display panel when adjusting the monitor.

Monitor Overview

Connecting the Monitor to PC

1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Assemble the monitor power adapter & power cord. (Figure A)
4. Connect the power adapter to the monitor power jack. (Figure B)
5. Plug the power cord into the electrical outlet. (Figure C)
6. Turn on the monitor. (Figure D)
7. Power on the computer and the monitor will auto-detect the signal source.
   

OSD Setup

This chapter provides you with essential information on OSD Setup.

Important
All information is subject to change without prior notice.

Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu.

Up/Down/Left/Right:

• selecting function menus and items
• adjusting function values
• entering into/exiting from function menus

Press (OK):

• launching the On-Screen Display (OSD)
• entering submenus
• confirming a selection or setting

Hot Key

• Users may enter into Game Mode, Screen Assistance, Alarm Clock, and Input Source function menus by moving the Navi Key up, down, left or right when the OSD menu is inactive.
• Users may customize their own Hot Keys to enter into different function menus.

OSD Menus

Gaming

∙ Use Up or Down Button to select and preview mode effects.

∙ Press the OK Button to confirm and apply your mode type.

FPS
Racing
RTS
RPG
Night Vision| OFF| ∙ This function optimizes background brightness and is recommended for FPS games.
Normal
Strong
Strongest
A.I.
Response Time| Normal| ∙ Users can adjust Response Time in any mode.

∙ Response Time will be grayed out while MPRT is enabled.

Fast
Fastest
1st Level Menu| 2nd/3rd Level Menu| Description
---|---|---
MPRT| OFF| ∙ When MPRT is enabled, Brightness cannot be enabled and will be grayed out.

∙ MPRT and HDCR cannot be enabled simultaneously.

∙ Response time will be grayed out while MPRT is enabled.

∙ MPRT has to be disabled while FreeSync Premium is set to ON.

ON
Refresh Rate| Location| Left Top| ∙ Users can adjust Refresh Rate in any mode.

∙ Default Refresh Rate Location is Left Top. Location is adjustable in OSD Menu. Press the OK Button to confirm and apply your Refresh Rate Location.

∙ This monitor follows and works at the Operating System’s preset Screen Refresh Rate.

Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock| Location| Left Top| ∙ Users can adjust Alarm Clock in any mode.

∙ After setting the time, press the OK Button to activate the timer.

∙ Default Alarm Clock Location is Left Top. Users can select their own location.

Right Top
Left Bottom
Right Bottom
OFF
15:00| 00:01 ~

99:59

30:00
45:00
60:00
Screen Assistance| None| ∙ Users can adjust Screen Assistance in any mode.

∙ Screen Assistance default is None.

∙ DisplayPort or HDMI default is OFF and can be adjusted ON/OFF in any mode, any resolution, any input source and any screen refresh rate.

∙ MPRT will be disabled if FreeSync Premium is enabled.

ON

Professional

∙ All items can be adjusted by users.

∙ Use Up or Down Button to select and preview mode effects.

∙ Press the OK Button to confirm and apply your mode type.

Anti-Blue
Movie
Office
sRGB
Low Blue Light| OFF| ∙ Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow.

∙ Users can adjust Low Blue Light in any mode.

∙ When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light.

ON
HDCR| OFF| ∙ Users can adjust HDCR in any mode.

∙ HDCR enhances image quality by increasing the contrast of images.

∙ When HDCR is set to ON, Brightness will be grayed out.

∙ HDCR and MPRT cannot be enabled simultaneously.

ON
MPRT| OFF| ∙ When MPRT is enabled, Brightness cannot be enabled and will be grayed out.

∙ MPRT and HDCR cannot be enabled simultaneously.

∙ Response time will be grayed out while MPRT is enabled.

∙ MPRT has to be disabled while FreeSync Premium is set to ON.

ON
1st Level Menu| 2nd Level Menu| Description
---|---|---
Image Enhancement| OFF| ∙ Image Enhancement enhances image edges to improve their acutance.

∙ Users can adjust Image Enhancement in any mode.

Weak
Medium
Strong
Strongest

Image

∙ Brightness will be grayed out when MPRT or HDCR are enabled.

Contrast| 0-100| ∙ Users can adjust Contrast in any mode.

∙ When Pro Mode is set to sRGB, Contrast will be grayed out.

Sharpness| 0-5| ∙ Users can adjust Sharpness in any mode.

∙ Sharpness improves clarity and details of images.

Color Temperature| Cool| ∙ Color Temperature default is Normal.

∙ Use Up or Down Button to select and preview mode effects.

∙ Press the OK Button to confirm and apply your mode type.

∙ Users can adjust Color Temperature in Customization mode.

Normal
Warm
Customization| R (0-100)
G (0-100)
B (0-100)
Screen Size| Auto| ∙ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate.

∙ Default is Auto.

4:3
16:9

Input Source

HDMI2
DP
Auto Scan| OFF| ∙ Users can use the Navi Key to select Input Source at below status:

• While “Auto Scan” is set to “OFF” with the monitor at power saving mode;

• While “No Signal” message box is shown on the monitor.

ON (Default)

Navi Key

Up / Down / Left

/ Right

| OFF| ∙ Up Button default is Game Mode.

∙ Down Button default is Screen Assistance.

∙ Left Button default is Alarm Clock.

∙ Right Button default is Input Source.

∙ All Navi Key items can be adjusted via OSD Menus.

Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Info. On Screen
Night Vision

Setting

∙ Users have to press the OK Button to confirm and apply the Language setting.

∙ Language is an independent setting. Users’ own language setting will override the factory default. When users set Reset to Yes, Language will not be changed.

English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
Bahasa Indonesia
Türkçe
(More languages coming soon)
Transparency| 0~5| ∙ Users can adjust Transparency in any mode.
OSD Time Out| 5~30s| ∙ Users can adjust OSD Time Out in any mode.
Power Button| OFF| ∙ When set to OFF, users can press the power button to turn off the monitor.
Standby| ∙ When set to Standby, users can press the power button to turn off the panel and backlight.
Info. On Screen| OFF| ∙ The information of the monitor status will be shown on the right side of the screen.

∙ Users can enable or disable the Info. On Screen. Default is OFF.

ON
1st Level Menu| 2nd Level Menu| Description
---|---|---
HDMI CEC| OFF| ∙ Default is OFF.

∙ HDMI CEC (Consumer Electronics Control) supports Sony PlayStation®, Nintendo® Switch™, and various audio-visual devices that are CEC-capable.

∙ If HDMI CEC is set to ON:

• The monitor will automatically power on when the CEC device is turned on.

• The CEC device will enter power saving mode when the monitor is turned off.

• When Sony PlayStation® or Nintendo® Switch™ is connected, Game and Pro Mode will be automatically set to User mode (Default) and can be adjusted to users’ preferred modes later.

ON
Reset| YES| ∙ Users can Reset and restore settings to original OSD Default in any mode.
NO

Specifications

I/O

| ∙ HDMI x 2

∙ DP x 1

∙ Headphone Out x 1

View Angles| 178°(H) , 178°(V)
*DCI-P3/ sRGB| 93% / 118%
Surface Treatment| Anti-glare
Display Colors| 16.7M (8bit)
Power Adapter Specs| Option 1: Delta ADP-40KD BB Option 2: APD DA-40A19
Power Input| 100~240Vac, 50~60Hz, 1A
Power Output| 19V     2.1A
Adjustment (Tilt)| -5° ~ 20°
Kensington Lock**| Yes

VESA Mounting

| ∙ Plate Type: 100 x 100 mm

∙ Screw Type: M4 x 10 mm

• Thread Diameter: 4 mm

• Thread Pitch: 0.7 mm

• Thread Length: 10 mm

7.0 Kg (gross)

Environment

| ****

Operating

| ∙ Temperature: 0℃ to 40℃

∙ Humidity: 20% to 90%, non-condensing

∙ Altitude: 0 ~ 5000m

Storage| ∙ Temperature: -20℃ to 60℃

∙ Humidity: 10% to 90%, non-condensing

Preset Display Modes

Standard| Resolution| Optix G27C7

HDMI DP

---|---|---
|
VGA| 640×480| @60Hz| V| V
@67Hz| V| V
@72Hz| V| V
@75Hz| V| V
Dos-Mode| 720×480| @60Hz| V| V
720×576| @50Hz| V| V
SVGA| 800×600| @56Hz| V| V
@60Hz| V| V
@72Hz| V| V
@75Hz| V| V
XGA| 1024×768| @60Hz| V| V
@70Hz| V| V
@75Hz| V| V
SXGA| 1280×1024| @60Hz| V| V
@75Hz| V| V
WXGA+| 1440×900| @60Hz| V| V
WSXGA+| 1680×1050| @60Hz| V| V
Full HD| 1920×1080| @60Hz| V| V
@85Hz| V| V
@120Hz| V| V
@144Hz| V| V
@165Hz| V| V
Video Timing Resolution| 480P| V| V
576P| V| V
720P| V| V
1080P @60Hz| V| V
1080P @120Hz| V| V

Troubleshooting

The power LED is off.

• Press the monitor power button
• Check if the monitor power cable is properly

No image.

• Check if the computer graphics card is properly
• Check if the computer and monitor are connected to electrical outlets and are turned
• Check if the monitor signal cable is properly
• The computer may be in Standby Press any key to activate the monitor.

The screen image is not properly sized or centered.

• Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display.

No Plug & Play.

• Check if the monitor power cable is properly
• Check if the monitor signal cable is properly
• Check if the computer and graphics card are Plug & Play

The icons, font or screen are fuzzy, blurry or have color problems.

• Avoid using any video extension
• Adjust brightness and
• Adjust RGB color or tune color
• Check if the monitor signal cable is properly
• Check for bent pins on the signal cable

The monitor starts flickering or shows waves.

• Change the refresh rate to match the capabilities of your
• Update your graphics card
• Keep the monitor away from electrical devices that may cause electromagnetic interference (EMI).

Safety Instructions

• Read the safety instructions carefully and

• All cautions and warnings on the device or user’s manual should be

• Refer servicing to qualified personnel

• Keep the User’s Guide that comes with the package for future

• To prevent fire or shock hazards, keep this device away from humidity and high

• Lay this device on a reliable flat surface before setting it

• Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power Do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket outlet.

• Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy

• The ventilator on the device is used for air convection and to prevent the device from Do not cover the ventilator.

• Do not leave the device in an unconditioned environment with a storage temperature above 60℃ or below -20℃, which may damage the device.
  NOTE: The maximum operating temperature is around 40℃.

• When cleaning the device, be sure to remove the power Use a piece of soft cloth rather than industrial chemicals to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock.

• Place the power cord in a way that people are unlikely to step on Do not place anything on the power cord.

• Always keep strong magnetic or electrical objects away from the

• If any of the following situations arises, get the device checked by service personnel:

  • The power cord or plug is
  • Liquid has penetrated into the
  • The device has been exposed to
  • The device does not work well or you can not get it to work according to user’s
  • The device has dropped and
  • The device has obvious signs of

• To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed object with an anti-tip fastener that helps to properly support the monitor and keep it safe in place.

Important
Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum).

TÜV Rheinland Certification

TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.

• Place the screen 20 – 28 inches (50 – 70 cm) away from your eyes and a little below eye level.
• Consciously blinking the eyes every now and then will help to reduce eye strain after extended screen time.
• Take breaks for 20 minutes every 2 hours.
• Look away from the screen and gaze at a distant object for at least 20 seconds during breaks.
• Make stretches to relieve body fatigue or pain during breaks.
• Use the Reader/Anti-Blue mode or turn on the optional Low Blue Light function.

TÜV Rheinland Flicker Free Certification

• TÜV Rheinland has tested this product to ascertain whether the display produces visible and invisible flicker for the human eye and therefore strains the eyes of users.
• TÜV Rheinland has defined a catalog of tests, which sets out minimum standards at various frequency ranges. The test catalog is based on internationally applicable standards or standards common within the industry and exceeds these requirements.
• The product has been tested in the laboratory according to these criteria.
• The keyword “Flicker Free” confirms that the device has no visible and invisible flicker defined in this standard within the range of 0 – 3000 Hz under various brightness settings.
• The display will not support Flicker-Free when Anti Motion Blur/MPRT is enabled. (The availability of Anti Motion Blur/MPRT varies by product.)

Regulatory Notices

CE Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of the Official Journal of the European Union.

FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com

WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.

Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html

RoHS Statement

Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006.
https://storage-asset.msi.com/html/popup/csr/cemm_jp.html

India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey.

Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.

Green Product Features

• Reduced energy consumption during use and stand-by
• Limited use of substances harmful to the environment and health
• Easily dismantled and recycled
• Reduced use of natural resources by encouraging recycling
• Extended product lifetime through easy upgrades
• Reduced solid waste production through a take-back policy

Environmental Policy

• The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized point of collection for recycling and dispose of their end-of-life products.
• Visit the MSI website and locate a nearby distributor for further recycling information.
• Users may also reach us at gpcontdev@msi.com for information regarding the proper disposal, take-back, recycling, and disassembly of MSI products.

Warning!
Overuse of screens is likely to affect eyesight.

Recommendations:

1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day.

Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.

Technical Support
If a problem arises with your product and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.

FAQ’s

What is the screen size of the MSI Optix G27C7 monitor?

The MSI Optix G27C7 features a 27-inch screen size.

What is the display type of the monitor?

The MSI Optix G27C7 is a curved gaming LCD monitor.

What is the curvature of the monitor?

The monitor has a 1500R curvature, providing an immersive viewing experience.

What is the refresh rate of the MSI Optix G27C7?

The monitor has a high refresh rate of 165Hz, allowing for smooth and fluid gameplay.

Does the MSI Optix G27C7 support AMD FreeSync?

Yes, the monitor supports AMD FreeSync technology, which reduces screen tearing and stuttering for a better gaming experience.

What is the response time of the MSI Optix G27C7?

The monitor offers a fast 1ms response time, minimizing motion blur and ghosting in fast-paced games.

Does the MSI Optix G27C7 have built-in speakers?

No, the monitor does not have built-in speakers. You can connect external speakers or use headphones for audio output.

What is the resolution of the MSI Optix G27C7?

The monitor features a Full HD (1920 x 1080) resolution.

Can I adjust the monitor's settings easily?

Yes, the MSI Optix G27C7 comes with an intuitive OSD (On-Screen Display) menu, allowing you to adjust settings such as brightness, contrast, and color.

Does the monitor have customizable RGB lighting?

Yes, the MSI Optix G27C7 has customizable RGB lighting on the back of the monitor, creating an immersive gaming ambiance.

What connectivity options are available on the MSI Optix G27C7?

The monitor includes various connectivity options, including DisplayPort 1.2, HDMI 1.4, and a headphone jack.

Does the MSI Optix G27C7 support VESA mounting?

Yes, the monitor is VESA mount compatible, allowing you to mount it on compatible monitor stands or wall mounts.

Download The PDF Link:MSI Optix G27C7 27-Inch Curved Gaming LCD Monitor User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>